diff options
Diffstat (limited to 'zsh/theme/README.md')
| -rw-r--r-- | zsh/theme/README.md | 2107 |
1 files changed, 2107 insertions, 0 deletions
diff --git a/zsh/theme/README.md b/zsh/theme/README.md new file mode 100644 index 0000000..884cb21 --- /dev/null +++ b/zsh/theme/README.md @@ -0,0 +1,2107 @@ +# Powerlevel10k +[]( + https://gitter.im/powerlevel10k/community?utm_source=badge&utm_medium=badge&utm_campaign=pr-badge) + +- **THE PROJECT HAS VERY LIMITED SUPPORT** +- **NO NEW FEATURES ARE IN THE WORKS** +- **MOST BUGS WILL GO UNFIXED** +- **HELP REQUESTS WILL BE IGNORED** + +Powerlevel10k is a theme for Zsh. It emphasizes [speed](#uncompromising-performance), +[flexibility](#extremely-customizable) and [out-of-the-box experience](#configuration-wizard). + + + +- [Getting started](#getting-started) +- [Features](#features) +- [Installation](#installation) +- [Configuration](#configuration) +- [Fonts](#fonts) +- [Try it in Docker](#try-it-in-docker) +- [License](#license) +- [FAQ](#faq) +- [Troubleshooting](#troubleshooting) + +## Getting started + +1. [Install the recommended font](#meslo-nerd-font-patched-for-powerlevel10k). *Optional but highly + recommended.* +1. [Install Powerlevel10k](#installation) itself. +1. Restart Zsh with `exec zsh`. +1. Type `p10k configure` if the configuration wizard doesn't start automatically. + +## Features + +- [Configuration wizard](#configuration-wizard) +- [Uncompromising performance](#uncompromising-performance) +- [Powerlevel9k compatibility](#powerlevel9k-compatibility) +- [Pure compatibility](#pure-compatibility) +- [Instant prompt](#instant-prompt) +- [Show on command](#show-on-command) +- [Transient prompt](#transient-prompt) +- [Current directory that just works](#current-directory-that-just-works) +- [Extremely customizable](#extremely-customizable) +- [Batteries included](#batteries-included) +- [Extensible](#extensible) + +### Configuration wizard + +Type `p10k configure` to access the builtin configuration wizard right from your terminal. + +<details> + <summary>Screen recording</summary> + +  +</details> + +All styles except [Pure](#pure-compatibility) are functionally equivalent. They display the same +information and differ only in presentation. + +Configuration wizard creates `~/.p10k.zsh` based on your preferences. Additional prompt +customization can be done by editing this file. It has plenty of comments to help you navigate +through configuration options. + +*Tip*: Install [the recommended font](#meslo-nerd-font-patched-for-powerlevel10k) before +running `p10k configure` to unlock all prompt styles. + +*FAQ:* + +- [What is the best prompt style in the configuration wizard?]( + #what-is-the-best-prompt-style-in-the-configuration-wizard) +- [What do different symbols in Git status mean?]( + #what-do-different-symbols-in-git-status-mean) +- [How do I change prompt colors?](#how-do-i-change-prompt-colors) + +*Troubleshooting*: + +- [Some prompt styles are missing from the configuration wizard]( + #some-prompt-styles-are-missing-from-the-configuration-wizard). +- [Question mark in prompt](#question-mark-in-prompt). +- [Icons, glyphs or powerline symbols don't render](#icons-glyphs-or-powerline-symbols-dont-render). +- [Sub-pixel imperfections around powerline symbols]( + #sub-pixel-imperfections-around-powerline-symbols). +- [Directory is difficult to see in prompt when using Rainbow style]( + #directory-is-difficult-to-see-in-prompt-when-using-rainbow-style). + +### Uncompromising performance + +When you hit *ENTER*, the next prompt appears instantly. With Powerlevel10k there is no prompt lag. +If you install Cygwin on Raspberry Pi, `cd` into a Linux Git repository and activate enough prompt +segments to fill four prompt lines on both sides of the screen... wait, that's just crazy and no +one ever does that. Probably impossible, too. The point is, Powerlevel10k prompt is always fast, no +matter what you do! + +<details> + <summary>Screen recording</summary> + +  +</details> + +Note how the effect of every command is instantly reflected by the very next prompt. + +| Command | Prompt Indicator | Meaning | +|-------------------------------|:----------------:|----------------------------------------------------------------------:| +| `timew start hack linux` | `⌚ hack linux` | time tracking enabled in [timewarrior](https://timewarrior.net/) | +| `touch x y` | `?2` | 2 untracked files in the Git repo | +| `rm COPYING` | `!1` | 1 unstaged change in the Git repo | +| `echo 3.7.3 >.python-version` | `🐍 3.7.3` | the current python version in [pyenv](https://github.com/pyenv/pyenv) | + +Other Zsh themes capable of displaying the same information either produce prompt lag or print +prompt that doesn't reflect the current state of the system and then refresh it later. With +Powerlevel10k you get fast prompt *and* up-to-date information. + +*FAQ*: [Is it really fast?](#is-it-really-fast) + +### Powerlevel9k compatibility + +Powerlevel10k understands all [Powerlevel9k](https://github.com/Powerlevel9k/powerlevel9k) +configuration parameters. + +<details> + <summary>Screen recording</summary> + +  +</details> + +[Migration](#installation) from Powerlevel9k to Powerlevel10k is a straightforward process. All +your `POWERLEVEL9K` configuration parameters will still work. Prompt will look the same as before +([almost]( + #does-powerlevel10k-always-render-exactly-the-same-prompt-as-powerlevel9k-given-the-same-config)) +but it will be [much faster](#uncompromising-performance) ([certainly](#is-it-really-fast)). + +*FAQ*: + +- [I'm using Powerlevel9k with Oh My Zsh. How do I migrate?]( + #im-using-powerlevel9k-with-oh-my-zsh-how-do-i-migrate) +- [Does Powerlevel10k always render exactly the same prompt as Powerlevel9k given the same config?]( + #does-powerlevel10k-always-render-exactly-the-same-prompt-as-powerlevel9k-given-the-same-config) +- [What is the relationship between Powerlevel9k and Powerlevel10k?]( + #What-is-the-relationship-between-powerlevel9k-and-powerlevel10k) + +### Pure compatibility + +Powerlevel10k can produce the same prompt as [Pure](https://github.com/sindresorhus/pure). Type +`p10k configure` and select *Pure* style. + +<details> + <summary>Screen recording</summary> + +  +</details> + +You can still use Powerlevel10k features such as [transient prompt](#transient-prompt) or +[instant prompt](#instant-prompt) when sporting Pure style. + +To customize prompt, edit `~/.p10k.zsh`. Powerlevel10k doesn't recognize Pure configuration +parameters, so you'll need to use `POWERLEVEL9K_COMMAND_EXECUTION_TIME_THRESHOLD=3` instead of +`PURE_CMD_MAX_EXEC_TIME=3`, etc. All relevant parameters are in `~/.p10k.zsh`. This file has +plenty of comments to help you navigate through it. + +*FAQ:* [What is the best prompt style in the configuration wizard?]( + #what-is-the-best-prompt-style-in-the-configuration-wizard) + +### <a name='what-is-instant-prompt'></a>Instant prompt + +If your `~/.zshrc` loads many plugins, or perhaps just a few slow ones +(for example, [pyenv](https://github.com/pyenv/pyenv) or [nvm](https://github.com/nvm-sh/nvm)), you +may have noticed that it takes some time for Zsh to start. + +<details> + <summary>Screen recording</summary> + +  +</details> + +Powerlevel10k can remove Zsh startup lag **even if it's not caused by a theme**. + +<details> + <summary>Screen recording</summary> + +  +</details> + +This feature is called *Instant Prompt*. You need to explicitly enable it through `p10k configure` +or [manually](#how-do-i-configure-instant-prompt). It does what it says on the tin -- prints prompt +instantly upon Zsh startup allowing you to start typing while plugins are still loading. + +Other themes *increase* Zsh startup lag -- some by a lot, others by a just a little. Powerlevel10k +*removes* it outright. + +If you are curious about how *Instant Prompt* works, see +[this section in zsh-bench](https://github.com/romkatv/zsh-bench#instant-prompt). + +*FAQ:* [How do I configure instant prompt?](#how-do-i-configure-instant-prompt) + +### Show on command + +The behavior of some commands depends on global environment. For example, `kubectl run ...` runs an +image on the cluster defined by the current kubernetes context. If you frequently change context +between "prod" and "testing", you might want to display the current context in Zsh prompt. If you do +likewise for AWS, Azure and Google Cloud credentials, prompt will get pretty crowded. + +Enter *Show On Command*. This feature makes prompt segments appear only when they are relevant to +the command you are currently typing. + +<details> + <summary>Screen recording</summary> + +  +</details> + +Configs created by `p10k configure` enable show on command for several prompt segments by default. +Here's the relevant parameter for kubernetes context: + +```zsh +# Show prompt segment "kubecontext" only when the command you are typing invokes one of these tools. +typeset -g POWERLEVEL9K_KUBECONTEXT_SHOW_ON_COMMAND='kubectl|helm|kubens' +``` + +To customize when different prompt segments are shown, open `~/.p10k.zsh`, search for +`SHOW_ON_COMMAND` and either remove these parameters to display affected segments unconditionally, +or change their values. + +### Transient prompt + +When *Transient Prompt* is enabled through `p10k configure`, Powerlevel10k will trim down every +prompt when accepting a command line. + +<details> + <summary>Screen recording</summary> + +  +</details> + +Transient prompt makes it much easier to copy-paste series of commands from the terminal scrollback. + +*Tip*: If you enable transient prompt, take advantage of two-line prompt. You'll get the benefit of +extra space for typing commands without the usual drawback of reduced scrollback density. Sparse +prompt (with an empty line before prompt) also works great in combination with transient prompt. + +### Current directory that just works + +The current working directory is perhaps the most important prompt segment. Powerlevel10k goes to +great length to highlight its important parts and to truncate it with the least loss of information +when horizontal space gets scarce. + +<details> + <summary>Screen recording</summary> + +  +</details> + +When the full directory doesn't fit, the leftmost segment gets truncated to its shortest unique +prefix. In the screencast, `~/work` becomes `~/wo`. It couldn't be truncated to `~/w` because it +would be ambiguous (there was `~/wireguard` when the session was recorded). The next segment -- +`projects` -- turns into `p` as there was nothing else that started with `p` in `~/work/`. + +Directory segments are shown in one of three colors: + +- Truncated segments are bleak. +- Important segments are bright and never truncated. These include the first and the last segment, + roots of Git repositories, etc. +- Regular segments (not truncated but can be) use in-between color. + +*Tip*: If you copy-paste a truncated directory and hit *TAB*, it'll complete to the original. + +*Troubleshooting*: [Directory is difficult to see in prompt when using Rainbow style.]( + #directory-is-difficult-to-see-in-prompt-when-using-rainbow-style) + +### Extremely customizable + +Powerlevel10k can be configured to look like any other Zsh theme out there. + +<details> + <summary>Screen recording</summary> + +  +</details> + +[Pure](#pure-compatibility), [Powerlevel9k](#powerlevel9k-compatibility) and [robbyrussell]( + #how-to-make-powerlevel10k-look-like-robbyrussell-oh-my-zsh-theme) emulations are built-in. +To emulate the appearance of other themes, you'll need to write a suitable configuration file. The +best way to go about it is to run `p10k configure`, select the style that is the closest to your +goal and then edit `~/.p10k.zsh`. + +The full range of Powerlevel10k appearance spans from spartan: + + + +To ~~ridiculous~~ extravagant: + + + +### Batteries included + +Powerlevel10k comes with dozens of built-in high quality prompt segments that can display +information from a variety of sources. When you run `p10k configure` and choose any style +except [Pure](#pure-compatibility), many of these segments get enabled by +default while others can be manually enabled by opening `~/.p10k.zsh` and uncommenting them. +You can enable as many segments as you like. It won't slow down your prompt or Zsh startup. + +| Segment | Meaning | +|--------:|---------| +| `anaconda` | virtual environment from [conda](https://conda.io/) | +| `asdf` | tool versions from [asdf](https://github.com/asdf-vm/asdf) | +| `aws` | [aws profile](https://docs.aws.amazon.com/cli/latest/userguide/cli-configure-profiles.html) | +| `aws_eb_env` | [aws elastic beanstalk](https://aws.amazon.com/elasticbeanstalk/) environment | +| `azure` | [azure](https://docs.microsoft.com/en-us/cli/azure) account name | +| `background_jobs` | presence of background jobs | +| `battery` | internal battery state and charge level (yep, batteries *literally* included) | +| `command_execution_time` | duration (wall time) of the last command | +| `context` | user@hostname | +| `cpu_arch` | CPU architecture | +| `dir` | current working directory | +| `direnv` | [direnv](https://direnv.net/) status | +| `disk_usage` | disk usage | +| `dotnet_version` | [dotnet](https://dotnet.microsoft.com) version | +| `fvm` | flutter environment from [fvm](https://github.com/leoafarias/fvm) | +| `gcloud` | [google cloud](https://cloud.google.com/) cli account and project | +| `goenv` | go environment from [goenv](https://github.com/syndbg/goenv) | +| `google_app_cred` | [google application credentials](https://cloud.google.com/docs/authentication/production) | +| `go_version` | [go](https://golang.org) version | +| `haskell_stack` | haskell version from [stack](https://haskellstack.org/) | +| `ip` | IP address and bandwidth usage for a specified network interface | +| `java_version` | [java](https://www.java.com/) version | +| `jenv` | java environment from [jenv](https://github.com/jenv/jenv) | +| `kubecontext` | current [kubernetes](https://kubernetes.io/) context | +| `laravel_version` | [laravel php framework](https://laravel.com/) version | +| `load` | CPU load | +| `luaenv` | lua environment from [luaenv](https://github.com/cehoffman/luaenv) | +| `midnight_commander` | [midnight commander](https://midnight-commander.org/) shell | +| `nix_shell` | [nix shell](https://nixos.org/nixos/nix-pills/developing-with-nix-shell.html) indicator | +| `nnn` | [nnn](https://github.com/jarun/nnn) shell | +| `lf` | [lf](https://github.com/gokcehan/lf) shell | +| `chezmoi_shell` | [chezmoi](https://www.chezmoi.io/) shell | +| `nodeenv` | node.js environment from [nodeenv](https://github.com/ekalinin/nodeenv) | +| `nodenv` | node.js environment from [nodenv](https://github.com/nodenv/nodenv) | +| `node_version` | [node.js](https://nodejs.org/) version | +| `nordvpn` | [nordvpn](https://nordvpn.com/) connection status | +| `nvm` | node.js environment from [nvm](https://github.com/nvm-sh/nvm) | +| `os_icon` | your OS logo (apple for macOS, swirl for debian, etc.) | +| `package` | `name@version` from [package.json](https://docs.npmjs.com/files/package.json) | +| `per_directory_history` | Oh My Zsh [per-directory-history](https://github.com/jimhester/per-directory-history) local/global indicator | +| `perlbrew` | perl version from [perlbrew](https://github.com/gugod/App-perlbrew) | +| `phpenv` | php environment from [phpenv](https://github.com/phpenv/phpenv) | +| `php_version` | [php](https://www.php.net/) version | +| `plenv` | perl environment from [plenv](https://github.com/tokuhirom/plenv) | +| `prompt_char` | multi-functional prompt symbol; changes depending on vi mode: `❯`, `❮`, `V`, `▶` for insert, command, visual and replace mode respectively; turns red on error | +| `proxy` | system-wide http/https/ftp proxy | +| `public_ip` | public IP address | +| `pyenv` | python environment from [pyenv](https://github.com/pyenv/pyenv) | +| `ram` | free RAM | +| `ranger` | [ranger](https://github.com/ranger/ranger) shell | +| `yazi` | [yazi](https://github.com/sxyazi/yazi) shell | +| `rbenv` | ruby environment from [rbenv](https://github.com/rbenv/rbenv) | +| `rust_version` | [rustc](https://www.rust-lang.org) version | +| `rvm` | ruby environment from [rvm](https://rvm.io) | +| `scalaenv` | scala version from [scalaenv](https://github.com/scalaenv/scalaenv) | +| `status` | exit code of the last command | +| `swap` | used swap | +| `taskwarrior` | [taskwarrior](https://taskwarrior.org/) task count | +| `terraform` | [terraform](https://www.terraform.io) workspace | +| `terraform_version` | [terraform](https://www.terraform.io) version | +| `time` | current time | +| `timewarrior` | [timewarrior](https://timewarrior.net/) tracking status | +| `todo` | [todo](https://github.com/todotxt/todo.txt-cli) items | +| `toolbox` | [toolbox](https://github.com/containers/toolbox) name | +| `vcs` | Git repository status | +| `vim_shell` | [vim](https://www.vim.org/) shell (`:sh`) | +| `virtualenv` | python environment from [venv](https://docs.python.org/3/library/venv.html) | +| `vi_mode` | vi mode (you don't need this if you've enabled prompt_char) | +| `vpn_ip` | virtual private network indicator | +| `wifi` | WiFi speed | +| `xplr` | [xplr](https://github.com/sayanarijit/xplr) shell | + +### Extensible + +If there is no prompt segment that does what you need, implement your own. Powerlevel10k provides +public API for defining segments that are as fast and as flexible as built-in ones. + +<details> + <summary>Screen recording</summary> + +  +</details> + +On Linux you can fetch current CPU temperature by reading `/sys/class/thermal/thermal_zone0/temp`. +The screencast shows how to define a prompt segment to display this value. Once the segment is +defined, you can use it like any other segment. All standard customization parameters will work for +it out of the box. + +Type `p10k help segment` for reference. + +*Note*: If you modify `POWERLEVEL9K_*` parameters in an already initialized interactive shell (as +opposed to editing `~/.p10k.zsh`), the changes might not be immediately effective. To apply the +modifications, invoke `p10k reload`. Setting `POWERLEVEL9K_DISABLE_HOT_RELOAD=false` eliminates the +necessity for `p10k reload` but results in a marginally slower prompt. + +*Tip*: Prefix names of your own segments with `my_` to avoid clashes with future versions of +Powerlevel10k. + +## Installation + +- [Manual](#manual) 👈 **choose this if confused or uncertain** +- [Oh My Zsh](#oh-my-zsh) +- [Prezto](#prezto) +- [Zim](#zim) +- [Antibody](#antibody) +- [Antidote](#antidote) +- [Antigen](#antigen) +- [Zplug](#zplug) +- [Zgen](#zgen) +- [Zplugin](#zplugin) +- [Zinit](#zinit) +- [Zi](#zi) +- [Zap](#zap) +- [Homebrew](#homebrew) +- [Arch Linux](#arch-linux) +- [Alpine Linux](#alpine-linux) +- [Fig](#fig) + +### Manual + +```zsh +git clone --depth=1 https://github.com/romkatv/powerlevel10k.git ~/powerlevel10k +echo 'source ~/powerlevel10k/powerlevel10k.zsh-theme' >>~/.zshrc +``` + +Users in China can use the official mirror on gitee.com for faster download.<br> +中国用户可以使用 gitee.com 上的官方镜像加速下载. + +```zsh +git clone --depth=1 https://gitee.com/romkatv/powerlevel10k.git ~/powerlevel10k +echo 'source ~/powerlevel10k/powerlevel10k.zsh-theme' >>~/.zshrc +``` + +This is the simplest kind of installation and it works even if you are using a plugin manager. Just +make sure to disable the current theme in your plugin manager. See +[troubleshooting](#cannot-make-powerlevel10k-work-with-my-plugin-manager) for help. + +### Oh My Zsh + +1. Clone the repository: + ```zsh + git clone --depth=1 https://github.com/romkatv/powerlevel10k.git ${ZSH_CUSTOM:-$HOME/.oh-my-zsh/custom}/themes/powerlevel10k + ``` + Users in China can use the official mirror on gitee.com for faster download.<br> + 中国用户可以使用 gitee.com 上的官方镜像加速下载. + + ```zsh + git clone --depth=1 https://gitee.com/romkatv/powerlevel10k.git ${ZSH_CUSTOM:-$HOME/.oh-my-zsh/custom}/themes/powerlevel10k + ``` +2. Set `ZSH_THEME="powerlevel10k/powerlevel10k"` in `~/.zshrc`. + +### Prezto + +Add `zstyle :prezto:module:prompt theme powerlevel10k` to `~/.zpreztorc`. + +### Zim + +Add `zmodule romkatv/powerlevel10k --use degit` to `~/.zimrc` and run `zimfw install`. + +### Antibody + +Add `antibody bundle romkatv/powerlevel10k` to `~/.zshrc`. + +### Antidote + +Add `romkatv/powerlevel10k` to `~/.zsh_plugins.txt`. + +### Antigen + +Add `antigen theme romkatv/powerlevel10k` to `~/.zshrc`. Make sure you have `antigen apply` +somewhere after it. + +### Zplug + +Add `zplug romkatv/powerlevel10k, as:theme, depth:1` to `~/.zshrc`. + +### Zgen + +Add `zgen load romkatv/powerlevel10k powerlevel10k` to `~/.zshrc`. + +### Zplugin + +Add `zplugin ice depth=1; zplugin light romkatv/powerlevel10k` to `~/.zshrc`. + +The use of `depth=1` ice is optional. Other types of ice are neither recommended nor officially +supported by Powerlevel10k. + +### Zinit + +Add `zinit ice depth=1; zinit light romkatv/powerlevel10k` to `~/.zshrc`. + +The use of `depth=1` ice is optional. Other types of ice are neither recommended nor officially +supported by Powerlevel10k. + +### Zi + +Add `zi ice depth=1; zi light romkatv/powerlevel10k` to `~/.zshrc`. + +The use of `depth=1` ice is optional. Other types of ice are neither recommended nor officially +supported by Powerlevel10k. + +### Zap + +Add `plug "romkatv/powerlevel10k"` to `~/.zshrc`. + +### Homebrew + +```zsh +brew install powerlevel10k +echo "source $(brew --prefix)/share/powerlevel10k/powerlevel10k.zsh-theme" >>~/.zshrc +``` + +### Arch Linux + +```zsh +yay -S --noconfirm zsh-theme-powerlevel10k-git +echo 'source /usr/share/zsh-theme-powerlevel10k/powerlevel10k.zsh-theme' >>~/.zshrc +``` + +[zsh-theme-powerlevel10k-git](https://aur.archlinux.org/packages/zsh-theme-powerlevel10k-git/) +referenced above is the official Powerlevel10k package. + +There is also [zsh-theme-powerlevel10k]( + https://www.archlinux.org/packages/extra/x86_64/zsh-theme-powerlevel10k/) package. +Historically, [it has been breaking often and for extended periods of time]( + https://github.com/romkatv/powerlevel10k/pull/786). **Do not use it.** + +### Alpine Linux + +```zsh +apk add zsh zsh-theme-powerlevel10k +mkdir -p ~/.local/share/zsh/plugins +ln -s /usr/share/zsh/plugins/powerlevel10k ~/.local/share/zsh/plugins/ +``` + +### Fig + +Follow the instructions on +[this page](https://fig.io/plugins/other/powerlevel10k). + +## Configuration + +- [For new users](#for-new-users) +- [For Powerlevel9k users](#for-powerlevel9k-users) + +### For new users + +On the first run, Powerlevel10k [configuration wizard](#configuration-wizard) will ask you a few +questions and configure your prompt. If it doesn't trigger automatically, type `p10k configure`. +Configuration wizard creates `~/.p10k.zsh` based on your preferences. Additional prompt +customization can be done by editing this file. It has plenty of comments to help you navigate +through configuration options. + +*FAQ*: + +- [What is the best prompt style in the configuration wizard?]( + #what-is-the-best-prompt-style-in-the-configuration-wizard) +- [What do different symbols in Git status mean?]( + #what-do-different-symbols-in-git-status-mean) +- [How do I change the format of Git status?](#how-do-i-change-the-format-of-git-status) +- [How do I add username and/or hostname to prompt?]( + #how-do-i-add-username-andor-hostname-to-prompt) +- [How do I change prompt colors?](#how-do-i-change-prompt-colors) +- [Why some prompt segments appear and disappear as I'm typing?]( + #why-some-prompt-segments-appear-and-disappear-as-im-typing) + +*Troubleshooting*: + +- [Question mark in prompt](#question-mark-in-prompt). +- [Icons, glyphs or powerline symbols don't render](#icons-glyphs-or-powerline-symbols-dont-render). +- [Sub-pixel imperfections around powerline symbols]( + #sub-pixel-imperfections-around-powerline-symbols). +- [Directory is difficult to see in prompt when using Rainbow style]( + #directory-is-difficult-to-see-in-prompt-when-using-rainbow-style). + +### For Powerlevel9k users + +If you've been using Powerlevel9k before, **do not remove the configuration options**. Powerlevel10k +will pick them up and provide you with the same prompt UI you are used to. See +[Powerlevel9k compatibility](#powerlevel9k-compatibility). + +*FAQ*: + +- [I'm using Powerlevel9k with Oh My Zsh. How do I migrate?]( + #im-using-powerlevel9k-with-oh-my-zsh-how-do-i-migrate) +- [What is the relationship between Powerlevel9k and Powerlevel10k?]( + #what-is-the-relationship-between-powerlevel9k-and-powerlevel10k) +- [Does Powerlevel10k always render exactly the same prompt as Powerlevel9k given the same config?]( + #does-powerlevel10k-always-render-exactly-the-same-prompt-as-powerlevel9k-given-the-same-config) + +*Troubleshooting*: [Extra or missing spaces in prompt compared to Powerlevel9k]( + #extra-or-missing-spaces-in-prompt-compared-to-powerlevel9k). + +## Fonts + +Powerlevel10k doesn't require custom fonts but can take advantage of them if they are available. +It works well with [Nerd Fonts](https://github.com/ryanoasis/nerd-fonts), +[Source Code Pro](https://github.com/adobe-fonts/source-code-pro), +[Font Awesome](https://fontawesome.com/), [Powerline](https://github.com/powerline/fonts), and even +the default system fonts. The full choice of style options is available only when using +[Nerd Fonts](https://github.com/ryanoasis/nerd-fonts). + +👇 **Recommended font**: Meslo Nerd Font patched for Powerlevel10k. 👇 + +### <a name='recommended-meslo-nerd-font-patched-for-powerlevel10k'></a><a name='font'></a>Meslo Nerd Font patched for Powerlevel10k + +Gorgeous monospace font designed by Jim Lyles for Bitstream, customized by the same for Apple, +further customized by André Berg, and finally patched by yours truly with customized scripts +originally developed by Ryan L McIntyre of Nerd Fonts. Contains all glyphs and symbols that +Powerlevel10k may need. Battle-tested in dozens of different terminals on all major operating +systems. + +*FAQ*: [How was the recommended font created?](#how-was-the-recommended-font-created) + +#### Automatic font installation + +If you are using iTerm2 or Termux, `p10k configure` can install the recommended font for you. +Simply answer `Yes` when asked whether to install *Meslo Nerd Font*. + +If you are using a different terminal, proceed with manual font installation. 👇 + +#### Manual font installation + +1. Download these four ttf files: + - [MesloLGS NF Regular.ttf]( + https://github.com/romkatv/powerlevel10k-media/raw/master/MesloLGS%20NF%20Regular.ttf) + - [MesloLGS NF Bold.ttf]( + https://github.com/romkatv/powerlevel10k-media/raw/master/MesloLGS%20NF%20Bold.ttf) + - [MesloLGS NF Italic.ttf]( + https://github.com/romkatv/powerlevel10k-media/raw/master/MesloLGS%20NF%20Italic.ttf) + - [MesloLGS NF Bold Italic.ttf]( + https://github.com/romkatv/powerlevel10k-media/raw/master/MesloLGS%20NF%20Bold%20Italic.ttf) +1. Double-click on each file and click "Install". This will make `MesloLGS NF` font available to all + applications on your system. +1. Configure your terminal to use this font: + - **iTerm2**: Type `p10k configure` and answer `Yes` when asked whether to install + *Meslo Nerd Font*. Alternatively, open *iTerm2 → Preferences → Profiles → Text* and set *Font* to + `MesloLGS NF`. + - **Apple Terminal**: Open *Terminal → Preferences → Profiles → Text*, click *Change* under *Font* + and select `MesloLGS NF` family. + - **Hyper**: Open *Hyper → Edit → Preferences* and change the value of `fontFamily` under + `module.exports.config` to `MesloLGS NF`. + - **Visual Studio Code**: Open *File → Preferences → Settings* (PC) or + *Code → Preferences → Settings* (Mac), enter `terminal.integrated.fontFamily` in the search box at + the top of *Settings* tab and set the value below to `MesloLGS NF`. + Consult [this screenshot]( + https://raw.githubusercontent.com/romkatv/powerlevel10k-media/389133fb8c9a2347929a23702ce3039aacc46c3d/visual-studio-code-font-settings.jpg) + to see how it should look like or see [this issue]( + https://github.com/romkatv/powerlevel10k/issues/671) for extra information. + - **GNOME Terminal** (the default Ubuntu terminal): Open *Terminal → Preferences* and click on the + selected profile under *Profiles*. Check *Custom font* under *Text Appearance* and select + `MesloLGS NF Regular`. + - **Konsole**: Open *Settings → Edit Current Profile → Appearance*, click *Select Font* and select + `MesloLGS NF Regular`. + - **Tilix**: Open *Tilix → Preferences* and click on the selected profile under *Profiles*. Check + *Custom font* under *Text Appearance* and select `MesloLGS NF Regular`. + - **Windows Console Host** (the old thing): Click the icon in the top left corner, then + *Properties → Font* and set *Font* to `MesloLGS NF`. + - **Windows Terminal** by Microsoft (the new thing): Open *Settings* (<kbd>Ctrl+,</kbd>), click + either on the selected profile under *Profiles* or on *Defaults*, click *Appearance* and set + *Font face* to `MesloLGS NF`. + - **Conemu**: Open *Setup → General → Fonts* and set *Main console font* to `MesloLGS NF`. + - **IntelliJ** (and other IDEs by Jet Brains): Open *IDE → Edit → Preferences → Editor → + Color Scheme → Console Font*. Select *Use console font instead of the default* and set the font + name to `MesloLGS NF`. + - **Termux**: Type `p10k configure` and answer `Yes` when asked whether to install + *Meslo Nerd Font*. + - **Blink**: Type `config`, go to *Appearance*, tap *Add a new font*, tap *Open Gallery*, select + *MesloLGS NF.css*, tap *import* and type `exit` in the home view to reload the font. + - **Tabby** (formerly **Terminus**): Open *Settings → Appearance* and set *Font* to `MesloLGS NF`. + - **Terminator**: Open *Preferences* using the context menu. Under *Profiles* select the *General* + tab (should be selected already), uncheck *Use the system fixed width font* (if not already) + and select `MesloLGS NF Regular`. Exit the Preferences dialog by clicking *Close*. + - **Guake**: Right Click on an open terminal and open *Preferences*. Under *Appearance* + tab, uncheck *Use the system fixed width font* (if not already) and select `MesloLGS NF Regular`. + Exit the Preferences dialog by clicking *Close*. + - **MobaXterm**: Open *Settings* → *Configuration* → *Terminal* → (under *Terminal look and feel*) + and change *Font* to `MesloLGS NF`. If you have *sessions*, you need to change the font in each + of them through *Settings* → right click on an individual session → *Edit Session* → *Terminal + Settings* → *Font settings*. + - **Asbrú Connection Manager**: Open *Preferences → Local Shell Options → Look and Feel*, enable + *Use these personal options* and change *Font:* under *Terminal UI* to `MesloLGS NF Regular`. + To change the font for the remote host connections, go to *Preferences → Terminal Options → + Look and Feel* and change *Font:* under *Terminal UI* to `MesloLGS NF Regular`. + - **WSLtty**: Right click on an open terminal and then on *Options*. In the *Text* section, under + *Font*, click *"Select..."* and set Font to `MesloLGS NF Regular`. + - **Yakuake**: Click *≡* → *Manage Profiles* → *New* → *Appearance*. Click *Choose* next to the + *Font* dropdown, select `MesloLGS NF` and click *OK*. Click *OK* to save the profile. Select the + new profile and click *Set as Default*. + - **Alacritty**: Create or open `~/.config/alacritty/alacritty.toml` and add the following + section to it: + ```toml + [font.normal] + family = "MesloLGS NF" + ``` + - **foot**: Create or open `~/.config/foot/foot.ini` and add the following section to it: + ```ini + font=MesloLGS NF:size=12 + ``` + - **kitty**: Create or open `~/.config/kitty/kitty.conf` and add the following line to it: + ```text + font_family MesloLGS NF + ``` + Restart kitty by closing all sessions and opening a new session. + - **puTTY**: Set *Window* → *Appearance* → *Font* to `MesloLGS NF`. Requires puTTY + version >= 0.75. + - **WezTerm**: Create or open `$HOME/.config/wezterm/wezterm.lua` and add the following: + ```lua + local wezterm = require 'wezterm'; + return { + font = wezterm.font("MesloLGS NF"), + } + ``` + If the file already exists, only add the line with the font to the existing return. + Also add the first line if it is not already present. + - **urxvt**: Create or open `~/.Xresources` and add the following line to it: + ```text + URxvt.font: xft:MesloLGS NF:size=11 + ``` + You can adjust the font size to your preference. After changing the config run + `xrdb ~/.Xresources` to reload it. The new config is applied to all new terminals. + - **xterm**: Create or open `~/.Xresources` and add the following line to it: + ```text + xterm*faceName: MesloLGS NF + ``` + After changing the config run `xrdb ~/.Xresources` to reload it. The new config is applied to + all new terminals. + - **Zed**: Open `~/.config/zed/settings.json` and set `terminal.font_family` to `"MesloLGS NF"`. + ```jsonc + { + "terminal": { + "font_family": "MesloLGS NF" + }, + // Other settings. + } + ``` + - Crostini (Linux on Chrome OS): Open + chrome-untrusted://terminal/html/nassh_preferences_editor.html, set *Text font family* to + `'MesloLGS NF'` (including the quotes) and *Custom CSS (inline text)* to the following: + ```css + @font-face { + font-family: "MesloLGS NF"; + src: url("https://raw.githubusercontent.com/romkatv/powerlevel10k-media/master/MesloLGS%20NF%20Regular.ttf"); + font-weight: normal; + font-style: normal; + } + @font-face { + font-family: "MesloLGS NF"; + src: url("https://raw.githubusercontent.com/romkatv/powerlevel10k-media/master/MesloLGS%20NF%20Bold.ttf"); + font-weight: bold; + font-style: normal; + } + @font-face { + font-family: "MesloLGS NF"; + src: url("https://raw.githubusercontent.com/romkatv/powerlevel10k-media/master/MesloLGS%20NF%20Italic.ttf"); + font-weight: normal; + font-style: italic; + } + @font-face { + font-family: "MesloLGS NF"; + src: url("https://raw.githubusercontent.com/romkatv/powerlevel10k-media/master/MesloLGS%20NF%20Bold%20Italic.ttf"); + font-weight: bold; + font-style: italic; + } + ``` + **_CAVEAT_**: If you open the normal terminal preferences these settings will be overwritten. +1. Run `p10k configure` to generate a new `~/.p10k.zsh`. The old config may work + incorrectly with the new font. + +_Using a different terminal and know how to set the font for it? Share your knowledge by sending a +PR to expand the list!_ + +## Try it in Docker + +Try Powerlevel10k in Docker. You can safely make any changes to the file system while trying out +the theme. Once you exit Zsh, the container is deleted. + +```zsh +docker run -e TERM -e COLORTERM -e LC_ALL=C.UTF-8 -it --rm alpine sh -uec ' + apk add git zsh nano vim + git clone --depth=1 https://github.com/romkatv/powerlevel10k.git ~/powerlevel10k + echo "source ~/powerlevel10k/powerlevel10k.zsh-theme" >>~/.zshrc + cd ~/powerlevel10k + exec zsh' +``` + +*Tip*: Install [the recommended font](#meslo-nerd-font-patched-for-powerlevel10k) before +running the Docker command to get access to all prompt styles. + +*Tip*: Run `p10k configure` while in Docker to try a different prompt style. + +## License + +Powerlevel10k is released under the +[MIT license](https://github.com/romkatv/powerlevel10k/blob/master/LICENSE). + +## FAQ + +- [How do I update Powerlevel10k?](#how-do-i-update-powerlevel10k) +- [How do I uninstall Powerlevel10k?](#how-do-i-uninstall-powerlevel10k) +- [How do I install Powerlevel10k on a machine without Internet access?](#how-do-i-install-powerlevel10k-on-a-machine-without-internet-access) +- [Where can I ask for help and report bugs?](#where-can-i-ask-for-help-and-report-bugs) +- [Which aspects of shell and terminal does Powerlevel10k affect?](#which-aspects-of-shell-and-terminal-does-powerlevel10k-affect) +- [I'm using Powerlevel9k with Oh My Zsh. How do I migrate?](#im-using-powerlevel9k-with-oh-my-zsh-how-do-i-migrate) +- [Is it really fast?](#is-it-really-fast) +- [How do I configure instant prompt?](#how-do-i-configure-instant-prompt) +- [How do I initialize direnv when using instant prompt?](#how-do-i-initialize-direnv-when-using-instant-prompt) +- [How do I export GPG_TTY when using instant prompt?](#how-do-i-export-gpg_tty-when-using-instant-prompt) +- [What do different symbols in Git status mean?](#what-do-different-symbols-in-git-status-mean) +- [How do I change the format of Git status?](#how-do-i-change-the-format-of-git-status) +- [Why is Git status from `$HOME/.git` not displayed in prompt?](#why-is-git-status-from-homegit-not-displayed-in-prompt) +- [Why does Git status sometimes appear grey and then gets colored after a short period of time?](#why-does-git-status-sometimes-appear-grey-and-then-gets-colored-after-a-short-period-of-time) +- [How do I add username and/or hostname to prompt?](#how-do-i-add-username-andor-hostname-to-prompt) +- [Why some prompt segments appear and disappear as I'm typing?](#why-some-prompt-segments-appear-and-disappear-as-im-typing) +- [How do I change prompt colors?](#how-do-i-change-prompt-colors) +- [Why does Powerlevel10k spawn extra processes?](#why-does-powerlevel10k-spawn-extra-processes) +- [Are there configuration options that make Powerlevel10k slow?](#are-there-configuration-options-that-make-powerlevel10k-slow) +- [Is Powerlevel10k fast to load?](#is-powerlevel10k-fast-to-load) +- [What is the relationship between Powerlevel9k and Powerlevel10k?](#what-is-the-relationship-between-powerlevel9k-and-powerlevel10k) +- [Does Powerlevel10k always render exactly the same prompt as Powerlevel9k given the same config?](#does-powerlevel10k-always-render-exactly-the-same-prompt-as-powerlevel9k-given-the-same-config) +- [What is the best prompt style in the configuration wizard?](#what-is-the-best-prompt-style-in-the-configuration-wizard) +- [How to make Powerlevel10k look like robbyrussell Oh My Zsh theme?](#how-to-make-powerlevel10k-look-like-robbyrussell-oh-my-zsh-theme) +- [Can prompts for completed commands display error status for *those* commands instead of the commands preceding them?](#can-prompts-for-completed-commands-display-error-status-for-those-commands-instead-of-the-commands-preceding-them) +- [What is the minimum supported Zsh version?](#what-is-the-minimum-supported-zsh-version) +- [How were these screenshots and animated gifs created?](#how-were-these-screenshots-and-animated-gifs-created) +- [How was the recommended font created?](#how-was-the-recommended-font-created) +- [How to package Powerlevel10k for distribution?](#how-to-package-powerlevel10k-for-distribution) + +### How do I update Powerlevel10k? + +The command to update Powerlevel10k depends on how it was installed. + +| Installation | Update command | +|-------------------------------|-------------------------------------------------------------| +| [Manual](#manual) | `git -C ~/powerlevel10k pull` | +| [Oh My Zsh](#oh-my-zsh) | `git -C ${ZSH_CUSTOM:-$HOME/.oh-my-zsh/custom}/themes/powerlevel10k pull` | +| [Prezto](#prezto) | `zprezto-update` | +| [Zim](#zim) | `zimfw update` | +| [Antigen](#antigen) | `antigen update` | +| [Antidote](#antidote) | `antidote update` | +| [Zplug](#zplug) | `zplug update` | +| [Zgen](#zgen) | `zgen update` | +| [Zplugin](#zplugin) | `zplugin update` | +| [Zinit](#zinit) | `zinit update` | +| [Zi](#zi) | `zi update` | +| [Zap](#zap) | `zap update` | +| [Homebrew](#homebrew) | `brew update && brew upgrade` | +| [Arch Linux](#arch-linux) | `yay -S --noconfirm zsh-theme-powerlevel10k-git` | +| [Alpine Linux](#alpine-linux) | `apk update && apk upgrade` | + +**IMPORTANT**: Restart Zsh after updating Powerlevel10k. [Do not use `source ~/.zshrc`]( + #weird-things-happen-after-typing-source-zshrc). + +### How do I uninstall Powerlevel10k? + +1. Remove all references to "p10k" from `~/.zshrc`. You might have this snippet at the top: + ```zsh + if [[ -r "${XDG_CACHE_HOME:-$HOME/.cache}/p10k-instant-prompt-${(%):-%n}.zsh" ]]; then + source "${XDG_CACHE_HOME:-$HOME/.cache}/p10k-instant-prompt-${(%):-%n}.zsh" + fi + ``` + And this at the bottom: + ```zsh + [[ ! -f ~/.p10k.zsh ]] || source ~/.p10k.zsh + ``` + These are added by the [configuration wizard](#configuration-wizard). Remove them. +2. Remove all references to "powerlevel10k" from `~/.zshrc`, `~/.zpreztorc` and `~/.zimrc` (some + of these files may be missing -- this is normal). These references have been added manually by + yourself when installing Powerlevel10k. Refer to the [installation instructions](#installation) + if you need a reminder. +3. Verify that all references to "p10k" and "powerlevel10k" are gone from `~/.zshrc`, `~/.zpreztorc` + and `~/.zimrc`. + ```zsh + grep -E 'p10k|powerlevel10k' ~/.zshrc ~/.zpreztorc ~/.zimrc 2>/dev/null + ``` + If this command produces output, there are still references to "p10k" or "powerlevel10k". You + need to remove them. +4. Delete Powerlevel10k configuration file. This file is created by the + [configuration wizard](#configuration-wizard) and may contain manual edits by yourself. + ```zsh + rm -f ~/.p10k.zsh + ``` +5. Delete Powerlevel10k source files. These files have been downloaded when you've installed + Powerlevel10k. The command to delete them depends on which installation method you'd chosen. + Refer to the [installation instructions](#installation) if you need a reminder. + + | Installation | Uninstall command | + |-------------------------------|------------------------------------------------------------------| + | [Manual](#manual) | `rm -rf ~/powerlevel10k` | + | [Oh My Zsh](#oh-my-zsh) | `rm -rf -- ${ZSH_CUSTOM:-$HOME/.oh-my-zsh/custom}/themes/powerlevel10k` | + | [Prezto](#prezto) | n/a | + | [Zim](#zim) | `zimfw uninstall` | + | [Antigen](#antigen) | `antigen purge romkatv/powerlevel10k` | + | [Antidote](#antidote) | `antidote purge romkatv/powerlevel10k` | + | [Zplug](#zplug) | `zplug clean` | + | [Zgen](#zgen) | `zgen reset` | + | [Zplugin](#zplugin) | `zplugin delete romkatv/powerlevel10k` | + | [Zinit](#zinit) | `zinit delete romkatv/powerlevel10k` | + | [Zi](#zi) | `zi delete romkatv/powerlevel10k` | + | [Zap](#zap) | `zsh -ic 'zap clean'` | + | [Homebrew](#homebrew) | `brew uninstall powerlevel10k` | + | [Arch Linux](#arch-linux) | `yay -R --noconfirm zsh-theme-powerlevel10k-git` | + | [Alpine Linux](#alpine-linux) | `apk del zsh-theme-powerlevel10k` | +6. Restart Zsh. [Do not use `source ~/.zshrc`](#weird-things-happen-after-typing-source-zshrc). +7. Delete Powerlevel10k cache files. + ```zsh + rm -rf -- "${XDG_CACHE_HOME:-$HOME/.cache}"/p10k-*(N) "${XDG_CACHE_HOME:-$HOME/.cache}"/gitstatus + ``` + +### How do I install Powerlevel10k on a machine without Internet access? + +1. Run this command on the machine without Internet access: + ```sh + uname -sm | tr '[A-Z]' '[a-z]' + ``` +2. Run these commands on a machine connected to the Internet after replacing the value of + `target_uname` with the output of the previous command: + ```sh + target_uname="replace this with the output of the previous command" + git clone --depth=1 https://github.com/romkatv/powerlevel10k.git ~/powerlevel10k + GITSTATUS_CACHE_DIR="$HOME"/powerlevel10k/gitstatus/usrbin ~/powerlevel10k/gitstatus/install -f -s "${target_uname% *}" -m "${target_uname#* }" + ``` +3. Copy `~/powerlevel10k` from the machine connected to the Internet to the one without Internet + access. +4. Add `source ~/powerlevel10k/powerlevel10k.zsh-theme` to `~/.zshrc` on the machine without + Internet access: + ```zsh + echo 'source ~/powerlevel10k/powerlevel10k.zsh-theme' >>~/.zshrc + ``` +5. If `~/.zshrc` on the machine without Internet access sets `ZSH_THEME`, remove that line. + ```zsh + sed -i.bak '/^ZSH_THEME=/d' ~/.zshrc + ``` + +To update, remove `~/powerlevel10k` on both machines and repeat steps 1-3. + +### Where can I ask for help and report bugs? + +The best way to ask for help and to report bugs is to [open an issue]( + https://github.com/romkatv/powerlevel10k/issues). + +[Gitter]( + https://gitter.im/powerlevel10k/community?utm_source=badge&utm_medium=badge&utm_campaign=pr-badge) +is another option. + +If all else fails, email roman.perepelitsa@gmail.com. + +If necessary, encrypt your communication with [this PGP key]( + https://api.github.com/users/romkatv/gpg_keys). + +### Which aspects of shell and terminal does Powerlevel10k affect? + +Powerlevel10k defines prompt and nothing else. It sets [prompt-related options]( + http://zsh.sourceforge.net/Doc/Release/Options.html#Prompting), and parameters `PS1` and `RPS1`. + + + +Everything within the highlighted areas on the screenshot is produced by Powerlevel10k. +Powerlevel10k has no control over the terminal content or colors outside these areas. + +Powerlevel10k does not affect: + +- Terminal window/tab title. +- Colors used by `ls`. +- The behavior of `git` command. +- The content and style of <kbd>Tab</kbd> completions. +- Command line colors (syntax highlighting, autosuggestions, etc.). +- Key bindings. +- Aliases. +- Prompt parameters other than `PS1` and `RPS1`. +- Zsh options other than those [related to prompt]( + http://zsh.sourceforge.net/Doc/Release/Options.html#Prompting). +- The set of available commands. Powerlevel10k does not install any new commands + with the only exception of `p10k`. + +### I'm using Powerlevel9k with Oh My Zsh. How do I migrate? + +1. Run this command: +```zsh +# Add powerlevel10k to the list of Oh My Zsh themes. +git clone --depth=1 https://github.com/romkatv/powerlevel10k.git $ZSH_CUSTOM/themes/powerlevel10k +# Replace ZSH_THEME="powerlevel9k/powerlevel9k" with ZSH_THEME="powerlevel10k/powerlevel10k". +sed -i.bak 's/powerlevel9k/powerlevel10k/g' ~/.zshrc +# Restart Zsh. +exec zsh +``` +2. *Optional but highly recommended:* + 1. Install [the recommended font](#meslo-nerd-font-patched-for-powerlevel10k). + 1. Type `p10k configure` and choose your favorite prompt style. + +*Related:* + - [Powerlevel9k compatibility.](#powerlevel9k-compatibility) + - [Does Powerlevel10k always render exactly the same prompt as Powerlevel9k given the same config?]( + #does-powerlevel10k-always-render-exactly-the-same-prompt-as-powerlevel9k-given-the-same-config) + - [Extra or missing spaces in prompt compared to Powerlevel9k.]( + #extra-or-missing-spaces-in-prompt-compared-to-powerlevel9k) + - [Configuration wizard.](#configuration-wizard) + +### Is it really fast? + +Yes. See [zsh-bench](https://github.com/romkatv/zsh-bench) or a direct comparison with +[Powerlevel9k](https://asciinema.org/a/NHRjK3BMePw66jtRVY2livHwZ) and +[Spaceship](https://asciinema.org/a/253094). + +### <a name='how-do-i-enable-instant-prompt'></a>How do I configure instant prompt? + +See [instant prompt](#instant-prompt) to learn about instant prompt. This section explains how you +can enable and configure it and lists caveats that you should be aware of. + +Instant prompt can be enabled either through `p10k configure` or by manually adding the following +code snippet at the top of `~/.zshrc`: + +```zsh +# Enable Powerlevel10k instant prompt. Should stay close to the top of ~/.zshrc. +# Initialization code that may require console input (password prompts, [y/n] +# confirmations, etc.) must go above this block; everything else may go below. +if [[ -r "${XDG_CACHE_HOME:-$HOME/.cache}/p10k-instant-prompt-${(%):-%n}.zsh" ]]; then + source "${XDG_CACHE_HOME:-$HOME/.cache}/p10k-instant-prompt-${(%):-%n}.zsh" +fi +``` + +It's important that you copy the lines verbatim. Don't replace `source` with something else, don't +call `zcompile`, don't redirect output, etc. + +When instant prompt is enabled, for the duration of Zsh initialization standard input is redirected +to `/dev/null` and standard output with standard error are redirected to a temporary file. Once Zsh +is fully initialized, standard file descriptors are restored and the content of the temporary file +is printed out. + +When using instant prompt, you should carefully check any output that appears on Zsh startup as it +may indicate that initialization has been altered, or perhaps even broken, by instant prompt. +Initialization code that may require console input, such as asking for a keyring password or for a +*[y/n]* confirmation, must be moved above the instant prompt preamble in `~/.zshrc`. Initialization +code that merely prints to console but never reads from it will work correctly with instant prompt, +although output that normally has colors may appear uncolored. You can either leave it be, suppress +the output, or move it above the instant prompt preamble. + +Here's an example of `~/.zshrc` that breaks when instant prompt is enabled: + +```zsh +if [[ -r "${XDG_CACHE_HOME:-$HOME/.cache}/p10k-instant-prompt-${(%):-%n}.zsh" ]]; then + source "${XDG_CACHE_HOME:-$HOME/.cache}/p10k-instant-prompt-${(%):-%n}.zsh" +fi + +keychain id_rsa --agents ssh # asks for password +chatty-script # spams to stdout even when everything is fine +# ... +``` + +Fixed version: + +```zsh +keychain id_rsa --agents ssh # moved before instant prompt + +# OK to perform console I/O before this point. +if [[ -r "${XDG_CACHE_HOME:-$HOME/.cache}/p10k-instant-prompt-${(%):-%n}.zsh" ]]; then + source "${XDG_CACHE_HOME:-$HOME/.cache}/p10k-instant-prompt-${(%):-%n}.zsh" +fi +# From this point on, until zsh is fully initialized, console input won't work and +# console output may appear uncolored. + +chatty-script >/dev/null # spam output suppressed +# ... +``` + +If `POWERLEVEL9K_INSTANT_PROMPT` is unset or set to `verbose`, Powerlevel10k will print a warning +when it detects console output during initialization to bring attention to potential issues. You can +silence this warning (without suppressing console output) with `POWERLEVEL9K_INSTANT_PROMPT=quiet`. +This is recommended if some initialization code in `~/.zshrc` prints to console and it's infeasible +to move it above the instant prompt preamble or to suppress its output. You can completely disable +instant prompt with `POWERLEVEL9K_INSTANT_PROMPT=off`. Do this if instant prompt breaks Zsh +initialization and you don't know how to fix it. + +The value of `POWERLEVEL9K_INSTANT_PROMPT` can be changed by running `p10k configure` and selecting +the appropriate option on the *Instant Prompt* screen. Alternatively, you can search for +`POWERLEVEL9K_INSTANT_PROMPT` in the existing `~/.p10k.zsh` and change its value there. + +*Note*: Instant prompt requires Zsh >= 5.4. It's OK to enable it even when using an older version of +Zsh but it won't do anything. + +*FAQ*: + +- [How do I initialize direnv when using instant prompt?]( + #how-do-i-initialize-direnv-when-using-instant-prompt) +- [How do I export GPG_TTY when using instant prompt?]( + #how-do-i-export-gpg_tty-when-using-instant-prompt) + +### How do I initialize direnv when using instant prompt? + +If you've enabled [instant prompt](#instant-prompt), you should have these lines at the top of +`~/.zshrc`: + +```zsh +if [[ -r "${XDG_CACHE_HOME:-$HOME/.cache}/p10k-instant-prompt-${(%):-%n}.zsh" ]]; then + source "${XDG_CACHE_HOME:-$HOME/.cache}/p10k-instant-prompt-${(%):-%n}.zsh" +fi +``` + +To initialize direnv you need to add one line above that block and one line below it. + +```zsh +(( ${+commands[direnv]} )) && emulate zsh -c "$(direnv export zsh)" + +if [[ -r "${XDG_CACHE_HOME:-$HOME/.cache}/p10k-instant-prompt-${(%):-%n}.zsh" ]]; then + source "${XDG_CACHE_HOME:-$HOME/.cache}/p10k-instant-prompt-${(%):-%n}.zsh" +fi + +(( ${+commands[direnv]} )) && emulate zsh -c "$(direnv hook zsh)" +``` + +*Related*: [How do I export GPG_TTY when using instant prompt?]( + #how-do-i-export-gpg_tty-when-using-instant-prompt) + +### How do I export GPG_TTY when using instant prompt? + +You can export `GPG_TTY` like this anywhere in `~/.zshrc`: + +```zsh +export GPG_TTY=$TTY +``` + +This works whether you are using [instant prompt](#instant-prompt) or not. It works even if you +aren't using powerlevel10k. As an extra bonus, it's much faster than the commonly used +`export GPG_TTY=$(tty)`. + +*Related*: [How do I initialize direnv when using instant prompt?]( + #how-do-i-initialize-direnv-when-using-instant-prompt) + +### What do different symbols in Git status mean? + +When using Lean, Classic or Rainbow style, Git status may look like this: + +```text +feature:master wip ⇣42⇡42 ⇠42⇢42 *42 merge ~42 +42 !42 ?42 +``` + +| Symbol | Meaning | Source | +| --------- | -------------------------------------------------------------------- | ------------------------------------------------------ | +| `feature` | current branch; replaced with `#tag` or `@commit` if not on a branch | `git status --ignore-submodules=dirty` | +| `master` | remote tracking branch; only shown if different from local branch | `git rev-parse --abbrev-ref --symbolic-full-name @{upstream}` | +| `wip` | the latest commit's summary contains "wip" or "WIP" | `git show --pretty=%s --no-patch HEAD` | +| `=` | up to date with the remote (neither ahead nor behind) | `git rev-list --count HEAD...@{upstream}` | +| `⇣42` | this many commits behind the remote | `git rev-list --right-only --count HEAD...@{upstream}` | +| `⇡42` | this many commits ahead of the remote | `git rev-list --left-only --count HEAD...@{upstream}` | +| `⇠42` | this many commits behind the push remote | `git rev-list --right-only --count HEAD...@{push}` | +| `⇢42` | this many commits ahead of the push remote | `git rev-list --left-only --count HEAD...@{push}` | +| `*42` | this many stashes | `git stash list` | +| `merge` | repository state | `git status --ignore-submodules=dirty` | +| `~42` | this many merge conflicts | `git status --ignore-submodules=dirty` | +| `+42` | this many staged changes | `git status --ignore-submodules=dirty` | +| `!42` | this many unstaged changes | `git status --ignore-submodules=dirty` | +| `?42` | this many untracked files | `git status --ignore-submodules=dirty` | +| `─` | the number of staged, unstaged or untracked files is unknown | `echo $POWERLEVEL9K_VCS_MAX_INDEX_SIZE_DIRTY` or `git config --get bash.showDirtyState` | + +*Related*: [How do I change the format of Git status?](#how-do-i-change-the-format-of-git-status) + +### How do I change the format of Git status? + +To change the format of Git status, open `~/.p10k.zsh`, search for `my_git_formatter` and edit its +source code. + +*Related*: [What do different symbols in Git status mean?]( + #what-do-different-symbols-in-git-status-mean) + +### Why is Git status from `$HOME/.git` not displayed in prompt? + +When using Lean, Classic or Rainbow style, `~/.p10k.zsh` contains the following parameter: + +```zsh +# Don't show Git status in prompt for repositories whose workdir matches this pattern. +# For example, if set to '~', the Git repository at $HOME/.git will be ignored. +# Multiple patterns can be combined with '|': '~(|/foo)|/bar/baz/*'. +typeset -g POWERLEVEL9K_VCS_DISABLED_WORKDIR_PATTERN='~' +``` + +To see Git status for `$HOME/.git` in prompt, open `~/.p10k.zsh` and remove +`POWERLEVEL9K_VCS_DISABLED_WORKDIR_PATTERN`. + +### Why does Git status sometimes appear grey and then gets colored after a short period of time? + +tl;dr: When Git status in prompt is greyed out, it means Powerlevel10k is currently computing +up-to-date Git status in the background. Prompt will get automatically refreshed when this +computation completes. + +When your current directory is within a Git repository, Powerlevel10k computes up-to-date Git +status after every command. If the repository is large, or the machine is slow, this computation +can take quite a bit of time. If it takes longer than 10 milliseconds (configurable via +`POWERLEVEL9K_VCS_MAX_SYNC_LATENCY_SECONDS`), Powerlevel10k displays the last known Git status in +grey and continues to compute up-to-date Git status in the background. When the computation +completes, Powerlevel10k refreshes prompt with new information, this time with colored Git status. + +When using *Rainbow* style, Git status is displayed as black on grey while it's still being +computed. Depending on the terminal color palette, this may be difficult to read. In this case you +might want to change the background color to something lighter for more contrast. To do that, open +`~/.p10k.zsh`, search for `POWERLEVEL9K_VCS_LOADING_BACKGROUND`, uncomment it if it's commented out, +and change the value. + +```zsh +typeset -g POWERLEVEL9K_VCS_LOADING_BACKGROUND=244 +``` + +Type `source ~/.p10k.zsh` to apply your changes to the current Zsh session. + +*Related*: [How do I change prompt colors?](#how-do-i-change-prompt-colors) + +### How do I add username and/or hostname to prompt? + +When using Lean, Classic or Rainbow style, prompt shows `username@hostname` when you are logged in +as root or via SSH. There is little value in showing `username` or `hostname` when you are logged in +to your local machine as a normal user. So the absence of `username@hostname` in your prompt is an +indication that you are working locally and that you aren't root. You can change it, however. + +Open `~/.p10k.zsh`. Close to the top you can see the most important parameters that define which +segments are shown in your prompt. All generally useful prompt segments are listed in there. Some of +them are enabled, others are commented out. One of them is of interest to you. + +```zsh +typeset -g POWERLEVEL9K_RIGHT_PROMPT_ELEMENTS=( + ... + context # user@hostname + ... +) +``` + +Search for `context` to find the section in the config that lists parameters specific to this prompt +segment. You should see the following lines: + +```zsh +# Don't show context unless running with privileges or in SSH. +# Tip: Remove the next line to always show context. +typeset -g POWERLEVEL9K_CONTEXT_{DEFAULT,SUDO}_{CONTENT,VISUAL_IDENTIFIER}_EXPANSION= +``` + +If you follow the tip and remove (or comment out) the last line, you'll always see +`username@hostname` in prompt. You can change the format to just `username`, or change the color, by +adjusting the values of parameters nearby. There are plenty of comments to help you navigate. + +You can also move `context` to a different position in `POWERLEVEL9K_RIGHT_PROMPT_ELEMENTS` or even +to `POWERLEVEL9K_LEFT_PROMPT_ELEMENTS`. + +### Why some prompt segments appear and disappear as I'm typing? + +Prompt segments can be configured to be shown only when the current command you are typing invokes +a relevant tool. + +```zsh +# Show prompt segment "kubecontext" only when the command you are typing invokes +# invokes kubectl, helm, or kubens. +typeset -g POWERLEVEL9K_KUBECONTEXT_SHOW_ON_COMMAND='kubectl|helm|kubens' +``` + +Configs created by `p10k configure` may contain parameters of this kind. To customize when different +prompt segments are shown, open `~/.p10k.zsh`, search for `SHOW_ON_COMMAND` and either remove these +parameters or change their values. + +You can also define a function in `~/.zshrc` to toggle the display of a prompt segment between +*always* and *on command*. This is similar to `kubeon`/`kubeoff` from +[kube-ps1](https://github.com/jonmosco/kube-ps1). + +```zsh +function kube-toggle() { + if (( ${+POWERLEVEL9K_KUBECONTEXT_SHOW_ON_COMMAND} )); then + unset POWERLEVEL9K_KUBECONTEXT_SHOW_ON_COMMAND + else + POWERLEVEL9K_KUBECONTEXT_SHOW_ON_COMMAND='kubectl|helm|kubens' + fi + p10k reload + if zle; then + zle push-input + zle accept-line + fi +} +``` + +Invoke this function by typing `kube-toggle`. You can also bind it to a key by adding two more lines +to `~/.zshrc`: + +```zsh +zle -N kube-toggle +bindkey '^]' kube-toggle # ctrl-] to toggle kubecontext in powerlevel10k prompt +``` + +### How do I change prompt colors? + +You can either [change the color palette used by your terminal]( + #change-the-color-palette-used-by-your-terminal) or +[set colors through Powerlevel10k configuration parameters]( + #set-colors-through-Powerlevel10k-configuration-parameters). + +#### Change the color palette used by your terminal + +How exactly you change the terminal color palette (a.k.a. color scheme, or theme) depends on the +kind of terminal you are using. Look around in terminal's settings/preferences or consult +documentation. + +When you change the terminal color palette, it usually affects only the first 16 colors, numbered +from 0 to 15. In order to see any effect on Powerlevel10k prompt, you need to use prompt style that +utilizes these low-numbered colors. Type `p10k configure` and select *Rainbow*, *Lean* → *8 colors* +or *Pure* → *Original*. Other styles use higher-numbered colors, so they look the same in any +terminal color palette. + +#### Set colors through Powerlevel10k configuration parameters + +Open `~/.p10k.zsh`, search for "color", "foreground" and "background" and change values of +appropriate parameters. For example, here's how you can set the foreground of `time` prompt segment +to bright red: + +```zsh +typeset -g POWERLEVEL9K_TIME_FOREGROUND=160 +``` + +Colors are specified using numbers from 0 to 255. Colors from 0 to 15 look differently in different +terminals. Many terminals also support customization of these colors through color palettes +(a.k.a. color schemes, or themes). Colors from 16 to 255 always look the same. + +Type `source ~/.p10k.zsh` to apply your changes to the current Zsh session. + +To see how different numbered colors look in your terminal, run the following command: + +```zsh +for i in {0..255}; do print -Pn "%K{$i} %k%F{$i}${(l:3::0:)i}%f " ${${(M)$((i%6)):#3}:+$'\n'}; done +``` + +If your terminal supports truecolor, you can use 24-bit colors in the `#RRGGBB` format in addition +to the numbered colors. + +```zsh +typeset -g POWERLEVEL9K_TIME_FOREGROUND='#FF0000' +``` + +*Related:* + - [Directory is difficult to see in prompt when using Rainbow style.]( + #directory-is-difficult-to-see-in-prompt-when-using-rainbow-style) + - [Incorrect foreground color in VSCode Terminal.](#incorrect-foreground-color-in-vscode-terminal) + +By default, VSCode Terminal may arbitrarily replace the foreground color of your choice with a +different color. This behavior can be +[turned off](https://code.visualstudio.com/docs/terminal/appearance#_minimum-contrast-ratio) in +VSCode settings. + +### Why does Powerlevel10k spawn extra processes? + +Powerlevel10k uses [gitstatus](https://github.com/romkatv/gitstatus) as the backend behind `vcs` +prompt; gitstatus spawns `gitstatusd` and `zsh`. See +[gitstatus](https://github.com/romkatv/gitstatus) for details. Powerlevel10k may also spawn `zsh` +to perform computation without blocking prompt. To avoid security hazard, these background processes +aren't shared by different interactive shells. They terminate automatically when the parent `zsh` +process terminates or runs `exec(3)`. + +### Are there configuration options that make Powerlevel10k slow? + +No, Powerlevel10k is always fast, with any configuration you throw at it. If you have noticeable +prompt latency when using Powerlevel10k, please +[open an issue](https://github.com/romkatv/powerlevel10k/issues). + +### Is Powerlevel10k fast to load? + +Yes. See [zsh-bench](https://github.com/romkatv/zsh-bench). + +### What is the relationship between Powerlevel9k and Powerlevel10k? + +Powerlevel10k was forked from Powerlevel9k in March 2019 after a week-long discussion in +[powerlevel9k#1170](https://github.com/Powerlevel9k/powerlevel9k/issues/1170). Powerlevel9k was +already a mature project with a large user base and a release cycle measured in months. Powerlevel10k +was spun off to iterate on performance improvements and new features at much higher pace. + +Powerlevel9k and Powerlevel10k are independent projects. When using one, you shouldn't install the +other. Issues should be filed against the project that you actually use. There are no individuals +that have commit rights in both repositories. All bug fixes and new features committed to +Powerlevel9k repository get ported to Powerlevel10k. + +Over time, virtually all code in Powerlevel10k has been rewritten. There is currently no meaningful +overlap between the implementations of Powerlevel9k and Powerlevel10k. + +Powerlevel10k is committed to maintaining backward compatibility with all configs indefinitely. This +commitment covers all configuration parameters recognized by Powerlevel9k (see +[Powerlevel9k compatibility](#powerlevel9k-compatibility)) and additional parameters that only +Powerlevel10k understands. Names of all parameters in Powerlevel10k start with `POWERLEVEL9K_` for +consistency. + +### Does Powerlevel10k always render exactly the same prompt as Powerlevel9k given the same config? + +Almost. There are a few differences. + +- By default only `git` vcs backend is enabled in Powerlevel10k. If you need `svn` and `hg`, add + them to `POWERLEVEL9K_VCS_BACKENDS`. These backends aren't yet optimized in Powerlevel10k, so + enabling them will make prompt *very slow*. +- Powerlevel10k doesn't support `POWERLEVEL9K_VCS_SHOW_SUBMODULE_DIRTY=true`. +- Powerlevel10k strives to be bug-compatible with Powerlevel9k but not when it comes to egregious + bugs. If you accidentally rely on these bugs, your prompt will differ between Powerlevel9k and + Powerlevel10k. Some examples: + - Powerlevel9k ignores some options that are set after the theme is sourced while Powerlevel10k + respects all options. If you see different icons in Powerlevel9k and Powerlevel10k, you've + probably defined `POWERLEVEL9K_MODE` before sourcing the theme. This parameter gets ignored + by Powerlevel9k but honored by Powerlevel10k. If you want your prompt to look in Powerlevel10k + the same as in Powerlevel9k, remove `POWERLEVEL9K_MODE`. + - Powerlevel9k doesn't respect `ZLE_RPROMPT_INDENT`. As a result, right prompt in Powerlevel10k + can have an extra space at the end compared to Powerlevel9k. Set `ZLE_RPROMPT_INDENT=0` if you + don't want that space. More details in + [troubleshooting](#extra-space-without-background-on-the-right-side-of-right-prompt). + - Powerlevel9k has inconsistent spacing around icons. This was fixed in Powerlevel10k. Set + `POWERLEVEL9K_LEGACY_ICON_SPACING=true` to get the same spacing as in Powerlevel9k. More + details in [troubleshooting](#extra-or-missing-spaces-around-icons). + - There are dozens more bugs in Powerlevel9k that don't exist in Powerlevel10k. + +If you notice any other changes in prompt appearance when switching from Powerlevel9k to +Powerlevel10k, please [open an issue](https://github.com/romkatv/powerlevel10k/issues). + +### What is the best prompt style in the configuration wizard? + +There are as many opinions on what constitutes the best prompt as there are people. It mostly comes +down to personal preference. There are, however, a few hidden implications of different choices. + +Pure style is an exact replication of [Pure Zsh theme](https://github.com/sindresorhus/pure). It +exists to ease the migration for users of this theme. Unless you are one of them, choose Lean +style over Pure. + +If you want to confine prompt colors to the selected terminal color palette (say, *Solarized Dark*), +use *Rainbow*, *Lean* → *8 colors* or *Pure* → *Original*. Other styles use fixed colors and thus +look the same in any terminal color palette. + +All styles except Pure have an option to use *ASCII* charset. Prompt will look less pretty but will +render correctly with all fonts and in all locales. + +If you enable transient prompt, take advantage of two-line prompt. You'll get the benefit of +extra space for typing commands without the usual drawback of reduced scrollback density. Having +all commands start from the same offset is also nice. + +Similarly, if you enable transient prompt, sparse prompt (with an empty line before prompt) is a +great choice. + +If you are using vi keymap, choose prompt with `prompt_char` in it (shown as green `❯` in the +wizard). This symbol changes depending on vi mode: `❯`, `❮`, `V`, `▶` for insert, command, visual +and replace mode respectively. When a command fails, the symbol turns red. *Lean* style always has +`prompt_char` in it. *Rainbow* and *Classic* styles have it only in the two-line configuration +without left frame. + +If you value horizontal space or prefer minimalist aesthetics: + +- Use a monospace font, such as [the recommended font](#meslo-nerd-font-patched-for-powerlevel10k). + Non-monospace fonts require extra space after icons that are larger than a single column. +- Use Lean style. Compared to Classic and Rainbow, it saves two characters per prompt segment. +- Disable *current time* and *frame*. +- Use *few icons*. The extra icons enabled by the *many icons* option primarily serve decorative + function. Informative icons, such as background job indicator, will be shown either way. + +*Note*: You can run configuration wizard as many times as you like. Type `p10k configure` to try new +prompt style. + +### How to make Powerlevel10k look like robbyrussell Oh My Zsh theme? + +Use [this config]( + https://github.com/romkatv/powerlevel10k/blob/master/config/p10k-robbyrussell.zsh). + +You can either download it, save as `~/.p10k.zsh` and `source ~/.p10k.zsh` from `~/.zshrc`, or +source `p10k-robbyrussell.zsh` directly from your cloned `powerlevel10k` repository. + +### Can prompts for completed commands display error status for *those* commands instead of the commands preceding them? + +No. When you hit *ENTER* and the command you've typed starts running, its error status isn't yet +known, so it cannot be shown in prompt. When the command completes, the error status gets known but +it's no longer possible to update prompt for *that* command. This is why the error status for every +command is reflected in the *next* prompt. + +For details, see [this post on /r/zsh]( +https://www.reddit.com/r/zsh/comments/eg49ff/powerlevel10k_prompt_history_exit_code_colors/fc5huku). + +### What is the minimum supported Zsh version? + +Zsh 5.3 or newer should work. Fast startup requires Zsh >= 5.4. + +### How were these screenshots and animated gifs created? + +All screenshots and animated gifs were recorded in GNOME Terminal with +[the recommended font](#meslo-nerd-font-patched-for-powerlevel10k) and Tango Dark color palette with +custom background color (`#171A1B` instead of `#2E3436` -- twice as dark). + + + +Syntax highlighting, where present, was provided by [zsh-syntax-highlighting]( + https://github.com/zsh-users/zsh-syntax-highlighting). + +### How was the recommended font created? + +[The recommended font](#meslo-nerd-font-patched-for-powerlevel10k) is the product of many +individuals. Its origin is *Bitstream Vera Sans Mono*, which has given birth to *Menlo*, which in +turn has spawned *Meslo*. Finally, extra glyphs have been added to *Meslo* with scripts forked +from Nerd Fonts. The final font is released under the terms of +[Apache License]( + https://raw.githubusercontent.com/romkatv/powerlevel10k-media/master/MesloLGS%20NF%20License.txt). + +MesloLGS NF font can be recreated with the following command (requires `git` and `docker`): + +```zsh +git clone --depth=1 https://github.com/romkatv/nerd-fonts.git +cd nerd-fonts +./build 'Meslo/S/*' +``` + +If everything goes well, four `ttf` files will appear in `./out`. + +### How to package Powerlevel10k for distribution? + +It's currently neither easy nor recommended to package and distribute Powerlevel10k. There are no +instructions you can follow that would allow you to easily update your package when new versions of +Powerlevel10k are released. This may change in the future but not soon. + +## Troubleshooting + +- [`[oh-my-zsh] theme 'powerlevel10k/powerlevel10k' not found`](#oh-my-zsh-theme-powerlevel10kpowerlevel10k-not-found) +- [Question mark in prompt](#question-mark-in-prompt) +- [Icons, glyphs or powerline symbols don't render](#icons-glyphs-or-powerline-symbols-dont-render) +- [Sub-pixel imperfections around powerline symbols](#sub-pixel-imperfections-around-powerline-symbols) +- [Error: character not in range](#error-character-not-in-range) +- [Cursor is in the wrong place](#cursor-is-in-the-wrong-place) +- [Prompt wrapping around in a weird way](#prompt-wrapping-around-in-a-weird-way) +- [Right prompt is in the wrong place](#right-prompt-is-in-the-wrong-place) +- [Configuration wizard runs automatically every time Zsh is started](#configuration-wizard-runs-automatically-every-time-zsh-is-started) +- [Some prompt styles are missing from the configuration wizard](#some-prompt-styles-are-missing-from-the-configuration-wizard) +- [Cannot install the recommended font](#cannot-install-the-recommended-font) +- [Extra or missing spaces in prompt compared to Powerlevel9k](#extra-or-missing-spaces-in-prompt-compared-to-powerlevel9k) + - [Extra space without background on the right side of right prompt](#extra-space-without-background-on-the-right-side-of-right-prompt) + - [Extra or missing spaces around icons](#extra-or-missing-spaces-around-icons) +- [Weird things happen after typing `source ~/.zshrc`](#weird-things-happen-after-typing-source-zshrc) +- [Transient prompt stops working after some time](#transient-prompt-stops-working-after-some-time) +- [Cannot make Powerlevel10k work with my plugin manager](#cannot-make-powerlevel10k-work-with-my-plugin-manager) +- [Directory is difficult to see in prompt when using Rainbow style](#directory-is-difficult-to-see-in-prompt-when-using-rainbow-style) +- [Incorrect foreground color in VSCode Terminal.](#incorrect-foreground-color-in-vscode-terminal) +- [Horrific mess when resizing terminal window](#horrific-mess-when-resizing-terminal-window) +- [Icons cut off in Konsole](#icons-cut-off-in-konsole) +- [Arch Linux logo has a dot in the bottom right corner](#arch-linux-logo-has-a-dot-in-the-bottom-right-corner) +- [Incorrect git status in prompt](#incorrect-git-status-in-prompt) + +### `[oh-my-zsh] theme 'powerlevel10k/powerlevel10k' not found` + +When opening a terminal, or starting zsh manually, you may encounter this error message: + +```text +[oh-my-zsh] theme 'powerlevel10k/powerlevel10k' not found +``` + +1. First, run `typeset -p P9K_VERSION` to check whether Powerlevel10k has been loaded. + - If `typeset -p P9K_VERSION` succeeds and prints something like `typeset P9K_VERSION=1.19.14` + (the version could be different), remove the following line from `~/.zshrc`: + ```zsh + ZSH_THEME="powerlevel10k/powerlevel10k" + ``` + - If `typeset -p P9K_VERSION` fails with the error `typeset: no such variable: P9K_VERSION`, run + the following command: + ```zsh + git clone --depth=1 https://github.com/romkatv/powerlevel10k.git ${ZSH_CUSTOM:-$HOME/.oh-my-zsh/custom}/themes/powerlevel10k + ``` +2. Restart Zsh with `exec zsh`. + +### Question mark in prompt + +If it looks like a regular `?`, that's normal. It means you have untracked files in the current Git +repository. Type `git status` to see these files. You can change this symbol or disable the display +of untracked files altogether. Search for `untracked files` in `~/.p10k.zsh`. + +*FAQ*: [What do different symbols in Git status mean?]( + #what-do-different-symbols-in-git-status-mean) + +You can also get a weird-looking question mark in your prompt if your terminal's font is missing +some glyphs. See [icons, glyphs or powerline symbols don't render]( + #icons-glyphs-or-powerline-symbols-dont-render). + +### Icons, glyphs or powerline symbols don't render + +Restart your terminal, [install the recommended font](#meslo-nerd-font-patched-for-powerlevel10k) +and run `p10k configure`. + +### Sub-pixel imperfections around powerline symbols + + + +There are three imperfections on the screenshot. From left to right: + +1. A thin blue line (a sub-pixel gap) between the content of a prompt segment and the following +powerline connection. +1. Incorrect alignment of a powerline connection and the following prompt segment. The connection +appears shifted to the right. +1. A thin red line below a powerline connection. The connection appears shifted up. + +Zsh themes don't have down-to-pixel control over the terminal content. Everything you see on the +screen is made of monospace characters. A white powerline prompt segment is made of text on white +background followed by U+E0B0 (a right-pointing triangle). + + + +If Powerlevel10k prompt has imperfections around powerline symbols, you'll see exactly the same +imperfections with all powerline themes (Agnoster, Powerlevel9k, Powerline, etc.) + +There are several things you can try to deal with these imperfections: + +- Try [the recommended font](#meslo-nerd-font-patched-for-powerlevel10k). If you are already using + it, switching to another font may help but is unlikely. +- Change terminal font size one point up or down. For example, in iTerm2 powerline prompt looks + perfect at font sizes 11 and 13 but breaks down at 12. +- Enable builtin powerline glyphs in terminal settings if your terminal supports it (iTerm2 does). +- Change font hinting and/or anti-aliasing mode in the terminal settings. +- Shift all text one pixel up/down/left/right if your terminal has an option to do so. +- Try a different terminal. + +A more radical solution is to switch to prompt style without background. Type `p10k configure` and +select *Lean*. This style has a modern lightweight look. As a bonus, it doesn't suffer from +rendering imperfections that afflict powerline-style prompt. + +### Error: character not in range + +Type `echo '\u276F'`. If you get an error saying "zsh: character not in range", your locale +doesn't support UTF-8. You need to fix it. If you are running Zsh over SSH, see +[this](https://github.com/romkatv/powerlevel10k/issues/153#issuecomment-518347833). If you are +running Zsh locally, Google "set UTF-8 locale in *your OS*". + +### Cursor is in the wrong place + +Type `echo '\u276F'`. If you get an error saying "zsh: character not in range", see the +[previous section](#zsh-character-not-in-range). + +If the `echo` command prints `❯` but the cursor is still in the wrong place, install +[the recommended font](#meslo-nerd-font-patched-for-powerlevel10k) and run +`p10k configure`. + +If this doesn't help, add `unset ZLE_RPROMPT_INDENT` at the bottom of `~/.zshrc`. + +Still having issues? Run the following command to diagnose the problem: + +```zsh +() { + emulate -L zsh + setopt err_return no_unset + local text + print -rl -- 'Select a part of your prompt from the terminal window and paste it below.' '' + read -r '?Prompt: ' text + local -i len=${(m)#text} + local frame="+-${(pl.$len..-.):-}-+" + print -lr -- $frame "| $text |" $frame +} +``` + +#### If the prompt line aligns with the frame + +```text ++------------------------------+ +| romka@adam ✓ ~/powerlevel10k | ++------------------------------+ +``` + +If the output of the command is aligned for every part of your prompt (left and right), this +indicates a bug in the theme or your config. Use this command to diagnose it: + +```zsh +print -rl -- ${(eq+)PROMPT} ${(eq+)RPROMPT} +``` + +Look for `%{...%}` and backslash escapes in the output. If there are any, they are the likely +culprits. Open an issue if you get stuck. + +#### If the prompt line is longer than the frame + +```text ++-----------------------------+ +| romka@adam ✓ ~/powerlevel10k | ++-----------------------------+ +``` + +This is usually caused by a terminal bug or misconfiguration that makes it print ambiguous-width +characters as double-width instead of single width. For example, +[this issue](https://github.com/romkatv/powerlevel10k/issues/165). + +#### If the prompt line is shorter than the frame and is mangled + +```text ++------------------------------+ +| romka@adam ✓~/powerlevel10k | ++------------------------------+ +``` + +Note that this prompt is different from the original as it's missing a space after the check mark. + +This can be caused by a low-level bug in macOS. See +[this issue](https://github.com/romkatv/powerlevel10k/issues/241). + +This can also happen if prompt contains glyphs designated as "wide" in the Unicode standard and your +terminal incorrectly displays them as non-wide. Terminals suffering from this limitation include +Konsole, Hyper and the integrated VSCode Terminal. The solution is to use a different terminal or +remove all wide glyphs from prompt. + +#### If the prompt line is shorter than the frame and is not mangled + +```text ++--------------------------------+ +| romka@adam ✓ ~/powerlevel10k | ++--------------------------------+ +``` + +This can be caused by misconfigured locale. See +[this issue](https://github.com/romkatv/powerlevel10k/issues/251). + +### Prompt wrapping around in a weird way + +See [cursor is in the wrong place](#cursor-is-in-the-wrong-place). + +### Right prompt is in the wrong place + +See [cursor is in the wrong place](#cursor-is-in-the-wrong-place). + +### Configuration wizard runs automatically every time Zsh is started + +When Powerlevel10k starts, it automatically runs `p10k configure` if no `POWERLEVEL9K_*` +parameters are defined. Based on your prompt style choices, the configuration wizard creates +`~/.p10k.zsh` with a bunch of `POWERLEVEL9K_*` parameters in it and adds a line to `~/.zshrc` to +source this file. The next time you start Zsh, the configuration wizard shouldn't run automatically. +If it does, this means the evaluation of `~/.zshrc` terminates prematurely before it reaches the +line that sources `~/.p10k.zsh`. This most often happens due to syntax errors in `~/.zshrc`. These +errors get hidden by the configuration wizard screen, so you don't notice them. When you exit +configuration wizard, look for error messages. You can also use +`POWERLEVEL9K_DISABLE_CONFIGURATION_WIZARD=true zsh` to start Zsh without automatically running the +configuration wizard. Once you can see the errors, fix `~/.zshrc` to get rid of them. + +### Some prompt styles are missing from the configuration wizard + +If Zsh version is below 5.7.1 or `COLORTERM` environment variable is neither `24bit` nor +`truecolor`, configuration wizard won't offer Pure style with Snazzy color scheme. *Fix*: Install +Zsh >= 5.7.1 and use a terminal with truecolor support. Verify with `print -P '%F{#ff0000}red%f'`. + +If the terminal can display fewer than 256 colors, configuration wizard preselects Lean style with +8 colors. All other styles require at least 256 colors. *Fix*: Use a terminal with 256 color support +and make sure that `TERM` environment variable is set correctly. Verify with +`print $terminfo[colors]`. + +If there is no UTF-8 locale on the system, configuration wizard won't offer prompt styles that use +Unicode characters. *Fix*: Install a UTF-8 locale. Verify with `locale -a`. + +Another case in which configuration wizard may not offer Unicode prompt styles is when the +`MULTIBYTE` shell option is disabled. *Fix*: Enable the `MULTIBYTE` option, or rather don't disable +it (this option is enabled in Zsh by default). Verify with `print -r -- ${options[MULTIBYTE]}`. + +When `MULTIBYTE` is enabled and a UTF-8 locale is available, the first few questions asked by the +configuration wizard assess capabilities of the terminal font. If your answers indicate that some +glyphs don't render correctly, configuration wizard won't offer prompt styles that use them. *Fix*: +Restart your terminal and install +[the recommended font](#meslo-nerd-font-patched-for-powerlevel10k). Verify by running +`p10k configure` and checking that all glyphs render correctly. + +### Cannot install the recommended font + +Once you download [the recommended font](#meslo-nerd-font-patched-for-powerlevel10k), +you can install it just like any other font. Google "how to install fonts on *your OS*". + +### Extra or missing spaces in prompt compared to Powerlevel9k + +tl;dr: Add `ZLE_RPROMPT_INDENT=0` and `POWERLEVEL9K_LEGACY_ICON_SPACING=true` to `~/.zshrc` to get +the same prompt spacing as in Powerlevel9k. + +When using Powerlevel10k with a Powerlevel9k config, you might get additional spaces in prompt here +and there. These come in two flavors. + +#### Extra space without background on the right side of right prompt + +tl;dr: Add `ZLE_RPROMPT_INDENT=0` to `~/.zshrc` to get rid of that space. + +From [Zsh documentation]( + http://zsh.sourceforge.net/Doc/Release/Parameters.html#index-ZLE_005fRPROMPT_005fINDENT): + +> `ZLE_RPROMPT_INDENT <S>` +> +> If set, used to give the indentation between the right hand side of the right prompt in the line +> editor as given by `RPS1` or `RPROMPT` and the right hand side of the screen. If not set, the +> value `1` is used. +> +> Typically this will be used to set the value to `0` so that the prompt appears flush with the +> right hand side of the screen. + +Powerlevel10k respects this parameter. If you set `ZLE_RPROMPT_INDENT=1` (or leave it unset, which +is the same thing as setting it to `1`), you'll get an empty space to the right of right prompt. If +you set `ZLE_RPROMPT_INDENT=0`, your prompt will go to the edge of the terminal. This is how it +works in every theme except Powerlevel9k. + + + +Powerlevel9k issue: [powerlevel9k#1292](https://github.com/Powerlevel9k/powerlevel9k/issues/1292). +It's been fixed in the development branch of Powerlevel9k but the fix hasn't yet made it to +`master`. + +Add `ZLE_RPROMPT_INDENT=0` to `~/.zshrc` to get the same spacing on the right edge of prompt as in +Powerlevel9k. + +*Note:* Several versions of Zsh have bugs that get triggered when you set `ZLE_RPROMPT_INDENT=0`. +Powerlevel10k can work around these bugs when using powerline prompt style. If you notice visual +artifacts in prompt, or wrong cursor position, try removing `ZLE_RPROMPT_INDENT` from `~/.zshrc`. + +#### Extra or missing spaces around icons + +tl;dr: Add `POWERLEVEL9K_LEGACY_ICON_SPACING=true` to `~/.zshrc` to get the same spacing around +icons as in Powerlevel9k. + +Spacing around icons in Powerlevel9k is inconsistent. + + + +This inconsistency is a constant source of annoyance, so it was fixed in Powerlevel10k. You can add +`POWERLEVEL9K_LEGACY_ICON_SPACING=true` to `~/.zshrc` to get the same spacing around icons as in +Powerlevel9k. + +*Note:* It's not a good idea to define `POWERLEVEL9K_LEGACY_ICON_SPACING` when using +`p10k configure`. + +### Weird things happen after typing `source ~/.zshrc` + +It's almost always a bad idea to run `source ~/.zshrc`, whether you are using Powerlevel10k or not. +This command may result in random errors, misbehaving code and progressive slowdown of Zsh. + +If you've made changes to `~/.zshrc` or to files sourced by it, restart Zsh to apply them. The most +reliable way to do this is to type `exit` and then start a new Zsh session. You can also use +`exec zsh`. While not exactly equivalent to complete Zsh restart, this command is much more reliable +than `source ~/.zshrc`. + +### Transient prompt stops working after some time + +See [weird things happen after typing `source ~/.zshrc`]( + #weird-things-happen-after-typing-source-zshrc). + +### Cannot make Powerlevel10k work with my plugin manager + +If the [installation instructions](#installation) didn't work for you, try disabling your current +theme (so that you end up with no theme) and then installing Powerlevel10k manually. + +1. Disable the current theme in your framework / plugin manager. + +- **oh-my-zsh:** Open `~/.zshrc` and remove the line that sets `ZSH_THEME`. It might look like this: + `ZSH_THEME="powerlevel9k/powerlevel9k"`. +- **zplug:** Open `~/.zshrc` and remove the `zplug` command that refers to your current theme. For + example, if you are currently using Powerlevel9k, look for + `zplug bhilburn/powerlevel9k, use:powerlevel9k.zsh-theme`. +- **prezto:** Open `~/.zpreztorc` and put `zstyle :prezto:module:prompt theme off` in it. Remove + any other command that sets `theme` such as `zstyle :prezto:module:prompt theme powerlevel9k`. +- **antigen:** Open `~/.zshrc` and remove the line that sets `antigen theme`. It might look like + this: `antigen theme powerlevel9k/powerlevel9k`. + +2. Install Powerlevel10k manually. + +```zsh +git clone --depth=1 https://github.com/romkatv/powerlevel10k.git ~/powerlevel10k +echo 'source ~/powerlevel10k/powerlevel10k.zsh-theme' >>~/.zshrc +``` + +This method of installation won't make anything slower or otherwise sub-par. + +### Directory is difficult to see in prompt when using Rainbow style + +In Rainbow style the current working directory is shown with bright white text on blue background. +The white is fixed and always looks the same but the appearance of "blue" is defined by your +terminal color palette. If it's very light, it may be difficult to see white text on it. + +There are several ways to fix this. + +- Type `p10k configure` and choose a more readable prompt style. +- [Change terminal color palette](#change-the-color-palette-used-by-your-terminal). Try Tango Dark + or Solarized Dark, or change just the "blue" color. +- [Change directory background and/or foreground color](#set-colors-through-Powerlevel10k-configuration-parameters). + The parameters you are looking for are called `POWERLEVEL9K_DIR_BACKGROUND`, + `POWERLEVEL9K_DIR_FOREGROUND`, `POWERLEVEL9K_DIR_SHORTENED_FOREGROUND`, + `POWERLEVEL9K_DIR_ANCHOR_FOREGROUND` and `POWERLEVEL9K_DIR_ANCHOR_BOLD`. You can find them in + `~/.p10k.zsh`. + +*Related*: [Incorrect foreground color in VSCode Terminal.](#incorrect-foreground-color-in-vscode-terminal) + +### Incorrect foreground color in VSCode Terminal + +By default, VSCode Terminal may arbitrarily replace the foreground color of your choice with a +different color. This behavior can be +[turned off](https://code.visualstudio.com/docs/terminal/appearance#_minimum-contrast-ratio) in +VSCode settings. + +### Horrific mess when resizing terminal window + +When you resize a terminal window horizontally back and forth a few times, you might see this ugly +picture. + + + +tl;dr: This issue arises when a terminal reflows Zsh prompt upon resizing. It isn't specific to +Powerlevel10k. See [mitigation](#mitigation). + +*Note: This section [used to say]( + https://github.com/romkatv/powerlevel10k/blob/dce00cdb5daaa8a519df234a7012ba3257b644d4/README.md#horrific-mess-when-resizing-terminal-window) +that the problem is caused by a bug in Zsh. While it's true that it's possible to avoid the problem +in many circumstances by modifying Zsh, it cannot be completely resolved this way. Thus it's unfair +to pin the blame on Zsh.* + +#### The anatomy of the problem + +The issue is manifested when the vertical distance between the start of the current prompt and the +cursor (henceforth `VD`) changes when the terminal window is resized. + +When a terminal window gets shrunk horizontally, there are two ways for a terminal to handle long +lines that no longer fit: *reflow* or *truncate*. + +Terminal content before shrinking: + + + +Terminal reflows text when shrinking: + + + +Terminal truncates text when shrinking: + + + +Reflowing strategy can change the height of terminal content. If such content happens to be between +the start of the current prompt and the cursor, Zsh will print prompt on the wrong line. Truncation +strategy never changes the height of terminal content, so it doesn't trigger this issue. + +Let's see how the issue plays out in slow motion. We'll start by launching `zsh -f` and pasting +the following code: + +```zsh +function pause() { read -s } +functions -M pause 0 + +reset +print -l {1..3} +setopt prompt_subst +PROMPT=$'${$((pause()))+}left>${(pl.$((COLUMNS-12))..-.)}<right\n> ' +``` + +When `PROMPT` gets expanded, it calls `pause` to let us observe the state of the terminal. Here's +the initial state: + + + +Zsh keeps track of the cursor position relative to the start of the current prompt. In this case it +knows that the cursor is one line below. When we shrink the terminal window, it looks like this: + + + +At this point the terminal sends `SIGWINCH` to Zsh to notify it about changes in the terminal +dimensions. Note that this signal is sent *after* the content of the terminal has been reflown. + +When Zsh receives `SIGWINCH`, it attempts to erase the current prompt and print it anew. It goes to +the position where it *thinks* the current prompt is -- one line above the cursor (!) -- erases all +terminal content that follows and prints reexpanded prompt there. However, after resizing prompt is +no longer one line above the cursor. It's two lines above! Zsh ends up printing new prompt one line +too low. + + + +In this case we ended up with unwanted junk content because `VD` has *increased*. When you make +terminal window wider, `VD` can also *decrease*, which would result in the new prompt being printed +higher than intended, potentially erasing useful content in the process. + +Here are a few more examples where shrinking terminal window increased `VD`. + +- Simple one-line left prompt with right prompt. No `prompt_subst`. Note that the cursor is below + the prompt line (hit *ESC-ENTER* to get it there). +  +- Simple one-line left prompt. No `prompt_subst`, no right prompt. Here `VD` is bound to increase + upon terminal shrinking due to the command line wrapping around. +  + +#### Zsh patch + +[This Zsh patch](https://github.com/romkatv/zsh/tree/fix-winchanged) fixes the issue on some +terminals. The idea behind the patch is to use `sc` (save cursor) terminal capability before +printing prompt and `rc` (restore cursor) to move cursor back to the original position when prompt +needs to be refreshed. + +The patch works only on terminals that reflow saved cursor position together with text when the +terminal window is resized. The patch has no observable effect on terminals that don't reflow text +on resize (both patched and unpatched Zsh behave correctly) and on terminals that reflow text but +not the saved cursor position (both patched and unpatched Zsh redraw prompt at the same incorrect +position). In other words, the patch fixes the resizing issue on some terminals while keeping the +behavior unchanged on others. + +There are two alternative approaches to patching Zsh that may seem to work at first glance but in +fact don't: + +- Instead of `sc`, use `u7` terminal capability to query the current cursor position and then `cup` + to go back to it. This doesn't work because the absolute position of the start of the current + prompt changes when text gets reflown. +- Recompute `VD` based on new terminal dimensions before attempting to refresh prompt. This doesn't + work because Zsh doesn't know whether terminal reflows text or truncates it. If Zsh could somehow + know that the terminal reflows text, this approach still wouldn't work on terminals that + continuously reflow text and rapid-fire `SIGWINCH` when the window is being resized. In such + environment real terminal dimensions go out of sync with what Zsh thinks the dimensions are. + +There is no ETA for the patch making its way into upstream Zsh. See [discussion]( + https://www.zsh.org/mla/workers//2019/msg00561.html). + +#### Mitigation + +There are a few mitigation options for this issue. + +- Use [kitty](https://sw.kovidgoyal.net/kitty/) terminal version >= 0.24.0 and enable terminal-shell + integration in Powerlevel10k by defining `POWERLEVEL9K_TERM_SHELL_INTEGRATION=true` in + `~/.p10k.zsh`. +- Apply [the patch](#zsh-patch) and [rebuild Zsh from source]( + https://github.com/zsh-users/zsh/blob/master/INSTALL). It won't help if you are using Alacritty, + kitty or some other terminal that reflows text on resize but doesn't reflow saved cursor position. + On such terminals the patch will have no visible effect. +- Disable text reflowing on window resize in terminal settings. If your terminal doesn't have this + setting, try a different terminal. +- Avoid long lines between the start of prompt and cursor. + 1. Disable ruler with `POWERLEVEL9K_SHOW_RULER=false`. + 2. Disable prompt connection with `POWERLEVEL9K_MULTILINE_FIRST_PROMPT_GAP_CHAR=' '`. + 3. Disable right frame with `POWERLEVEL9K_MULTILINE_FIRST_PROMPT_SUFFIX=''`, + `POWERLEVEL9K_MULTILINE_NEWLINE_PROMPT_SUFFIX=''` and + `POWERLEVEL9K_MULTILINE_LAST_PROMPT_SUFFIX=''`. + 4. Set `POWERLEVEL9K_RIGHT_PROMPT_ELEMENTS=()`. Right prompt on the last prompt line will cause + resizing issues only when the cursor is below it. This isn't very common, so you might want to + keep some elements in `POWERLEVEL9K_RIGHT_PROMPT_ELEMENTS` provided that none of them are + succeeded by `newline`. + +### Icons cut off in Konsole + +When using Konsole with a non-monospace font, icons may be cut off on the right side. Here +"non-monospace" refers to any font with glyphs wider than a single column, or wider than two columns +for glyphs designated as "wide" in the Unicode standard. + + + +The last line on the screenshot shows a cut off Arch Linux logo. + +There are several mitigation options for this issue. + +1. Use a different terminal. Konsole is the only terminal that exhibits this behavior. +2. Use a monospace font. +3. Manually add an extra space after the icon that gets cut off. For example, if the content of + `os_icon` prompt segment gets cut off, open `~/.p10k.zsh`, search for + `POWERLEVEL9K_OS_ICON_CONTENT_EXPANSION` and change it as follows: +```zsh +typeset -g POWERLEVEL9K_OS_ICON_CONTENT_EXPANSION='${P9K_CONTENT} ' # extra space at the end +``` +4. Use a different icon that is monospace. For example, if Arch Linux logo gets cut off, add + the following parameter to `~/.p10k.zsh`: +```zsh +typeset -g POWERLEVEL9K_LINUX_ARCH_ICON='Arch' # plain "Arch" in place of a logo +``` +5. Disable the display of the icon that gets cut off. For example, if the content of + `os_icon` prompt segment gets cut off, open `~/.p10k.zsh` and remove `os_icon` from + `POWERLEVEL9K_LEFT_PROMPT_ELEMENTS` and `POWERLEVEL9K_RIGHT_PROMPT_ELEMENTS`. + +*Note*: [Non-monospace fonts are not officially supported by Konsole]( + https://bugs.kde.org/show_bug.cgi?id=418553#c5). + +### Arch Linux logo has a dot in the bottom right corner + + + +Some fonts have this incorrect dotted icon in bold typeface. There are two ways to fix this issue. + +1. Use a font with a correct Arch Linux logo in bold typeface. For example, + [the recommended Powerlevel10k font](#meslo-nerd-font-patched-for-powerlevel10k). +2. Display the icon in regular (non-bold) typeface. To do this, open `~/.p10k.zsh`, search for + `POWERLEVEL9K_OS_ICON_CONTENT_EXPANSION` and remove `%B` from its value. +```zsh +typeset -g POWERLEVEL9K_OS_ICON_CONTENT_EXPANSION='${P9K_CONTENT}' # not bold +``` + +### Incorrect git status in prompt + +Powerlevel10k uses [gitstatusd](https://github.com/romkatv/gitstatus) to inspect the state of git +repositories. The project relies on the [libgit2](https://github.com/libgit2/libgit2) library, which +has some gaps in its implementation. Under some conditions, this may result in discrepancies between +the real state of a git repository (reflected by `git status`) and what gets shown in the +Powerlevel10k prompt. + +Most notably, [libgit2 does not support `skipHash`](https://github.com/libgit2/libgit2/issues/6531). +If you see incorrect git status in prompt, run `git config -l` and check whether `skipHash` is +enabled. If it is, consider disabling it. Keep in mind that `skipHash` may be implicitly enabled +when activating certain git features, such as `manyFiles`. |