if ! autoload -U is-at-least || ! is-at-least 5.1; then
() {
>&2 echo -E "You are using ZSH version $ZSH_VERSION. The minimum required version for Powerlevel10k is 5.1."
>&2 echo -E "Type 'echo \$ZSH_VERSION' to see your current zsh version."
local def=${SHELL:c:A}
local cur=${${ZSH_ARGZERO#-}:c:A}
local cur_v=$($cur -c 'echo -E $ZSH_VERSION' 2>/dev/null)
if [[ $cur_v == $ZSH_VERSION && $cur != $def ]]; then
>&2 echo -E "The shell you are currently running is likely $cur."
fi
local other=${${:-zsh}:c}
if [[ -n $other ]] && $other -c 'autoload -U is-at-least && is-at-least 5.1' &>/dev/null; then
local other_v=$($other -c 'echo -E $ZSH_VERSION' 2>/dev/null)
if [[ -n $other_v && $other_v != $ZSH_VERSION ]]; then
>&2 echo -E "You have $other with version $other_v but this is not what you are using."
if [[ -n $def && $def != ${other:A} ]]; then
>&2 echo -E "To change your user shell, type the following command:"
>&2 echo -E ""
if [[ $(grep -F $other /etc/shells 2>/dev/null) != $other ]]; then
>&2 echo -E " echo ${(q-)other} | sudo tee -a /etc/shells"
fi
>&2 echo -E " chsh -s ${(q-)other}"
fi
fi
fi
}
return 1
fi
source "${_p9k_installation_dir}/functions/utilities.zsh"
source "${_p9k_installation_dir}/functions/icons.zsh"
source "${_p9k_installation_dir}/functions/colors.zsh"
source "${_p9k_installation_dir}/functions/vcs.zsh"
typeset -g _P9K_RETVAL
typeset -g _P9K_CACHE_KEY
typeset -ga _P9K_CACHE_VAL
typeset -gA _P9K_CACHE
typeset -ga _P9K_T
typeset -g _P9K_N
typeset -gi _P9K_I
typeset -g _P9K_BG
typeset -g _P9K_F
# Specifies the maximum number of elements in the cache. When the cache grows over this limit,
# it gets cleared. This is meant to avoid memory leaks when a rogue prompt is filling the cache
# with data.
set_default -i POWERLEVEL9K_MAX_CACHE_SIZE 10000
# Caching allows storing array-to-array associations. It should be used like this:
#
# if ! _p9k_cache_get "$key1" "$key2"; then
# # Compute val1 and val2 and then store them in the cache.
# _p9k_cache_set "$val1" "$val2"
# fi
# # Here ${_P9K_CACHE_VAL[1]} and ${_P9K_CACHE_VAL[2]} are $val1 and $val2 respectively.
#
# Limitations:
#
# * Calling _p9k_cache_set without arguments clears the cache entry. Subsequent calls to
# _p9k_cache_get for the same key will return an error.
# * There must be no intervening _p9k_cache_get calls between the associated _p9k_cache_get
# and _p9k_cache_set.
_p9k_cache_set() {
# Uncomment to see cache misses.
# echo "caching: ${(@0q)_P9K_CACHE_KEY} => (${(q)@})" >&2
_P9K_CACHE[$_P9K_CACHE_KEY]="${(pj:\0:)*}0"
_P9K_CACHE_VAL=("$@")
(( $#_P9K_CACHE < POWERLEVEL9K_MAX_CACHE_SIZE )) || typeset -gAH _P9K_CACHE=()
}
_p9k_cache_get() {
_P9K_CACHE_KEY="${(pj:\0:)*}"
local v=$_P9K_CACHE[$_P9K_CACHE_KEY]
[[ -n $v ]] && _P9K_CACHE_VAL=("${(@0)${v[1,-2]}}")
}
# Sets _P9K_RETVAL to the icon whose name is supplied via $1.
_p9k_get_icon() {
local x=POWERLEVEL9K_$1
(( $+parameters[$x] )) && x=${(P)x} || x=$icons[$1]
_P9K_RETVAL=${(g::)x}
[[ $_P9K_RETVAL != $'\b'? ]] || _P9K_RETVAL="%{$_P9K_RETVAL%}" # penance for past sins
}
typeset -ga _P9K_LEFT_JOIN=(1)
typeset -ga _P9K_RIGHT_JOIN=(1)
_p9k_translate_color() {
if [[ $1 == <-> ]]; then # decimal color code: 255
_P9K_RETVAL=$1
elif [[ $1 == '#'* ]]; then # hexademical color code: #ffffff
_P9K_RETVAL=$1
else # named color: red
# Strip prifixes if there are any.
_P9K_RETVAL=$__P9K_COLORS[${${${1#bg-}#fg-}#br}]
fi
}
# Resolves a color to its numerical value, or an empty string. Communicates the result back
# by setting _P9K_RETVAL.
_p9k_color() {
local user_var=POWERLEVEL9K_${(U)${2}#prompt_}_${3}
_p9k_translate_color ${${(P)user_var}:-${1}}
}
_p9k_background() {
[[ -n $1 ]] && _P9K_RETVAL="%K{$1}" || _P9K_RETVAL="%k"
}
_p9k_foreground() {
[[ -n $1 ]] && _P9K_RETVAL="%F{$1}" || _P9K_RETVAL="%f"
}
_p9k_escape_rcurly() {
_P9K_RETVAL=${${1//\\/\\\\}//\}/\\\}}
}
# Begin a left prompt segment.
#
# * $1: Name of the function that was originally invoked.
# Necessary, to make the dynamic color-overwrite mechanism work.
# * $2: The array index of the current segment.
# * $3: Background color.
# * $4: Foreground color.
# * $5: An identifying icon (must be a key of the icons array).
# * $6: 1 to to perform parameter expansion and process substitution.
# * $7: If not empty but becomes empty after parameter expansion and process substitution,
# the segment isn't rendered.
# * $8+: The segment content
set_default POWERLEVEL9K_WHITESPACE_BETWEEN_LEFT_SEGMENTS " "
left_prompt_segment() {
if ! _p9k_cache_get "$0" "$1" "$2" "$3" "$4" "$5"; then
_p9k_color $3 $1 BACKGROUND
local bg_color=$_P9K_RETVAL
_p9k_background $bg_color
local bg=$_P9K_RETVAL
_p9k_color $4 $1 FOREGROUND
local fg_color=$_P9K_RETVAL
_p9k_foreground $fg_color
local fg=$_P9K_RETVAL
_p9k_get_icon LEFT_SUBSEGMENT_SEPARATOR
local subsep=$_P9K_RETVAL
_p9k_escape_rcurly $POWERLEVEL9K_WHITESPACE_BETWEEN_LEFT_SEGMENTS
local space=$_P9K_RETVAL
local icon
local -i has_icon
if [[ -n $5 ]]; then
_p9k_get_icon $5
if [[ -n $_P9K_RETVAL ]]; then
local glyph=$_P9K_RETVAL
_p9k_color $fg_color $1 VISUAL_IDENTIFIER_COLOR
_p9k_foreground $_P9K_RETVAL
icon=$_P9K_RETVAL$glyph
has_icon=1
fi
fi
# Segment separator logic:
#
# if [[ $_P9K_BG == NONE ]]; then
# 1
# elif (( joined )); then
# 2
# elif [[ $bg_color == $_P9K_BG ]]; then
# 3
# else
# 4
# fi
local t=$#_P9K_T
_P9K_T+=$bg$POWERLEVEL9K_WHITESPACE_BETWEEN_LEFT_SEGMENTS$icon # 1
_P9K_T+=$bg$icon # 2
if [[ -z $fg_color ]]; then
_p9k_foreground $DEFAULT_COLOR
_P9K_T+=$bg$_P9K_RETVAL$subsep$POWERLEVEL9K_WHITESPACE_BETWEEN_LEFT_SEGMENTS$icon # 3
else
_P9K_T+=$bg$fg$subsep$POWERLEVEL9K_WHITESPACE_BETWEEN_LEFT_SEGMENTS$icon # 3
fi
_p9k_get_icon LEFT_SEGMENT_SEPARATOR
_P9K_T+=$bg$_P9K_RETVAL$POWERLEVEL9K_WHITESPACE_BETWEEN_LEFT_SEGMENTS$icon # 4
local pre
pre+="\${_P9K_N::=}\${_P9K_F::=}"
pre+="\${\${\${_P9K_BG:-0}:#NONE}:-\${_P9K_N::=$((t+1))}}" # 1
pre+="\${_P9K_N:=\${\${\$((_P9K_I>=$_P9K_LEFT_JOIN[$2])):#0}:+$((t+2))}}" # 2
pre+="\${_P9K_N:=\${\${\$((!\${#\${:-0\$_P9K_BG}:#0$bg_color})):#0}:+$((t+3))}}" # 3
pre+="\${_P9K_N:=\${\${_P9K_F::=%F{\$_P9K_BG\}}+$((t+4))}}}+}" # 4
pre+="%b\${_P9K_F}\${_P9K_T[\$_P9K_N]}"
_p9k_escape_rcurly %b$bg$fg
local post="\${_P9K_C}$_P9K_RETVAL$space\${\${_P9K_I::=$2}+}\${\${_P9K_BG::=$bg_color}+}}"
_p9k_cache_set $has_icon $_P9K_RETVAL $pre $post
fi
local name=$1
local -i has_icon=${_P9K_CACHE_VAL[1]}
local style=${_P9K_CACHE_VAL[2]}
local -i expand=$6
local cond=${7:-1}
shift 7
local content="${(j::):-$style${^@}}"
(( expand )) || content="\${(Q)\${:-${(qqq)content}}}"
_P9K_PROMPT+="\${\${:-$cond}:+\${\${:-\${_P9K_C::=${content}}${_P9K_CACHE_VAL[3]}"
(( has_icon )) && _P9K_PROMPT+='${${(%):-$_P9K_C%1(l. .x)}[-1]%x}'
_P9K_PROMPT+=${_P9K_CACHE_VAL[4]}
}
# The same as left_prompt_segment above but for the right prompt.
set_default POWERLEVEL9K_WHITESPACE_BETWEEN_RIGHT_SEGMENTS " "
right_prompt_segment() {
if ! _p9k_cache_get "$0" "$1" "$2" "$3" "$4" "$5"; then
_p9k_color $3 $1 BACKGROUND
local bg_color=$_P9K_RETVAL
_p9k_background $bg_color
local bg=$_P9K_RETVAL
_p9k_color $4 $1 FOREGROUND
local fg_color=$_P9K_RETVAL
_p9k_foreground $fg_color
local fg=$_P9K_RETVAL
_p9k_get_icon RIGHT_SUBSEGMENT_SEPARATOR
local subsep=$_P9K_RETVAL
local icon_style icon
local -i has_icon
if [[ -n $5 ]]; then
_p9k_get_icon $5
if [[ -n $_P9K_RETVAL ]]; then
_p9k_escape_rcurly $_P9K_RETVAL
icon=$_P9K_RETVAL
_p9k_color $fg_color $1 VISUAL_IDENTIFIER_COLOR
_p9k_foreground $_P9K_RETVAL
_p9k_escape_rcurly %b$bg$_P9K_RETVAL
icon_style=$_P9K_RETVAL
has_icon=1
fi
fi
# Segment separator logic is the same as in left_prompt_segment except that here #4 and #1 are
# identical.
local t=$#_P9K_T
_p9k_get_icon RIGHT_SEGMENT_SEPARATOR
_P9K_T+="%F{$bg_color}$_P9K_RETVAL$bg$POWERLEVEL9K_WHITESPACE_BETWEEN_RIGHT_SEGMENTS$fg" # 1
_P9K_T+=$fg # 2
if [[ -z $fg_color ]]; then
_p9k_foreground $DEFAULT_COLOR
_P9K_T+=$bg$_P9K_RETVAL$subsep$POWERLEVEL9K_WHITESPACE_BETWEEN_RIGHT_SEGMENTS$fg # 3
else
_P9K_T+=$bg$fg$subsep$POWERLEVEL9K_WHITESPACE_BETWEEN_RIGHT_SEGMENTS # 3
fi
local pre
pre+="\${_P9K_N::=}"
pre+="\${\${\${_P9K_BG:-0}:#NONE}:-\${_P9K_N::=$((t+1))}}" # 1
pre+="\${_P9K_N:=\${\${\$((_P9K_I>=$_P9K_RIGHT_JOIN[$2])):#0}:+$((t+2))}}" # 2
pre+="\${_P9K_N:=\${\${\$((!\${#\${:-0\$_P9K_BG}:#0$bg_color})):#0}:+$((t+3))}}" # 3
pre+="\${_P9K_N:=$((t+1))}}+}" # 4 == 1
(( _P9K_EMULATE_ZERO_RPROMPT_INDENT )) && pre+=' '
pre+="\${_P9K_T[\$_P9K_N]}\${_P9K_C}$icon_style"
if (( _P9K_EMULATE_ZERO_RPROMPT_INDENT )); then
local space=''
else
_p9k_escape_rcurly $POWERLEVEL9K_WHITESPACE_BETWEEN_RIGHT_SEGMENTS
local space=$_P9K_RETVAL
fi
_p9k_escape_rcurly %b$bg$fg
local post="$icon$_P9K_RETVAL$space\${\${_P9K_I::=$2}+}\${\${_P9K_BG::=$bg_color}+}}"
_p9k_cache_set $has_icon $_P9K_RETVAL $pre $post
fi
local -i has_icon=${_P9K_CACHE_VAL[1]}
local style=${_P9K_CACHE_VAL[2]}
local -i expand=$6
local cond=${7:-1}
shift 7
_p9k_escape_rcurly $style
local content="${(j::):-$_P9K_RETVAL${^@}}"
(( expand )) || content="\${(Q)\${:-${(qqq)content}}}"
_P9K_PROMPT+="\${\${:-$cond}:+\${\${:-\${_P9K_C::=${content}}${_P9K_CACHE_VAL[3]}"
(( has_icon )) && _P9K_PROMPT+='${${(%):-$_P9K_C%1(l. .x)}[-1]%x}'
_P9K_PROMPT+=${_P9K_CACHE_VAL[4]}
}
function _p9k_python_version() {
_p9k_cached_cmd_stdout_stderr python --version || return
emulate -L zsh && setopt extended_glob
[[ $_P9K_RETVAL == (#b)Python\ ([[:digit:].]##)* ]] && _P9K_RETVAL=$match[1]
}
################################################################
# Prompt Segment Definitions
################################################################
################################################################
# Anaconda Environment
set_default POWERLEVEL9K_ANACONDA_LEFT_DELIMITER "("
set_default POWERLEVEL9K_ANACONDA_RIGHT_DELIMITER ")"
set_default POWERLEVEL9K_ANACONDA_SHOW_PYTHON_VERSION true
prompt_anaconda() {
local p=${CONDA_PREFIX:-$CONDA_ENV_PATH}
[[ -n $p ]] || return
local msg=''
if [[ $POWERLEVEL9K_ANACONDA_SHOW_PYTHON_VERSION == true ]] && _p9k_python_version; then
msg="$_P9K_RETVAL "
fi
msg+="$POWERLEVEL9K_ANACONDA_LEFT_DELIMITER${${${p:t}//\%/%%}//\\/\\\\}$POWERLEVEL9K_ANACONDA_RIGHT_DELIMITER"
"$1_prompt_segment" "$0" "$2" "blue" "$DEFAULT_COLOR" 'PYTHON_ICON' 0 '' "$msg"
}
################################################################
# AWS Profile
prompt_aws() {
local aws_profile="${AWS_PROFILE:-$AWS_DEFAULT_PROFILE}"
if [[ -n "$aws_profile" ]]; then
"$1_prompt_segment" "$0" "$2" red white 'AWS_ICON' 0 '' "${${aws_profile//\%/%%}//\\/\\\\}"
fi
}
################################################################
# Current Elastic Beanstalk environment
prompt_aws_eb_env() {
[[ -r .elasticbeanstalk/config.yml ]] || return
local v=${=$(command grep environment .elasticbeanstalk/config.yml 2>/dev/null)[2]}
[[ -n $v ]] && "$1_prompt_segment" "$0" "$2" black green 'AWS_EB_ICON' 0 '' "${${v//\%/%%}//\\/\\\\}"
}
################################################################
# Segment to indicate background jobs with an icon.
set_default POWERLEVEL9K_BACKGROUND_JOBS_VERBOSE true
set_default POWERLEVEL9K_BACKGROUND_JOBS_VERBOSE_ALWAYS false
prompt_background_jobs() {
local msg
if [[ $POWERLEVEL9K_BACKGROUND_JOBS_VERBOSE == true ]]; then
if [[ $POWERLEVEL9K_BACKGROUND_JOBS_VERBOSE_ALWAYS == true ]]; then
msg='${(%):-%j}'
else
msg='${${(%):-%j}:#1}'
fi
fi
$1_prompt_segment $0 $2 "$DEFAULT_COLOR" cyan BACKGROUND_JOBS_ICON 1 '${${(%):-%j}:#0}' "$msg"
}
typeset -g _P9K_XY _P9K_CLM _P9K_ALIGNED_RPROMPT
typeset -gi _P9K_X _P9K_Y _P9K_M _P9K_RPROMPT_DONE _P9K_IND
# Returns 1 if the cursor is at the very end of the screen.
function _p9k_left_prompt_end_line() {
_p9k_get_icon LEFT_SEGMENT_SEPARATOR
_p9k_escape_rcurly $_P9K_RETVAL
_P9K_PROMPT+="%k%b"
_P9K_PROMPT+="\${_P9K_N::=}"
_P9K_PROMPT+="\${\${\${_P9K_BG:#NONE}:-\${_P9K_N:=1}}+}"
_P9K_PROMPT+="\${\${_P9K_N:=2}+}"
_P9K_PROMPT+="\${\${_P9K_T[2]::=%F{\$_P9K_BG\}$_P9K_RETVAL}+}"
_P9K_PROMPT+="\${_P9K_T[\$_P9K_N]}"
_P9K_PROMPT+="%f$1%f%k%b"
if (( ! _P9K_RPROMPT_DONE )); then
_P9K_PROMPT+=$_P9K_ALIGNED_RPROMPT
_P9K_RPROMPT_DONE=1
return 1
fi
}
################################################################
# A newline in your prompt, so you can segments on multiple lines.
set_default POWERLEVEL9K_PROMPT_ON_NEWLINE false
set_default POWERLEVEL9K_RPROMPT_ON_NEWLINE false
prompt_newline() {
[[ "$1" == "right" ]] && return
_p9k_left_prompt_end_line && _P9K_PROMPT+=$'\n'
_P9K_PROMPT+='${${_P9K_BG::=NONE}+}'
if [[ $POWERLEVEL9K_PROMPT_ON_NEWLINE == true ]]; then
_p9k_get_icon MULTILINE_NEWLINE_PROMPT_PREFIX
_P9K_PROMPT+=$_P9K_RETVAL
fi
}
################################################################
# Segment that indicates usage level of current partition.
set_default POWERLEVEL9K_DISK_USAGE_ONLY_WARNING false
set_default -i POWERLEVEL9K_DISK_USAGE_WARNING_LEVEL 90
set_default -i POWERLEVEL9K_DISK_USAGE_CRITICAL_LEVEL 95
prompt_disk_usage() {
(( $+commands[df] )) || return
local disk_usage=${${=${(f)"$(command df -P . 2>/dev/null)"}[2]}[5]%%%}
local state bg fg
if (( disk_usage >= POWERLEVEL9K_DISK_USAGE_CRITICAL_LEVEL )); then
state=critical
bg=red
fg=white
elif (( disk_usage >= POWERLEVEL9K_DISK_USAGE_WARNING_LEVEL )); then
state=warning
bg=yellow
fg=$DEFAULT_COLOR
else
[[ "$POWERLEVEL9K_DISK_USAGE_ONLY_WARNING" == true ]] && return
state=normal
bg=$DEFAULT_COLOR
fg=yellow
fi
$1_prompt_segment $0_$state $2 $bg $fg DISK_ICON 0 '' "$disk_usage%%"
}
################################################################
# Segment that displays the battery status in levels and colors
set_default -i POWERLEVEL9K_BATTERY_LOW_THRESHOLD 10
set_default -i POWERLEVEL9K_BATTERY_HIDE_ABOVE_THRESHOLD 999
set_default -a POWERLEVEL9K_BATTERY_LEVEL_BACKGROUND
set_default POWERLEVEL9K_BATTERY_VERBOSE true
typeset -g POWERLEVEL9K_BATTERY_STAGES
function _p9k_read_file() {
_P9K_RETVAL=''
[[ -n $1 ]] && read -r _P9K_RETVAL <$1
[[ -n $_P9K_RETVAL ]]
}
prompt_battery() {
local state remain
local -i bat_percent
case $OS in
OSX)
(( $+commands[pmset] )) || return
local raw_data=${${(f)"$(command pmset -g batt 2>/dev/null)"}[2]}
[[ $raw_data == *InternalBattery* ]] || return
remain=${${(s: :)${${(s:; :)raw_data}[3]}}[1]}
[[ $remain == *no* ]] && remain="..."
[[ $raw_data =~ '([0-9]+)%' ]] && bat_percent=$match[1]
case "${${(s:; :)raw_data}[2]}" in
'charging'|'finishing charge'|'AC attached')
state=charging
;;
'discharging')
(( bat_percent < POWERLEVEL9K_BATTERY_LOW_THRESHOLD )) && state=low || state=disconnected
;;
*)
state=charged
remain=''
;;
esac
;;
Linux|Android)
local -a bats=( /sys/class/power_supply/(BAT*|battery)/(FN) )
(( $#bats )) || return
local -i energy_now energy_full power_now
local -i is_full=1 is_calculating is_charching
local dir
for dir in $bats; do
local -i pow=0 full=0
if _p9k_read_file $dir/(energy_full|charge_full|charge_counter)(N); then
(( energy_full += ${full::=_P9K_RETVAL} ))
fi
if _p9k_read_file $dir/(power|current)_now(N) && (( $#_P9K_RETVAL < 9 )); then
(( power_now += ${pow::=$_P9K_RETVAL} ))
fi
if _p9k_read_file $dir/(energy|charge)_now(N); then
(( energy_now += _P9K_RETVAL ))
elif _p9k_read_file $dir/capacity(N); then
(( energy_now += _P9K_RETVAL * full / 100. + 0.5 ))
fi
_p9k_read_file $dir/status(N) && local bat_status=$_P9K_RETVAL || continue
[[ $bat_status != Full ]] && is_full=0
[[ $bat_status == Charging ]] && is_charching=1
[[ $bat_status == (Charging|Discharging) && $pow == 0 ]] && is_calculating=1
done
(( energy_full )) || return
bat_percent=$(( 100. * energy_now / energy_full + 0.5 ))
(( bat_percent > 100 )) && bat_percent=100
if (( is_full || bat_percent == 100 )); then
state=charged
else
if (( is_charching )); then
state=charging
elif (( bat_percent < POWERLEVEL9K_BATTERY_LOW_THRESHOLD )); then
state=low
else
state=disconnected
fi
if (( power_now > 0 )); then
(( is_charching )) && local -i e=$((energy_full - energy_now)) || local -i e=energy_now
local -i minutes=$(( 60 * e / power_now ))
(( minutes > 0 )) && remain=$((minutes/60)):${(l#2##0#)$((minutes%60))}
elif (( is_calculating )); then
remain="..."
fi
fi
;;
*)
return
;;
esac
(( bat_percent >= POWERLEVEL9K_BATTERY_HIDE_ABOVE_THRESHOLD )) && return
local msg="$bat_percent%%"
[[ $POWERLEVEL9K_BATTERY_VERBOSE == true && -n $remain ]] && msg+=" ($remain)"
local icon=BATTERY_ICON
if (( $#POWERLEVEL9K_BATTERY_STAGES )); then
local -i idx=$#POWERLEVEL9K_BATTERY_STAGES
(( bat_percent < 100 )) && idx=$((bat_percent * $#POWERLEVEL9K_BATTERY_STAGES / 100 + 1))
icon+=_$idx
typeset -g POWERLEVEL9K_$icon=$POWERLEVEL9K_BATTERY_STAGES[idx]
fi
local bg=$DEFAULT_COLOR
if (( $#POWERLEVEL9K_BATTERY_LEVEL_BACKGROUND )); then
local -i idx=$#POWERLEVEL9K_BATTERY_LEVEL_BACKGROUND
(( bat_percent < 100 )) && idx=$((bat_percent * $#POWERLEVEL9K_BATTERY_LEVEL_BACKGROUND / 100 + 1))
bg=$POWERLEVEL9K_BATTERY_LEVEL_BACKGROUND[idx]
fi
$1_prompt_segment $0_$state $2 "$bg" "$_P9K_BATTERY_STATES[$state]" $icon 0 '' $msg
}
typeset -gF _P9K_PUBLIC_IP_TIMESTAMP
typeset -g _P9K_PUBLIC_IP
################################################################
# Public IP segment
set_default -i POWERLEVEL9K_PUBLIC_IP_TIMEOUT 300
set_default -a POWERLEVEL9K_PUBLIC_IP_METHODS dig curl wget
set_default POWERLEVEL9K_PUBLIC_IP_NONE ""
set_default POWERLEVEL9K_PUBLIC_IP_HOST "http://ident.me"
set_default POWERLEVEL9K_PUBLIC_IP_VPN_INTERFACE ""
prompt_public_ip() {
if (( ! $#_P9K_PUBLIC_IP || EPOCHREALTIME >= _P9K_PUBLIC_IP_TIMESTAMP + POWERLEVEL9K_PUBLIC_IP_TIMEOUT )); then
_P9K_PUBLIC_IP=''
local method
for method in $POWERLEVEL9K_PUBLIC_IP_METHODS; do
case $method in
'dig')
if (( $+commands[dig] )); then
_P9K_PUBLIC_IP="$(command dig +time=1 +tries=1 +short myip.opendns.com @resolver1.opendns.com 2> /dev/null)"
[[ $_P9K_PUBLIC_IP == ';'* ]] && _P9K_PUBLIC_IP=''
fi
;;
'curl')
if (( $+commands[curl] )); then
_P9K_PUBLIC_IP="$(command curl --max-time 10 -w '\n' "$POWERLEVEL9K_PUBLIC_IP_HOST" 2> /dev/null)"
fi
;;
'wget')
if (( $+commands[wget] )); then
_P9K_PUBLIC_IP="$(wget -T 10 -qO- "$POWERLEVEL9K_PUBLIC_IP_HOST" 2> /dev/null)"
fi
;;
esac
if [[ -n $_P9K_PUBLIC_IP ]]; then
_P9K_PUBLIC_IP_TIMESTAMP=$EPOCHREALTIME
break
fi
done
fi
local ip=${_P9K_PUBLIC_IP:-$POWERLEVEL9K_PUBLIC_IP_NONE}
[[ -n $ip ]] || return
local icon='PUBLIC_IP_ICON'
if [[ -n $POWERLEVEL9K_PUBLIC_IP_VPN_INTERFACE ]]; then
_p9k_parse_ip $POWERLEVEL9K_PUBLIC_IP_VPN_INTERFACE && icon='VPN_ICON'
fi
$1_prompt_segment "$0" "$2" "$DEFAULT_COLOR" "$DEFAULT_COLOR_INVERTED" "$icon" 0 '' "${${ip//\%/%%}//\\/\\\\}"
}
################################################################
# Context: user@hostname (who am I and where am I)
# Note that if $DEFAULT_USER is not set, this prompt segment will always print
set_default POWERLEVEL9K_ALWAYS_SHOW_CONTEXT false
set_default POWERLEVEL9K_ALWAYS_SHOW_USER false
set_default POWERLEVEL9K_CONTEXT_TEMPLATE "%n@%m"
prompt_context() {
local content
if [[ $POWERLEVEL9K_ALWAYS_SHOW_CONTEXT == true || -z $DEFAULT_USER || -n $SSH_CLIENT || -n $SSH_TTY ]]; then
content=$POWERLEVEL9K_CONTEXT_TEMPLATE
else
local user=$(whoami)
if [[ $user != $DEFAULT_USER ]]; then
content="${POWERLEVEL9K_CONTEXT_TEMPLATE}"
elif [[ $POWERLEVEL9K_ALWAYS_SHOW_USER == true ]]; then
content="${${user//\%/%%}//\\/\\\\}"
else
return
fi
fi
local current_state="DEFAULT"
if [[ "${(%):-%#}" == '#' ]]; then
current_state="ROOT"
elif [[ -n "$SSH_CLIENT" || -n "$SSH_TTY" ]]; then
if [[ -n "$SUDO_COMMAND" ]]; then
current_state="REMOTE_SUDO"
else
current_state="REMOTE"
fi
elif [[ -n "$SUDO_COMMAND" ]]; then
current_state="SUDO"
fi
"$1_prompt_segment" "${0}_${current_state}" "$2" "$DEFAULT_COLOR" yellow '' 0 '' "${content}"
}
################################################################
# User: user (who am I)
# Note that if $DEFAULT_USER is not set, this prompt segment will always print
set_default POWERLEVEL9K_USER_TEMPLATE "%n"
prompt_user() {
local user=$(whoami)
[[ $POWERLEVEL9K_ALWAYS_SHOW_USER != true && $user == $DEFAULT_USER ]] && return
if [[ "${(%):-%#}" == '#' ]]; then
"$1_prompt_segment" "${0}_ROOT" "$2" "${DEFAULT_COLOR}" yellow ROOT_ICON 0 '' "${POWERLEVEL9K_USER_TEMPLATE}"
elif [[ -n "$SUDO_COMMAND" ]]; then
"$1_prompt_segment" "${0}_SUDO" "$2" "${DEFAULT_COLOR}" yellow SUDO_ICON 0 '' "${POWERLEVEL9K_USER_TEMPLATE}"
else
"$1_prompt_segment" "${0}_DEFAULT" "$2" "${DEFAULT_COLOR}" yellow USER_ICON 0 '' "${${user//\%/%%}//\\/\\\\}"
fi
}
################################################################
# Host: machine (where am I)
set_default POWERLEVEL9K_HOST_TEMPLATE "%m"
prompt_host() {
if [[ -n "$SSH_CLIENT" || -n "$SSH_TTY" ]]; then
"$1_prompt_segment" "$0_REMOTE" "$2" "${DEFAULT_COLOR}" yellow SSH_ICON 0 '' "${POWERLEVEL9K_HOST_TEMPLATE}"
else
"$1_prompt_segment" "$0_LOCAL" "$2" "${DEFAULT_COLOR}" yellow HOST_ICON 0 '' "${POWERLEVEL9K_HOST_TEMPLATE}"
fi
}
################################################################
# The 'custom` prompt provides a way for users to invoke commands and display
# the output in a segment.
prompt_custom() {
local segment_name="${3:u}"
# Get content of custom segment
local command="POWERLEVEL9K_CUSTOM_${segment_name}"
local -a cmd=("${(@Q)${(z)${(P):-POWERLEVEL9K_CUSTOM_${segment_name}}}}")
whence $cmd[1] &>/dev/null || return
local content=$("$cmd[@]")
[[ -n $content ]] || return
"$1_prompt_segment" "${0}_${3:u}" "$2" $DEFAULT_COLOR_INVERTED $DEFAULT_COLOR "CUSTOM_${segment_name}_ICON" 0 '' "$content"
}
################################################################
# Display the duration the command needed to run.
typeset -gF _P9K_COMMAND_DURATION
set_default -i POWERLEVEL9K_COMMAND_EXECUTION_TIME_THRESHOLD 3
set_default -i POWERLEVEL9K_COMMAND_EXECUTION_TIME_PRECISION 2
prompt_command_execution_time() {
(( _P9K_COMMAND_DURATION < POWERLEVEL9K_COMMAND_EXECUTION_TIME_THRESHOLD )) && return
if (( _P9K_COMMAND_DURATION < 60 )); then
if [[ $POWERLEVEL9K_COMMAND_EXECUTION_TIME_PRECISION == 0 ]]; then
local -i text=_P9K_COMMAND_DURATION
else
local -F $POWERLEVEL9K_COMMAND_EXECUTION_TIME_PRECISION text=_P9K_COMMAND_DURATION
fi
else
local -i d=_P9K_COMMAND_DURATION
local text=${(l.2..0.)$((d % 60))}
if (( d >= 60 )); then
text=${(l.2..0.)$((d / 60 % 60))}:$text
if (( d >= 36000 )); then
text=$((d / 3600)):$text
elif (( d >= 3600 )); then
text=0$((d / 3600)):$text
fi
fi
fi
"$1_prompt_segment" "$0" "$2" "red" "yellow1" 'EXECUTION_TIME_ICON' 0 '' $text
}
set_default POWERLEVEL9K_DIR_PATH_SEPARATOR "/"
set_default POWERLEVEL9K_HOME_FOLDER_ABBREVIATION "~"
set_default POWERLEVEL9K_DIR_PATH_HIGHLIGHT_BOLD false
set_default POWERLEVEL9K_DIR_PATH_ABSOLUTE false
set_default POWERLEVEL9K_DIR_SHOW_WRITABLE false
set_default POWERLEVEL9K_DIR_OMIT_FIRST_CHARACTER false
set_default POWERLEVEL9K_SHORTEN_STRATEGY ""
set_default POWERLEVEL9K_DIR_PATH_SEPARATOR_FOREGROUND ""
set_default POWERLEVEL9K_SHORTEN_FOLDER_MARKER "(.shorten_folder_marker|.bzr|CVS|.git|.hg|.svn|.terraform|.citc)"
# Stop shortening the directory once its length is no greater than this. The value can be either
# absolute (e.g., '50') or a percentage of terminal width (e.g, '50%').
#
# Currently only applied when POWERLEVEL9K_SHORTEN_STRATEGY=truncate_to_unique. If you want to use
# it with another shortening strategy, open an issue.
set_default POWERLEVEL9K_DIR_MAX_LENGTH 0
# Individual elements are patterns. They are expanded with the options set
# by `emulate zsh && setopt extended_glob`.
set_default -a POWERLEVEL9K_DIR_PACKAGE_FILES package.json composer.json
function _p9k_shorten_delim_len() {
local def=$1
_P9K_RETVAL=${POWERLEVEL9K_SHORTEN_DELIMITER_LENGTH:--1}
(( _P9K_RETVAL >= 0 )) || _p9k_prompt_length $1
}
################################################################
# Dir: current working directory
prompt_dir() {
emulate -L zsh && setopt extended_glob
[[ $POWERLEVEL9K_DIR_PATH_ABSOLUTE == true ]] && local p=$PWD || local p=${(%):-%~}
if [[ $p == '~['* ]]; then
# If "${(%):-%~}" expands to "~[a]/]/b", is the first component "~[a]" or "~[a]/]"?
# One would expect "${(%):-%-1~}" to give the right answer but alas it always simply
# gives the segment before the first slash, which would be "~[a]" in this case. Worse,
# for "~[a/b]" it'll give the nonsensical "~a[". To solve this problem we have to
# repeat what "${(%):-%~}" does and hope that it produces the same result.
local func=''
local -a parts=()
for func in zsh_directory_name $zsh_directory_name_functions; do
if (( $+functions[$func] )) && $func d $PWD && [[ $p == '~['$reply[1]']'* ]]; then
parts+='~['$reply[1]']'
break
fi
done
if (( $#parts )); then
parts+=(${(s:/:)${p#$parts[1]}})
else
p=$PWD
parts=("${(s:/:)p}")
fi
else
local -a parts=("${(s:/:)p}")
fi
local -i fake_first=0
local delim=${POWERLEVEL9K_SHORTEN_DELIMITER-$'\u2026'}
local -i shortenlen=${POWERLEVEL9K_SHORTEN_DIR_LENGTH:--1}
case $POWERLEVEL9K_SHORTEN_STRATEGY in
truncate_absolute|truncate_absolute_chars)
if (( shortenlen > 0 && $#p > shortenlen )); then
_p9k_shorten_delim_len $delim
if (( $#p > shortenlen + $_P9K_RETVAL )); then
local -i n=shortenlen
local -i i=$#parts
while true; do
local dir=$parts[i]
local -i len=$(( $#dir + (i > 1) ))
if (( len <= n )); then
(( n -= len ))
(( --i ))
else
parts[i]=$'\0'$dir[-n,-1]
parts[1,i-1]=()
break
fi
done
fi
fi
;;
truncate_with_package_name|truncate_middle|truncate_from_right)
() {
[[ $POWERLEVEL9K_SHORTEN_STRATEGY == truncate_with_package_name &&
$+commands[jq] == 1 && $#POWERLEVEL9K_DIR_PACKAGE_FILES > 0 ]] || return
local pat="(${(j:|:)POWERLEVEL9K_DIR_PACKAGE_FILES})"
local -i i=$#parts
local dir=$PWD
for (( ; i > 0; --i )); do
local pkg_file=''
for pkg_file in $dir/${~pat}(N); do
local -H stat=()
zstat -H stat -- $pkg_file 2>/dev/null || return
if ! _p9k_cache_get $0_pkg $stat[inode] $stat[mtime] $stat[size]; then
local pkg_name=''
pkg_name=$(command jq -j '.name' <$pkg_file 2>/dev/null) || pkg_name=''
_p9k_cache_set "$pkg_name"
fi
[[ -n $_P9K_CACHE_VAL[1] ]] || return
parts[1,i]=($_P9K_CACHE_VAL[1])
fake_first=1
return
done
dir=${dir:h}
done
}
if (( shortenlen > 0 )); then
_p9k_shorten_delim_len $delim
local -i d=_P9K_RETVAL pref=shortenlen suf=0 i=2
[[ $POWERLEVEL9K_SHORTEN_STRATEGY == truncate_middle ]] && suf=pref
for (( ; i < $#parts; ++i )); do
local dir=$parts[i]
if (( $#dir > pref + suf + d )); then
dir[pref+1,-suf-1]=$'\0'
parts[i]=$dir
fi
done
fi
;;
truncate_to_last)
fake_first=$(($#parts > 1))
parts[1,-2]=()
;;
truncate_to_first_and_last)
if (( shortenlen > 0 )); then
local -i i=$(( shortenlen + 1 ))
[[ $p == /* ]] && (( ++i ))
for (( ; i <= $#parts - shortenlen; ++i )); do
parts[i]=$'\0'
done
fi
;;
truncate_to_unique)
local -i i=2 n=1
[[ $p == /* ]] && (( ++i ))
delim=${POWERLEVEL9K_SHORTEN_DELIMITER-'*'}
_p9k_prompt_length $delim
local -i real_delim_len=_P9K_RETVAL
local -i d=${POWERLEVEL9K_SHORTEN_DELIMITER_LENGTH:--1}
(( d >= 0 )) || d=real_delim_len
shortenlen=${POWERLEVEL9K_SHORTEN_DIR_LENGTH:-1}
(( shortenlen >= 0 )) && n=shortenlen
if [[ $POWERLEVEL9K_DIR_MAX_LENGTH == *% ]]; then
local -i max_len=$(( COLUMNS * $POWERLEVEL9K_DIR_MAX_LENGTH[1,-2] / 100 ))
else
local -i max_len=POWERLEVEL9K_DIR_MAX_LENGTH
fi
local -i len=$#p
local parent="${PWD%/${(pj./.)parts[i,-1]}}"
for (( ; len > max_len && i <= $#parts - n; ++i )); do
local dir=$parts[i]
if [[ -n $POWERLEVEL9K_SHORTEN_FOLDER_MARKER &&
-n $parent/$dir/${~POWERLEVEL9K_SHORTEN_FOLDER_MARKER}(#qN) ]]; then
parent+=/$dir
continue
fi
local -i j=1
for (( ; j + d < $#dir; ++j )); do
local -a matching=($parent/$dir[1,j]*/(N))
(( $#matching == 1 )) && break
done
if (( j + d < $#dir )); then
(( len -= ($#dir - j - real_delim_len) ))
parts[i]=$dir[1,j]$'\0'
fi
parent+=/$dir
done
;;
truncate_with_folder_marker)
if [[ -n $POWERLEVEL9K_SHORTEN_FOLDER_MARKER ]]; then
local dir=$PWD
local -a m=()
local -i i=$(($#parts - 1))
for (( ; i > 1; --i )); do
dir=${dir:h}
[[ -n $dir/${~POWERLEVEL9K_SHORTEN_FOLDER_MARKER}(#qN) ]] && m+=$i
done
m+=1
for (( i=1; i < $#m; ++i )); do
(( m[i] - m[i+1] > 2 )) && parts[m[i+1]+1,m[i]-1]=($'\0')
done
fi
;;
*)
if (( shortenlen > 0 )); then
local -i len=$#parts
[[ -z $parts[1] ]] && (( --len ))
if (( len > shortenlen )); then
parts[1,-shortenlen-1]=($'\0')
fi
fi
;;
esac
[[ $POWERLEVEL9K_DIR_SHOW_WRITABLE == true && ! -w $PWD ]]
local w=$?
if ! _p9k_cache_get $0 $w $fake_first "$delim" "${parts[@]}"; then
local state='' icon=''
if (( ! w )); then
state=NOT_WRITABLE
icon=LOCK_ICON
else
case $PWD in
/etc|/etc/*) state=ETC; icon=ETC_ICON;;
~) state=HOME; icon=HOME_ICON;;
~/*) state=HOME_SUBFOLDER; icon=HOME_SUB_ICON;;
*) state=DEFAULT; icon=FOLDER_ICON;;
esac
fi
local style=%b
_p9k_color blue $0_$state BACKGROUND
_p9k_background $_P9K_RETVAL
style+=$_P9K_RETVAL
_p9k_color "$DEFAULT_COLOR" "$0_$state" FOREGROUND
_p9k_foreground $_P9K_RETVAL
style+=$_P9K_RETVAL
parts=("${(@)${(@)parts//\%/%%}//\\/\\\\}")
[[ $fake_first == 0 && $parts[1] == '~' ]] && parts[1]=$POWERLEVEL9K_HOME_FOLDER_ABBREVIATION$style
[[ $POWERLEVEL9K_DIR_OMIT_FIRST_CHARACTER == true && $#parts > 1 && -n $parts[2] ]] && parts[1]=()
local last_fg=
[[ $POWERLEVEL9K_DIR_PATH_HIGHLIGHT_BOLD == true ]] && last_fg+=%B
if [[ -n $POWERLEVEL9K_DIR_PATH_HIGHLIGHT_FOREGROUND ]]; then
_p9k_translate_color $POWERLEVEL9K_DIR_PATH_HIGHLIGHT_FOREGROUND
_p9k_foreground $_P9K_RETVAL
last_fg+=$_P9K_RETVAL
fi
parts[-1]=$last_fg${parts[-1]//$'\0'/$'\0'$last_fg}$style
parts=("${(@)parts//$'\0'/$delim$style}")
local sep=$POWERLEVEL9K_DIR_PATH_SEPARATOR$style
if [[ -n $POWERLEVEL9K_DIR_PATH_SEPARATOR_FOREGROUND ]]; then
_p9k_translate_color $POWERLEVEL9K_DIR_PATH_SEPARATOR_FOREGROUND
_p9k_foreground $_P9K_RETVAL
sep=$_P9K_RETVAL$sep
fi
_p9k_cache_set "$0_$state" "$2" blue "$DEFAULT_COLOR" "$icon" 0 "" "${(pj.$sep.)parts}"
fi
"$1_prompt_segment" "$_P9K_CACHE_VAL[@]"
}
################################################################
# Docker machine
prompt_docker_machine() {
if [[ -n "$DOCKER_MACHINE_NAME" ]]; then
"$1_prompt_segment" "$0" "$2" "magenta" "$DEFAULT_COLOR" 'SERVER_ICON' 0 '' "${${DOCKER_MACHINE_NAME//\%/%%}//\\/\\\\}"
fi
}
################################################################
# GO prompt
prompt_go_version() {
_p9k_cached_cmd_stdout go version || return
emulate -L zsh && setopt extendedglob
local -a match
[[ $_P9K_RETVAL == (#b)*go([[:digit:].]##)* ]] || return
local v=$match[1]
local p=$GOPATH
if [[ -z $p ]]; then
if [[ -d $HOME/go ]]; then
p=$HOME/go
else
p=$(command go env GOPATH 2>/dev/null) && [[ -n $p ]] || return
fi
fi
if [[ $PWD/ != $p/* ]]; then
local dir=$PWD
while [[ ! -e $dir/go.mod ]]; do
[[ $dir == / ]] && return
dir=${dir:h}
done
fi
"$1_prompt_segment" "$0" "$2" "green" "grey93" "GO_ICON" 0 '' "${${v//\%/%%}//\\/\\\\}"
}
################################################################
# Command number (in local history)
prompt_history() {
"$1_prompt_segment" "$0" "$2" "grey50" "$DEFAULT_COLOR" '' 0 '' '%h'
}
################################################################
# Detection for virtualization (systemd based systems only)
prompt_detect_virt() {
(( $+commands[systemd-detect-virt] )) || return
local virt=$(command systemd-detect-virt 2>/dev/null)
if [[ "$virt" == "none" ]]; then
[[ "$(command ls -di /)" != "2 /" ]] && virt="chroot"
fi
if [[ -n "${virt}" ]]; then
"$1_prompt_segment" "$0" "$2" "$DEFAULT_COLOR" "yellow" '' 0 '' "${${virt//\%/%%}//\\/\\\\}"
fi
}
################################################################
# Test icons
prompt_icons_test() {
for key in ${(@k)icons}; do
# The lower color spectrum in ZSH makes big steps. Choosing
# the next color has enough contrast to read.
local random_color=$((RANDOM % 8))
local next_color=$((random_color+1))
"$1_prompt_segment" "$0" "$2" "$random_color" "$next_color" "$key" 0 '' "$key"
done
}
################################################################
# Segment to display the current IP address
set_default POWERLEVEL9K_IP_INTERFACE "^[^ ]+"
prompt_ip() {
_p9k_parse_ip $POWERLEVEL9K_IP_INTERFACE || return
"$1_prompt_segment" "$0" "$2" "cyan" "$DEFAULT_COLOR" 'NETWORK_ICON' 0 '' "${${_P9K_RETVAL//\%/%%}//\\/\\\\}"
}
################################################################
# Segment to display if VPN is active
set_default POWERLEVEL9K_VPN_IP_INTERFACE "tun"
# prompt if vpn active
prompt_vpn_ip() {
_p9k_parse_ip $POWERLEVEL9K_VPN_IP_INTERFACE || return
"$1_prompt_segment" "$0" "$2" "cyan" "$DEFAULT_COLOR" 'VPN_ICON' 0 '' "${${_P9K_RETVAL//\%/%%}//\\/\\\\}"
}
################################################################
# Segment to display laravel version
prompt_laravel_version() {
local laravel_version="$(php artisan --version 2> /dev/null)"
if [[ -n "${laravel_version}" && "${laravel_version}" =~ "Laravel Framework" ]]; then
# Strip out everything but the version
laravel_version="${laravel_version//Laravel Framework /}"
"$1_prompt_segment" "$0" "$2" "maroon" "white" 'LARAVEL_ICON' 0 '' "${${laravel_version//\%/%%}//\\/\\\\}"
fi
}
################################################################
# Segment to display load
set_default -i POWERLEVEL9K_LOAD_WHICH 5
prompt_load() {
local bucket=2
case $POWERLEVEL9K_LOAD_WHICH in
1) bucket=1;;
5) bucket=2;;
15) bucket=3;;
esac
local load
case $OS in
OSX|BSD)
(( $+commands[sysctl] )) || return
load=$(command sysctl -n vm.loadavg 2>/dev/null) || return
load=${${(A)=load}[bucket+1]//,/.}
;;
*)
[[ -r /proc/loadavg ]] || return
_p9k_read_file /proc/loadavg || return
load=${${(A)=_P9K_RETVAL}[bucket]//,/.}
;;
esac
if (( ! $+_P9K_NUM_CPUS )); then
case $OS in
OSX) (( $+commands[sysctl] )) && _P9K_NUM_CPUS=$(command sysctl -n hw.logicalcpu 2>/dev/null) || return;;
BSD) (( $+commands[sysctl] )) && _P9K_NUM_CPUS=$(command sysctl -n hw.ncpu 2>/dev/null) || return;;
*) (( $+commands[nproc] )) && _P9K_NUM_CPUS=$(command nproc 2>/dev/null) || return;;
esac
fi
if (( load > 0.7 * _P9K_NUM_CPUS )); then
local state=critical bg=red
elif (( load > 0.5 * _P9K_NUM_CPUS )); then
local state=warning bg=yellow
else
local state=normal bg=green
fi
$1_prompt_segment $0_$state $2 $bg "$DEFAULT_COLOR" LOAD_ICON 0 '' $load
}
function _p9k_cached_cmd_stdout() {
local cmd=$commands[$1]
[[ -n $cmd ]] || return
shift
local -H stat
zstat -H stat -- $cmd 2>/dev/null || return
if ! _p9k_cache_get $0 $stat[inode] $stat[mtime] $stat[size] $stat[mode] $cmd "$@"; then
local out
out=$($cmd "$@" 2>/dev/null)
_p9k_cache_set $(( ! $? )) "$out"
fi
(( $_P9K_CACHE_VAL[1] )) || return
_P9K_RETVAL=$_P9K_CACHE_VAL[2]
}
function _p9k_cached_cmd_stdout_stderr() {
local cmd=$commands[$1]
[[ -n $cmd ]] || return
shift
local -H stat
zstat -H stat -- $cmd 2>/dev/null || return
if ! _p9k_cache_get $0 $stat[inode] $stat[mtime] $stat[size] $stat[mode] $cmd "$@"; then
local out
out=$($cmd "$@" 2>&1) # this line is the only diff with _p9k_cached_cmd_stdout
_p9k_cache_set $(( ! $? )) "$out"
fi
(( $_P9K_CACHE_VAL[1] )) || return
_P9K_RETVAL=$_P9K_CACHE_VAL[2]
}
################################################################
# Segment to diplay Node version
set_default P9K_NODE_VERSION_PROJECT_ONLY false
prompt_node_version() {
(( $+commands[node] )) || return
if [[ $P9K_NODE_VERSION_PROJECT_ONLY == true ]] ; then
local dir=$PWD
while true; do
[[ $dir == / ]] && return
[[ -e $dir/package.json ]] && break
dir=${dir:h}
done
fi
_p9k_cached_cmd_stdout node --version && [[ $_P9K_RETVAL == v?* ]] || return
"$1_prompt_segment" "$0" "$2" "green" "white" 'NODE_ICON' 0 '' "${_P9K_RETVAL#v}"
}
# Almost the same as `nvm_version default` but faster. The differences shouldn't affect
# the observable behavior of Powerlevel10k.
function _p9k_nvm_ls_default() {
local v=default
local -a seen=($v)
local target
while [[ -r $NVM_DIR/alias/$v ]] && read target <$NVM_DIR/alias/$v; do
[[ -n $target && ${seen[(I)$target]} == 0 ]] || return
seen+=$target
v=$target
done
case $v in
default|N/A)
return 1
;;
system|v)
_P9K_RETVAL=system
return
;;
iojs-[0-9]*)
v=iojs-v${v#iojs-}
;;
[0-9]*)
v=v$v
;;
esac
if [[ $v == v*.*.* ]]; then
if [[ -x $NVM_DIR/versions/node/$v/bin/node || -x $NVM_DIR/$v/bin/node ]]; then
_P9K_RETVAL=$v
return
elif [[ -x $NVM_DIR/versions/io.js/$v/bin/node ]]; then
_P9K_RETVAL=iojs-$v
return
else
return 1
fi
fi
local -a dirs=()
case $v in
node|node-|stable)
dirs=($NVM_DIR/versions/node $NVM_DIR)
v='(v[1-9]*|v0.*[02468].*)'
;;
unstable)
dirs=($NVM_DIR/versions/node $NVM_DIR)
v='v0.*[13579].*'
;;
iojs*)
dirs=($NVM_DIR/versions/io.js)
v=v${${${v#iojs}#-}#v}'*'
;;
*)
dirs=($NVM_DIR/versions/node $NVM_DIR $NVM_DIR/versions/io.js)
v=v${v#v}'*'
;;
esac
local -a matches=(${^dirs}/${~v}(/N))
(( $#matches )) || return
emulate -L zsh && setopt extendedglob
local max path
local -a match
for path in ${(Oa)matches}; do
[[ ${path:t} == (#b)v(*).(*).(*) ]] || continue
v=${(j::)${(@l:6::0:)match}}
[[ $v > $max ]] || continue
max=$v
_P9K_RETVAL=${path:t}
[[ ${path:h:t} != io.js ]] || _P9K_RETVAL=iojs-$_P9K_RETVAL
done
[[ -n $max ]]
}
# The same as `nvm_version current` but faster.
_p9k_nvm_ls_current() {
local node_path=${commands[node]:A}
[[ -n $node_path ]] || return
local nvm_dir=${NVM_DIR:A}
if [[ -n $nvm_dir && $node_path == $nvm_dir/versions/io.js/* ]]; then
_p9k_cached_cmd_stdout iojs --version || return
_P9K_RETVAL=iojs-v${_P9K_RETVAL#v}
elif [[ -n $nvm_dir && $node_path == $nvm_dir/* ]]; then
_p9k_cached_cmd_stdout node --version || return
_P9K_RETVAL=v${_P9K_RETVAL#v}
else
_P9K_RETVAL=system
fi
}
################################################################
# Segment to display Node version from NVM
# Only prints the segment if different than the default value
prompt_nvm() {
[[ -n $NVM_DIR ]] && _p9k_nvm_ls_current || return
local current=$_P9K_RETVAL
! _p9k_nvm_ls_default || [[ $_P9K_RETVAL != $current ]] || return
$1_prompt_segment "$0" "$2" "magenta" "black" 'NODE_ICON' 0 '' "${${${current#v}//\%/%%}//\\/\\\\}"
}
################################################################
# Segment to display NodeEnv
prompt_nodeenv() {
if [[ -n "$NODE_VIRTUAL_ENV" ]]; then
_p9k_cached_cmd_stdout node --version || return
local info="${_P9K_RETVAL}[${NODE_VIRTUAL_ENV:t}]"
"$1_prompt_segment" "$0" "$2" "black" "green" 'NODE_ICON' 0 '' "${${info//\%/%%}//\\/\\\\}"
fi
}
################################################################
# Segment to print a little OS icon
prompt_os_icon() {
"$1_prompt_segment" "$0" "$2" "black" "white" '' 0 '' "$OS_ICON"
}
################################################################
# Segment to display PHP version number
prompt_php_version() {
_p9k_cached_cmd_stdout php --version || return
emulate -L zsh && setopt extendedglob
local -a match
[[ $_P9K_RETVAL == (#b)(*$'\n')#(PHP [[:digit:].]##)* ]] || return
local v=$match[2]
"$1_prompt_segment" "$0" "$2" "fuchsia" "grey93" '' 0 '' "${${v//\%/%%}//\\/\\\\}"
}
################################################################
# Segment to display free RAM and used Swap
prompt_ram() {
local -F free_bytes
case $OS in
OSX)
(( $+commands[vm_stat] )) || return
local stat && stat=$(command vm_stat 2>/dev/null) || return
[[ $stat =~ 'Pages free:[[:space:]]+([0-9]+)' ]] || return
(( free_bytes+=match[1] ))
[[ $stat =~ 'Pages inactive:[[:space:]]+([0-9]+)' ]] || return
(( free_bytes+=match[1] ))
(( free_bytes *= 4096 ))
;;
BSD)
local stat && stat=$(command grep -F 'avail memory' /var/run/dmesg.boot 2>/dev/null) || return
free_bytes=${${(A)=stat}[4]}
;;
*)
local stat && stat=$(command grep -F MemAvailable /proc/meminfo 2>/dev/null) || return
free_bytes=$(( ${${(A)=stat}[2]} * 1024 ))
;;
esac
_p9k_human_readable_bytes $free_bytes
$1_prompt_segment $0 $2 yellow "$DEFAULT_COLOR" RAM_ICON 0 '' $_P9K_RETVAL
}
function _p9k_read_rbenv_version_file() {
[[ -r $1 ]] || return
local content
read -r content <$1 2>/dev/null
_P9K_RETVAL="${${(A)=content}[1]}"
[[ -n $_P9K_RETVAL ]]
}
function _p9k_rbenv_global_version() {
_p9k_read_rbenv_version_file ${RBENV_ROOT:-$HOME/.rbenv}/version || _P9K_RETVAL=system
}
################################################################
# Segment to display rbenv information
# https://github.com/rbenv/rbenv#choosing-the-ruby-version
set_default POWERLEVEL9K_RBENV_PROMPT_ALWAYS_SHOW false
prompt_rbenv() {
local v=$RBENV_VERSION
if [[ -z $v ]]; then
[[ $RBENV_DIR == /* ]] && local dir=$RBENV_DIR || local dir="$PWD/$RBENV_DIR"
while true; do
if _p9k_read_rbenv_version_file $dir/.ruby-version; then
v=$_P9K_RETVAL
break
fi
if [[ $dir == / ]]; then
[[ $POWERLEVEL9K_RBENV_PROMPT_ALWAYS_SHOW == true ]] || return
_p9k_rbenv_global_version
v=$_P9K_RETVAL
break
fi
dir=${dir:h}
done
fi
if [[ $POWERLEVEL9K_RBENV_PROMPT_ALWAYS_SHOW == false ]]; then
_p9k_rbenv_global_version
[[ $v == $_P9K_RETVAL ]] && return
fi
"$1_prompt_segment" "$0" "$2" "red" "$DEFAULT_COLOR" 'RUBY_ICON' 0 '' "${${v//\%/%%}//\\/\\\\}"
}
################################################################
# Segment to display chruby information
# see https://github.com/postmodern/chruby/issues/245 for chruby_auto issue with ZSH
set_default POWERLEVEL9K_CHRUBY_SHOW_VERSION true
set_default POWERLEVEL9K_CHRUBY_SHOW_ENGINE true
prompt_chruby() {
[[ -n $RUBY_ENGINE ]] || return
local v=''
[[ $POWERLEVEL9K_CHRUBY_SHOW_ENGINE == true ]] && v=$RUBY_ENGINE
if [[ $POWERLEVEL9K_CHRUBY_SHOW_VERSION == true && -n $RUBY_VERSION ]] && v+=${v:+ }$RUBY_VERSION
"$1_prompt_segment" "$0" "$2" "red" "$DEFAULT_COLOR" 'RUBY_ICON' 0 '' "${${v//\%/%%}//\\/\\\\}"
}
################################################################
# Segment to print an icon if user is root.
prompt_root_indicator() {
"$1_prompt_segment" "$0" "$2" "$DEFAULT_COLOR" "yellow" 'ROOT_ICON' 0 '${${(%):-%#}:#%}' ''
}
# This segment is a demo. It can disappear any time. Use prompt_dir instead.
prompt_simple_dir() {
if ! _p9k_cache_get "$0" "$1" "$2" ; then
local p=$_P9K_PROMPT
local key=$_P9K_CACHE_KEY
_P9K_PROMPT=''
$1_prompt_segment $0_HOME $2 blue "$DEFAULT_COLOR" HOME_ICON 0 '${$((!${#${(%):-%~}:#\~})):#0}' "%~"
$1_prompt_segment $0_HOME_SUBFOLDER $2 blue "$DEFAULT_COLOR" HOME_SUB_ICON 0 '${$((!${#${(%):-%~}:#\~?*})):#0}' "%~"
$1_prompt_segment $0_ETC $2 blue "$DEFAULT_COLOR" ETC_ICON 0 '${$((!${#${(%):-%~}:#/etc*})):#0}' "%~"
$1_prompt_segment $0_DEFAULT $2 blue "$DEFAULT_COLOR" FOLDER_ICON 0 '${${${(%):-%~}:#\~*}:#/etc*}' "%~"
_P9K_CACHE_KEY=$key
_p9k_cache_set "$_P9K_PROMPT"
_P9K_PROMPT=$p
fi
_P9K_PROMPT+=${_P9K_CACHE_VAL[1]}
}
################################################################
# Segment to display Rust version number
prompt_rust_version() {
_p9k_cached_cmd_stdout rustc --version || return
local v=${${_P9K_RETVAL#rustc }%% *}
[[ -n $v ]] || return
"$1_prompt_segment" "$0" "$2" "darkorange" "$DEFAULT_COLOR" 'RUST_ICON' 0 '' "${${v//\%/%%}//\\/\\\\}"
}
# RSpec test ratio
prompt_rspec_stats() {
if [[ -d app && -d spec ]]; then
local -a code=(app/**/*.rb(N))
(( $#code )) || return
local tests=(spec/**/*.rb(N))
build_test_stats "$1" "$0" "$2" "$#code" "$#tests" "RSpec" 'TEST_ICON'
fi
}
################################################################
# Segment to display Ruby Version Manager information
prompt_rvm() {
if [ $commands[rvm-prompt] ]; then
local version_and_gemset=${$(rvm-prompt v p)/ruby-}
if [[ -n "$version_and_gemset" ]]; then
"$1_prompt_segment" "$0" "$2" "240" "$DEFAULT_COLOR" 'RUBY_ICON' 0 '' "${${version_and_gemset//\%/%%}//\\/\\\\}"
fi
fi
}
################################################################
# Segment to display SSH icon when connected
prompt_ssh() {
if [[ -n "$SSH_CLIENT" || -n "$SSH_TTY" ]]; then
"$1_prompt_segment" "$0" "$2" "$DEFAULT_COLOR" "yellow" 'SSH_ICON' 0 '' ''
fi
}
################################################################
# Status: When an error occur, return the error code, or a cross icon if option is set
# Display an ok icon when no error occur, or hide the segment if option is set to false
#
set_default POWERLEVEL9K_STATUS_CROSS false
set_default POWERLEVEL9K_STATUS_OK true
set_default POWERLEVEL9K_STATUS_SHOW_PIPESTATUS true
set_default POWERLEVEL9K_STATUS_HIDE_SIGNAME false
# old options, retro compatibility
set_default POWERLEVEL9K_STATUS_VERBOSE true
set_default POWERLEVEL9K_STATUS_OK_IN_NON_VERBOSE false
exit_code_or_status() {
local ec=$1
if [[ "$POWERLEVEL9K_STATUS_HIDE_SIGNAME" = true ]] || (( ec <= 128 )); then
_P9K_RETVAL=$ec
else
_P9K_RETVAL="SIG${signals[$((ec - 127))]}($((ec - 128)))"
fi
}
typeset -gi _P9K_EXIT_CODE
typeset -ga _P9K_PIPE_EXIT_CODES
prompt_status() {
if ! _p9k_cache_get "$0" "$2" "$_P9K_EXIT_CODE" "${(@)_P9K_PIPE_EXIT_CODES}"; then
local ec_text
local ec_sum
local ec
if [[ $POWERLEVEL9K_STATUS_SHOW_PIPESTATUS == true ]]; then
if (( $#_P9K_PIPE_EXIT_CODES > 1 )); then
ec_sum=${_P9K_PIPE_EXIT_CODES[1]}
exit_code_or_status "${_P9K_PIPE_EXIT_CODES[1]}"
else
ec_sum=${_P9K_EXIT_CODE}
exit_code_or_status "${_P9K_EXIT_CODE}"
fi
ec_text=$_P9K_RETVAL
for ec in "${(@)_P9K_PIPE_EXIT_CODES[2,-1]}"; do
(( ec_sum += ec ))
exit_code_or_status "$ec"
ec_text+="|$_P9K_RETVAL"
done
else
ec_sum=${_P9K_EXIT_CODE}
# We use _P9K_EXIT_CODE instead of the right-most _P9K_PIPE_EXIT_CODES item because
# PIPE_FAIL may be set.
exit_code_or_status "${_P9K_EXIT_CODE}"
ec_text=$_P9K_RETVAL
fi
if (( ec_sum > 0 )); then
if [[ "$POWERLEVEL9K_STATUS_CROSS" == false && "$POWERLEVEL9K_STATUS_VERBOSE" == true ]]; then
_P9K_CACHE_VAL=("$0_ERROR" "$2" red yellow1 CARRIAGE_RETURN_ICON 0 '' "$ec_text")
else
_P9K_CACHE_VAL=("$0_ERROR" "$2" "$DEFAULT_COLOR" red FAIL_ICON 0 '' '')
fi
elif [[ "$POWERLEVEL9K_STATUS_OK" == true ]] && [[ "$POWERLEVEL9K_STATUS_VERBOSE" == true || "$POWERLEVEL9K_STATUS_OK_IN_NON_VERBOSE" == true ]]; then
_P9K_CACHE_VAL=("$0_OK" "$2" "$DEFAULT_COLOR" green OK_ICON 0 '' '')
else
return
fi
if (( $#_P9K_PIPE_EXIT_CODES < 3 )); then
_p9k_cache_set "${(@)_P9K_CACHE_VAL}"
fi
fi
"$1_prompt_segment" "${(@)_P9K_CACHE_VAL}"
}
################################################################
# Segment to display Swap information
prompt_swap() {
local -F used_bytes
if [[ "$OS" == "OSX" ]]; then
(( $+commands[sysctl] )) || return
[[ "$(command sysctl vm.swapusage 2>/dev/null)" =~ "used = ([0-9,.]+)([A-Z]+)" ]] || return
used_bytes=${match[1]//,/.}
case ${match[2]} in
'K') (( used_bytes *= 1024 ));;
'M') (( used_bytes *= 1048576 ));;
'G') (( used_bytes *= 1073741824 ));;
'T') (( used_bytes *= 1099511627776 ));;
*) return;;
esac
else
local meminfo && meminfo=$(command grep -F 'Swap' /proc/meminfo 2>/dev/null) || return
[[ $meminfo =~ 'SwapTotal:[[:space:]]+([0-9]+)' ]] || return
(( used_bytes+=match[1] ))
[[ $meminfo =~ 'SwapFree:[[:space:]]+([0-9]+)' ]] || return
(( used_bytes-=match[1] ))
(( used_bytes *= 1024 ))
fi
_p9k_human_readable_bytes $used_bytes
$1_prompt_segment $0 $2 yellow "$DEFAULT_COLOR" SWAP_ICON 0 '' $_P9K_RETVAL
}
################################################################
# Symfony2-PHPUnit test ratio
prompt_symfony2_tests() {
if [[ -d src && -d app && -f app/AppKernel.php ]]; then
local -a all=(src/**/*.php(N))
local -a code=(${(@)all##*Tests*})
(( $#code )) || return
build_test_stats "$1" "$0" "$2" "$#code" "$(($#all - $#code))" "SF2" 'TEST_ICON'
fi
}
################################################################
# Segment to display Symfony2-Version
prompt_symfony2_version() {
if [[ -r app/bootstrap.php.cache ]]; then
local v="${$(command grep -F " VERSION " app/bootstrap.php.cache 2>/dev/null)//[![:digit:].]}"
"$1_prompt_segment" "$0" "$2" "grey35" "$DEFAULT_COLOR" 'SYMFONY_ICON' 0 '' "${${v//\%/%%}//\\/\\\\}"
fi
}
################################################################
# Show a ratio of tests vs code
build_test_stats() {
local code_amount="$4"
local tests_amount="$5"
local headline="$6"
(( code_amount > 0 )) || return
local -F 2 ratio=$(( 100. * tests_amount / code_amount ))
(( ratio >= 75 )) && "$1_prompt_segment" "${2}_GOOD" "$3" "cyan" "$DEFAULT_COLOR" "$6" 0 '' "$headline: $ratio%%"
(( ratio >= 50 && ratio < 75 )) && "$1_prompt_segment" "$2_AVG" "$3" "yellow" "$DEFAULT_COLOR" "$6" 0 '' "$headline: $ratio%%"
(( ratio < 50 )) && "$1_prompt_segment" "$2_BAD" "$3" "red" "$DEFAULT_COLOR" "$6" 0 '' "$headline: $ratio%%"
}
################################################################
# System time
# If set to true, `time` prompt will update every second.
set_default POWERLEVEL9K_EXPERIMENTAL_TIME_REALTIME false
set_default POWERLEVEL9K_TIME_FORMAT "%D{%H:%M:%S}"
prompt_time() {
local t=$POWERLEVEL9K_TIME_FORMAT
[[ $POWERLEVEL9K_EXPERIMENTAL_TIME_REALTIME == true ]] || t=${(%)t}
"$1_prompt_segment" "$0" "$2" "$DEFAULT_COLOR_INVERTED" "$DEFAULT_COLOR" "TIME_ICON" 0 '' "${${t//\%/%%}//\\/\\\\}"
}
################################################################
# System date
set_default POWERLEVEL9K_DATE_FORMAT "%D{%d.%m.%y}"
prompt_date() {
local d=$POWERLEVEL9K_DATE_FORMAT
[[ $POWERLEVEL9K_EXPERIMENTAL_TIME_REALTIME == true ]] || d=${(%)d}
"$1_prompt_segment" "$0" "$2" "$DEFAULT_COLOR_INVERTED" "$DEFAULT_COLOR" "DATE_ICON" 0 '' "${${d//\%/%%}//\\/\\\\}"
}
################################################################
# todo.sh: shows the number of tasks in your todo.sh file
prompt_todo() {
local todo=$commands[todo.sh]
[[ -n $todo ]] || return
if (( ! $+_P9K_TODO_FILE )); then
local bash=${commands[bash]:-:}
typeset -g _P9K_TODO_FILE=$($bash 2>/dev/null -c "
[ -e \"\$TODOTXT_CFG_FILE\" ] || TODOTXT_CFG_FILE=\$HOME/.todo/config
[ -e \"\$TODOTXT_CFG_FILE\" ] || TODOTXT_CFG_FILE=\$HOME/todo.cfg
[ -e \"\$TODOTXT_CFG_FILE\" ] || TODOTXT_CFG_FILE=\$HOME/.todo.cfg
[ -e \"\$TODOTXT_CFG_FILE\" ] || TODOTXT_CFG_FILE=\${XDG_CONFIG_HOME:-\$HOME/.config}/todo/config
[ -e \"\$TODOTXT_CFG_FILE\" ] || TODOTXT_CFG_FILE=${(qqq)todo:h}/todo.cfg
[ -e \"\$TODOTXT_CFG_FILE\" ] || TODOTXT_CFG_FILE=\${TODOTXT_GLOBAL_CFG_FILE:-/etc/todo/config}
[ -r \"\$TODOTXT_CFG_FILE\" ] || exit
source \"\$TODOTXT_CFG_FILE\" &>/dev/null
echo \"\$TODO_FILE\"")
fi
[[ -r $_P9K_TODO_FILE ]] || return
local -H stat
zstat -H stat -- $_P9K_TODO_FILE 2>/dev/null || return
if ! _p9k_cache_get $0 $stat[inode] $stat[mtime] $stat[size]; then
local count=$($todo -p ls | command tail -1)
emulate -L zsh && setopt extendedglob
if [[ $count == (#b)'TODO: '[[:digit:]]##' of '([[:digit:]]##)' '* ]]; then
_p9k_cache_set 1 $match[1]
else
_p9k_cache_set 0 0
fi
fi
(( $_P9K_CACHE_VAL[1] )) || return
"$1_prompt_segment" "$0" "$2" "grey50" "$DEFAULT_COLOR" 'TODO_ICON' 0 '' "${_P9K_CACHE_VAL[2]}"
}
################################################################
# VCS segment: shows the state of your repository, if you are in a folder under
# version control
# The vcs segment can have 4 different states - defaults to 'clean'.
typeset -gA vcs_states=(
'clean' 'green'
'modified' 'yellow'
'untracked' 'green'
'loading' 'grey'
)
set_default POWERLEVEL9K_VCS_ACTIONFORMAT_FOREGROUND red
set_default POWERLEVEL9K_SHOW_CHANGESET false
set_default POWERLEVEL9K_VCS_LOADING_TEXT loading
set_default -i POWERLEVEL9K_VCS_INTERNAL_HASH_LENGTH 8
set_default -a POWERLEVEL9K_VCS_GIT_HOOKS vcs-detect-changes git-untracked git-aheadbehind git-stash git-remotebranch git-tagname
set_default -a POWERLEVEL9K_VCS_HG_HOOKS vcs-detect-changes
set_default -a POWERLEVEL9K_VCS_SVN_HOOKS vcs-detect-changes svn-detect-changes
# If it takes longer than this to fetch git repo status, display the prompt with a greyed out
# vcs segment and fix it asynchronously when the results come it.
set_default -F POWERLEVEL9K_VCS_MAX_SYNC_LATENCY_SECONDS 0.05
set_default -a POWERLEVEL9K_VCS_BACKENDS git
powerlevel9k_vcs_init() {
if [[ -n "$POWERLEVEL9K_CHANGESET_HASH_LENGTH" ]]; then
POWERLEVEL9K_VCS_INTERNAL_HASH_LENGTH="$POWERLEVEL9K_CHANGESET_HASH_LENGTH"
fi
local component state
for component in REMOTE_URL COMMIT BRANCH TAG REMOTE_BRANCH STAGED UNSTAGED UNTRACKED \
OUTGOING_CHANGES INCOMING_CHANGES STASH ACTION; do
local color=${(P)${:-POWERLEVEL9K_VCS_${component}FORMAT_FOREGROUND}}
if [[ -n $color ]]; then
for state in "${(@k)vcs_states}"; do
local var=POWERLEVEL9K_VCS_${(U)state}_${component}FORMAT_FOREGROUND
if [[ -z ${(P)var} ]]; then
typeset -g $var=$color
fi
done
fi
done
autoload -Uz vcs_info
VCS_CHANGESET_PREFIX=''
if [[ "$POWERLEVEL9K_SHOW_CHANGESET" == true ]]; then
VCS_CHANGESET_PREFIX="$(print_icon 'VCS_COMMIT_ICON')%0.$POWERLEVEL9K_VCS_INTERNAL_HASH_LENGTH""i "
fi
zstyle ':vcs_info:*' check-for-changes true
VCS_DEFAULT_FORMAT="$VCS_CHANGESET_PREFIX%b%c%u%m"
zstyle ':vcs_info:*' formats "$VCS_DEFAULT_FORMAT"
zstyle ':vcs_info:*' actionformats "%b %F{${POWERLEVEL9K_VCS_ACTIONFORMAT_FOREGROUND}}| %a%f"
zstyle ':vcs_info:*' stagedstr " $(print_icon 'VCS_STAGED_ICON')"
zstyle ':vcs_info:*' unstagedstr " $(print_icon 'VCS_UNSTAGED_ICON')"
zstyle ':vcs_info:git*+set-message:*' hooks $POWERLEVEL9K_VCS_GIT_HOOKS
zstyle ':vcs_info:hg*+set-message:*' hooks $POWERLEVEL9K_VCS_HG_HOOKS
zstyle ':vcs_info:svn*+set-message:*' hooks $POWERLEVEL9K_VCS_SVN_HOOKS
# For Hg, only show the branch name
zstyle ':vcs_info:hg*:*' branchformat "$(print_icon 'VCS_BRANCH_ICON')%b"
# The `get-revision` function must be turned on for dirty-check to work for Hg
zstyle ':vcs_info:hg*:*' get-revision true
zstyle ':vcs_info:hg*:*' get-bookmarks true
zstyle ':vcs_info:hg*+gen-hg-bookmark-string:*' hooks hg-bookmarks
# TODO: fix the %b (branch) format for svn. Using %b breaks color-encoding of the foreground
# for the rest of the powerline.
zstyle ':vcs_info:svn*:*' formats "$VCS_CHANGESET_PREFIX%c%u"
zstyle ':vcs_info:svn*:*' actionformats "$VCS_CHANGESET_PREFIX%c%u %F{${POWERLEVEL9K_VCS_ACTIONFORMAT_FOREGROUND}}| %a%f"
if [[ "$POWERLEVEL9K_SHOW_CHANGESET" == true ]]; then
zstyle ':vcs_info:*' get-revision true
fi
}
# git workdir => the last prompt we've shown for it
typeset -gAH _P9K_LAST_GIT_PROMPT
# git workdir => 1 if gitstatus is slow on it, 0 if it's fast.
typeset -gAH _P9K_GIT_SLOW
function _p9k_vcs_style() {
local color=${(P)${:-POWERLEVEL9K_VCS_${1}_${2}FORMAT_FOREGROUND}}
if [[ -z $color ]]; then
_P9K_RETVAL=""
return
fi
if [[ $color != <-> ]]; then
color=$__P9K_COLORS[${${${color#bg-}#fg-}#br}]
if [[ -z $color ]]; then
_P9K_RETVAL=""
return
fi
fi
_P9K_RETVAL="%F{$color}"
}
function _p9k_vcs_render() {
if (( $+_P9K_NEXT_VCS_DIR )); then
local -a msg
local dir=${${GIT_DIR:a}:-$PWD}
while true; do
msg=("${(@0)${_P9K_LAST_GIT_PROMPT[$dir]}}")
[[ $#msg -gt 1 || -n ${msg[1]} ]] && break
[[ $dir == / ]] && msg=() && break
dir=${dir:h}
done
if (( $#msg )); then
$2_prompt_segment $1_LOADING $3 "${vcs_states[loading]}" "$DEFAULT_COLOR" '' 0 '' "${msg[@]}"
else
_p9k_get_icon VCS_LOADING_ICON
if [[ -n $_P9K_RETVAL || -n $POWERLEVEL9K_VCS_LOADING_TEXT ]]; then
$2_prompt_segment $1_LOADING $3 "${vcs_states[loading]}" "$DEFAULT_COLOR" VCS_LOADING_ICON 0 '' "$POWERLEVEL9K_VCS_LOADING_TEXT"
fi
fi
return 0
fi
[[ $VCS_STATUS_RESULT == ok-* ]] || return 1
(( ${POWERLEVEL9K_VCS_GIT_HOOKS[(I)git-untracked]} )) || VCS_STATUS_HAS_UNTRACKED=0
(( ${POWERLEVEL9K_VCS_GIT_HOOKS[(I)git-aheadbehind]} )) || { VCS_STATUS_COMMITS_AHEAD=0 && VCS_STATUS_COMMITS_BEHIND=0 }
(( ${POWERLEVEL9K_VCS_GIT_HOOKS[(I)git-stash]} )) || VCS_STATUS_STASHES=0
(( ${POWERLEVEL9K_VCS_GIT_HOOKS[(I)git-remotebranch]} )) || VCS_STATUS_REMOTE_BRANCH=""
(( ${POWERLEVEL9K_VCS_GIT_HOOKS[(I)git-tagname]} )) || VCS_STATUS_TAG=""
(( POWERLEVEL9K_VCS_COMMITS_AHEAD_MAX_NUM >= 0 && VCS_STATUS_COMMITS_AHEAD > POWERLEVEL9K_VCS_COMMITS_AHEAD_MAX_NUM )) &&
VCS_STATUS_COMMITS_AHEAD=$POWERLEVEL9K_VCS_COMMITS_AHEAD_MAX_NUM
(( POWERLEVEL9K_VCS_COMMITS_BEHIND_MAX_NUM >= 0 && VCS_STATUS_COMMITS_BEHIND > POWERLEVEL9K_VCS_COMMITS_BEHIND_MAX_NUM )) &&
VCS_STATUS_COMMITS_BEHIND=$POWERLEVEL9K_VCS_COMMITS_BEHIND_MAX_NUM
local -a cache_key=(
"$VCS_STATUS_LOCAL_BRANCH"
"$VCS_STATUS_REMOTE_BRANCH"
"$VCS_STATUS_REMOTE_URL"
"$VCS_STATUS_ACTION"
"$VCS_STATUS_NUM_STAGED"
"$VCS_STATUS_NUM_UNSTAGED"
"$VCS_STATUS_NUM_UNTRACKED"
"$VCS_STATUS_HAS_STAGED"
"$VCS_STATUS_HAS_UNSTAGED"
"$VCS_STATUS_HAS_UNTRACKED"
"$VCS_STATUS_COMMITS_AHEAD"
"$VCS_STATUS_COMMITS_BEHIND"
"$VCS_STATUS_STASHES"
"$VCS_STATUS_TAG"
)
if [[ $POWERLEVEL9K_SHOW_CHANGESET == true || -z $VCS_STATUS_LOCAL_BRANCH ]]; then
cache_key+=$VCS_STATUS_COMMIT
fi
if ! _p9k_cache_get "${(@)cache_key}"; then
local state=CLEAN
local -a cur_prompt
local -a stale_prompt
function _$0_fmt() {
_p9k_vcs_style $state $1
cur_prompt+=$_P9K_RETVAL$2
_p9k_vcs_style LOADING $1
stale_prompt+=$_P9K_RETVAL$2
}
trap "unfunction _$0_fmt" EXIT
if (( ${POWERLEVEL9K_VCS_GIT_HOOKS[(I)vcs-detect-changes]} )); then
if [[ $VCS_STATUS_HAS_STAGED != 0 || $VCS_STATUS_HAS_UNSTAGED != 0 ]]; then
state=MODIFIED
elif [[ $VCS_STATUS_HAS_UNTRACKED != 0 ]]; then
state=UNTRACKED
fi
# It's weird that removing vcs-detect-changes from POWERLEVEL9K_VCS_GIT_HOOKS gets rid
# of the GIT icon. That's what vcs_info does, so we do the same in the name of compatiblity.
if [[ "$VCS_STATUS_REMOTE_URL" == *github* ]] then
_p9k_get_icon VCS_GIT_GITHUB_ICON
_$0_fmt REMOTE_URL $_P9K_RETVAL
elif [[ "$VCS_STATUS_REMOTE_URL" == *bitbucket* ]] then
_p9k_get_icon VCS_GIT_BITBUCKET_ICON
_$0_fmt REMOTE_URL $_P9K_RETVAL
elif [[ "$VCS_STATUS_REMOTE_URL" == *stash* ]] then
_p9k_get_icon VCS_GIT_GITHUB_ICON
_$0_fmt REMOTE_URL $_P9K_RETVAL
elif [[ "$VCS_STATUS_REMOTE_URL" == *gitlab* ]] then
_p9k_get_icon VCS_GIT_GITLAB_ICON
_$0_fmt REMOTE_URL $_P9K_RETVAL
else
_p9k_get_icon VCS_GIT_ICON
_$0_fmt REMOTE_URL $_P9K_RETVAL
fi
fi
local ws
if [[ $POWERLEVEL9K_SHOW_CHANGESET == true || -z $VCS_STATUS_LOCAL_BRANCH ]]; then
_p9k_get_icon VCS_COMMIT_ICON
_$0_fmt COMMIT "$_P9K_RETVAL${${VCS_STATUS_COMMIT:0:$POWERLEVEL9K_VCS_INTERNAL_HASH_LENGTH}:-HEAD}"
ws=' '
fi
if [[ -n $VCS_STATUS_LOCAL_BRANCH ]]; then
_p9k_get_icon VCS_BRANCH_ICON
_$0_fmt BRANCH "$ws$_P9K_RETVAL${${VCS_STATUS_LOCAL_BRANCH//\%/%%}//\\/\\\\}"
fi
if [[ $POWERLEVEL9K_VCS_HIDE_TAGS == false && -n $VCS_STATUS_TAG ]]; then
_p9k_get_icon VCS_TAG_ICON
_$0_fmt TAG " $_P9K_RETVAL${${VCS_STATUS_TAG//\%/%%}//\\/\\\\}"
fi
if [[ -n $VCS_STATUS_ACTION ]]; then
_$0_fmt ACTION " | ${${VCS_STATUS_ACTION//\%/%%}//\\/\\\\}"
else
if [[ -n $VCS_STATUS_REMOTE_BRANCH &&
$VCS_STATUS_LOCAL_BRANCH != $VCS_STATUS_REMOTE_BRANCH ]]; then
_p9k_get_icon VCS_REMOTE_BRANCH_ICON
_$0_fmt REMOTE_BRANCH " $_P9K_RETVAL${${VCS_STATUS_REMOTE_BRANCH//\%/%%}//\\/\\\\}"
fi
if [[ $VCS_STATUS_HAS_STAGED == 1 ]]; then
_p9k_get_icon VCS_STAGED_ICON
(( ${POWERLEVEL9K_VCS_MAX_NUM_STAGED:-$POWERLEVEL9K_VCS_STAGED_MAX_NUM} != 1 )) && _P9K_RETVAL+=$VCS_STATUS_NUM_STAGED
_$0_fmt STAGED " $_P9K_RETVAL"
fi
if [[ $VCS_STATUS_HAS_UNSTAGED == 1 ]]; then
_p9k_get_icon VCS_UNSTAGED_ICON
(( ${POWERLEVEL9K_VCS_MAX_NUM_UNSTAGED:-$POWERLEVEL9K_VCS_UNSTAGED_MAX_NUM} != 1 )) && _P9K_RETVAL+=$VCS_STATUS_NUM_UNSTAGED
_$0_fmt UNSTAGED " $_P9K_RETVAL"
fi
if [[ $VCS_STATUS_HAS_UNTRACKED == 1 ]]; then
_p9k_get_icon VCS_UNTRACKED_ICON
(( ${POWERLEVEL9K_VCS_MAX_NUM_UNTRACKED:-$POWERLEVEL9K_VCS_UNTRACKED_MAX_NUM} != 1 )) && _P9K_RETVAL+=$VCS_STATUS_NUM_UNTRACKED
_$0_fmt UNTRACKED " $_P9K_RETVAL"
fi
if [[ $VCS_STATUS_COMMITS_BEHIND -gt 0 ]]; then
_p9k_get_icon VCS_INCOMING_CHANGES_ICON
(( POWERLEVEL9K_VCS_COMMITS_BEHIND_MAX_NUM != 1 )) && _P9K_RETVAL+=$VCS_STATUS_COMMITS_BEHIND
_$0_fmt INCOMING_CHANGES " $_P9K_RETVAL"
fi
if [[ $VCS_STATUS_COMMITS_AHEAD -gt 0 ]]; then
_p9k_get_icon VCS_OUTGOING_CHANGES_ICON
(( POWERLEVEL9K_VCS_COMMITS_AHEAD_MAX_NUM != 1 )) && _P9K_RETVAL+=$VCS_STATUS_COMMITS_AHEAD
_$0_fmt OUTGOING_CHANGES " $_P9K_RETVAL"
fi
if [[ $VCS_STATUS_STASHES -gt 0 ]]; then
_p9k_get_icon VCS_STASH_ICON
_$0_fmt STASH " $_P9K_RETVAL$VCS_STATUS_STASHES"
fi
fi
_p9k_cache_set "${1}_$state" "${vcs_states[${(L)state}]}" "${stale_prompt[@]}" "${cur_prompt[@]}"
fi
local id=${_P9K_CACHE_VAL[1]}
local bg=${_P9K_CACHE_VAL[2]}
shift 2 _P9K_CACHE_VAL
local -i n=$(($#_P9K_CACHE_VAL / 2))
_P9K_LAST_GIT_PROMPT[$VCS_STATUS_WORKDIR]="${(pj:\0:)_P9K_CACHE_VAL[1,$n]}"
shift $n _P9K_CACHE_VAL
$2_prompt_segment "$id" "$3" "$bg" "$DEFAULT_COLOR" '' 0 '' "${(@)_P9K_CACHE_VAL}"
return 0
}
function _p9k_vcs_resume() {
emulate -L zsh
if [[ $VCS_STATUS_RESULT == ok-async ]]; then
local latency=$((EPOCHREALTIME - _P9K_GITSTATUS_START_TIME))
if (( latency > POWERLEVEL9K_VCS_MAX_SYNC_LATENCY_SECONDS )); then
_P9K_GIT_SLOW[$VCS_STATUS_WORKDIR]=1
elif (( latency < 0.8 * POWERLEVEL9K_VCS_MAX_SYNC_LATENCY_SECONDS )); then # 0.8 to avoid flip-flopping
_P9K_GIT_SLOW[$VCS_STATUS_WORKDIR]=0
fi
fi
if [[ -z $_P9K_NEXT_VCS_DIR ]]; then
unset _P9K_NEXT_VCS_DIR
_p9k_update_prompt gitstatus
else
typeset -gFH _P9K_GITSTATUS_START_TIME=$EPOCHREALTIME
if ! gitstatus_query -d $_P9K_NEXT_VCS_DIR -t 0 -c _p9k_vcs_resume POWERLEVEL9K; then
unset _P9K_NEXT_VCS_DIR
return
fi
case $VCS_STATUS_RESULT in
*-sync)
unset _P9K_NEXT_VCS_DIR
_p9k_update_prompt gitstatus
;;
tout)
typeset -gH _P9K_NEXT_VCS_DIR=""
;;
esac
fi
}
function _p9k_vcs_gitstatus() {
[[ $POWERLEVEL9K_DISABLE_GITSTATUS == true ]] && return 1
if [[ $_P9K_REFRESH_REASON == precmd ]]; then
if (( $+_P9K_NEXT_VCS_DIR )); then
typeset -gH _P9K_NEXT_VCS_DIR=${${GIT_DIR:a}:-$PWD}
else
local dir=${${GIT_DIR:a}:-$PWD}
local -F timeout=$POWERLEVEL9K_VCS_MAX_SYNC_LATENCY_SECONDS
while true; do
case "$_P9K_GIT_SLOW[$dir]" in
"") [[ $dir == / ]] && break; dir=${dir:h};;
0) break;;
1) timeout=0; break;;
esac
done
typeset -gFH _P9K_GITSTATUS_START_TIME=$EPOCHREALTIME
gitstatus_query -d ${${GIT_DIR:a}:-$PWD} -t $timeout -c _p9k_vcs_resume POWERLEVEL9K || return 1
[[ $VCS_STATUS_RESULT == tout ]] && typeset -gH _P9K_NEXT_VCS_DIR=""
fi
fi
return 0
}
################################################################
# Segment to show VCS information
prompt_vcs() {
local -a backends=($POWERLEVEL9K_VCS_BACKENDS)
if (( ${backends[(I)git]} )) && _p9k_vcs_gitstatus; then
_p9k_vcs_render $0 $1 $2 && return
backends=(${backends:#git})
fi
if (( $#backends )); then
VCS_WORKDIR_DIRTY=false
VCS_WORKDIR_HALF_DIRTY=false
local current_state=""
# Actually invoke vcs_info manually to gather all information.
zstyle ':vcs_info:*' enable ${backends}
vcs_info
local vcs_prompt="${vcs_info_msg_0_}"
if [[ -n "$vcs_prompt" ]]; then
if [[ "$VCS_WORKDIR_DIRTY" == true ]]; then
# $vcs_visual_identifier gets set in +vi-vcs-detect-changes in functions/vcs.zsh,
# as we have there access to vcs_info internal hooks.
current_state='modified'
else
if [[ "$VCS_WORKDIR_HALF_DIRTY" == true ]]; then
current_state='untracked'
else
current_state='clean'
fi
fi
$1_prompt_segment "${0}_${(U)current_state}" "$2" "${vcs_states[$current_state]}" "$DEFAULT_COLOR" "$vcs_visual_identifier" 0 '' "$vcs_prompt"
fi
fi
}
################################################################
# Vi Mode: show editing mode (NORMAL|INSERT|VISUAL)
#
# VISUAL mode is shown as NORMAL unless POWERLEVEL9K_VI_VISUAL_MODE_STRING is explicitly set.
# Your ZSH version must be >= 5.3 if you set this parameter.
set_default POWERLEVEL9K_VI_INSERT_MODE_STRING "INSERT"
set_default POWERLEVEL9K_VI_COMMAND_MODE_STRING "NORMAL"
prompt_vi_mode() {
$1_prompt_segment $0_NORMAL $2 "$DEFAULT_COLOR" white '' 0 '${$((!${#${:-$KEYMAP$_P9K_REGION_ACTIVE}:#vicmd0})):#0}' "$POWERLEVEL9K_VI_COMMAND_MODE_STRING"
$1_prompt_segment $0_VISUAL $2 "$DEFAULT_COLOR" white '' 0 '${$((!${#${:-$KEYMAP$_P9K_REGION_ACTIVE}:#vicmd1})):#0}' "$POWERLEVEL9K_VI_VISUAL_MODE_STRING"
if [[ -n $POWERLEVEL9K_VI_INSERT_MODE_STRING ]]; then
$1_prompt_segment $0_INSERT $2 "$DEFAULT_COLOR" blue '' 0 '${${KEYMAP:-0}:#vicmd}' "$POWERLEVEL9K_VI_INSERT_MODE_STRING"
fi
}
################################################################
# Virtualenv: current working virtualenv
# More information on virtualenv (Python):
# https://virtualenv.pypa.io/en/latest/
prompt_virtualenv() {
if [[ -n "$VIRTUAL_ENV" ]]; then
"$1_prompt_segment" "$0" "$2" "blue" "$DEFAULT_COLOR" 'PYTHON_ICON' 0 '' "${${${VIRTUAL_ENV:t}//\%/%%}//\\/\\\\}"
fi
}
function _p9k_read_pyenv_version_file() {
[[ -r $1 ]] || return
local content
read -rd $'\0' content <$1 2>/dev/null
_P9K_RETVAL=${${(j.:.)${(@)${=content}#python-}:-system}}
}
function _p9k_pyenv_global_version() {
_p9k_read_pyenv_version_file ${PYENV_ROOT:-$HOME/.pyenv}/version || _P9K_RETVAL=system
}
################################################################
# Segment to display pyenv information
# https://github.com/pyenv/pyenv#choosing-the-python-version
set_default POWERLEVEL9K_PYENV_PROMPT_ALWAYS_SHOW false
prompt_pyenv() {
local v=${(j.:.)${(@)${(s.:.)PYENV_VERSION}#python-}}
if [[ -z $v ]]; then
[[ $PYENV_DIR == /* ]] && local dir=$PYENV_DIR || local dir="$PWD/$PYENV_DIR"
while true; do
if _p9k_read_pyenv_version_file $dir/.python-version; then
v=$_P9K_RETVAL
break
fi
if [[ $dir == / ]]; then
[[ $POWERLEVEL9K_PYENV_PROMPT_ALWAYS_SHOW == true ]] || return
_p9k_pyenv_global_version
v=$_P9K_RETVAL
break
fi
dir=${dir:h}
done
fi
if [[ $POWERLEVEL9K_PYENV_PROMPT_ALWAYS_SHOW == false ]]; then
_p9k_pyenv_global_version
[[ $v == $_P9K_RETVAL ]] && return
fi
"$1_prompt_segment" "$0" "$2" "blue" "$DEFAULT_COLOR" 'PYTHON_ICON' 0 '' "${${v//\%/%%}//\\/\\\\}"
}
################################################################
# Display openfoam information
prompt_openfoam() {
local wm_project_version="$WM_PROJECT_VERSION"
local wm_fork="$WM_FORK"
if [[ -n "$wm_project_version" && -z "$wm_fork" ]] ; then
"$1_prompt_segment" "$0" "$2" "yellow" "$DEFAULT_COLOR" '' 0 '' "OF: ${${${wm_project_version:t}//\%/%%}//\\/\\\\}"
elif [[ -n "$wm_project_version" && -n "$wm_fork" ]] ; then
"$1_prompt_segment" "$0" "$2" "yellow" "$DEFAULT_COLOR" '' 0 '' "F-X: ${${${wm_project_version:t}//\%/%%}//\\/\\\\}"
fi
}
################################################################
# Segment to display Swift version
prompt_swift_version() {
_p9k_cached_cmd_stdout swift --version || return
emulate -L zsh && setopt extendedglob
[[ $_P9K_RETVAL == (#b)[^[:digit:]]#([[:digit:].]##)* ]] || return
"$1_prompt_segment" "$0" "$2" "magenta" "white" 'SWIFT_ICON' 0 '' "${${match[1]//\%/%%}//\\/\\\\}"
}
################################################################
# dir_writable: Display information about the user's permission to write in the current directory
prompt_dir_writable() {
if [[ ! -w "$PWD" ]]; then
"$1_prompt_segment" "$0_FORBIDDEN" "$2" "red" "yellow1" 'LOCK_ICON' 0 '' ''
fi
}
################################################################
# Kubernetes Current Context/Namespace
# Set to false to truncate trailing "/default": "mycontext/default" will become "mycontext".
set_default POWERLEVEL9K_KUBECONTEXT_SHOW_DEFAULT_NAMESPACE true
# Defines context classes for the purpose of applying different styling to different contexts.
#
# POWERLEVEL9K_KUBECONTEXT_CLASSES must be an array with even number of elements. The first
# element in each pair defines a pattern against which the current context (in the format it is
# displayed in the prompt) gets matched. The second element defines context class. Patterns are
# tried in order. The first match wins.
#
# If a non-empty class <C> is assigned to a context, the segment is styled with
# POWERLEVEL9K_KUBECONTEXT_<U>_BACKGROUND and POWERLEVEL9K_KUBECONTEXT_<U>_FOREGROUND where <U> is
# uppercased <C>. Otherwise with POWERLEVEL9K_KUBECONTEXT_BACKGROUND and
# POWERLEVEL9K_KUBECONTEXT_FOREGROUND.
#
# Example: Use red background for contexts containing "prod", green for "testing" and yellow for
# everything else.
#
# POWERLEVEL9K_KUBECONTEXT_CLASSES=(
# '*prod*' prod
# '*testing*' testing
# '*' other)
#
# POWERLEVEL9K_KUBECONTEXT_PROD_BACKGROUND=red
# POWERLEVEL9K_KUBECONTEXT_TESTING_BACKGROUND=green
# POWERLEVEL9K_KUBECONTEXT_OTHER_BACKGROUND=yellow
set_default -a POWERLEVEL9K_KUBECONTEXT_CLASSES
prompt_kubecontext() {
(( $+commands[kubectl] )) || return
local cfg
local -a key
for cfg in ${(s.:.)${KUBECONFIG:-$HOME/.kube/config}}; do
local -H stat
zstat -H stat -- $cfg 2>/dev/null || continue
key+=($cfg $stat[inode] $stat[mtime] $stat[size] $stat[mode])
done
if ! _p9k_cache_get $0 "${key[@]}"; then
local ctx=$(command kubectl config view -o=jsonpath='{.current-context}')
if [[ -n $ctx ]]; then
local p="{.contexts[?(@.name==\"$ctx\")].context.namespace}"
local ns="${$(command kubectl config view -o=jsonpath=$p):-default}"
if [[ $ctx != $ns && ($ns != default || $POWERLEVEL9K_KUBECONTEXT_SHOW_DEFAULT_NAMESPACE == true) ]]; then
ctx+="/$ns"
fi
fi
local suf
if [[ -n $ctx ]]; then
local pat class
for pat class in $POWERLEVEL9K_KUBECONTEXT_CLASSES; do
if [[ $ctx == ${~pat} ]]; then
[[ -n $class ]] && suf=_${(U)class}
break
fi
done
fi
_p9k_cache_set "$ctx" "$suf"
fi
[[ -n $_P9K_CACHE_VAL[1] ]] || return
$1_prompt_segment $0$_P9K_CACHE_VAL[2] $2 magenta white KUBERNETES_ICON 0 '' "${${_P9K_CACHE_VAL[1]//\%/%%}//\\/\\\\}"
}
################################################################
# Dropbox status
prompt_dropbox() {
(( $+commands[dropbox-cli] )) || return
# The first column is just the directory, so cut it
local dropbox_status="$(command dropbox-cli filestatus . | cut -d\ -f2-)"
# Only show if the folder is tracked and dropbox is running
if [[ "$dropbox_status" != 'unwatched' && "$dropbox_status" != "isn't running!" ]]; then
# If "up to date", only show the icon
if [[ "$dropbox_status" =~ 'up to date' ]]; then
dropbox_status=""
fi
"$1_prompt_segment" "$0" "$2" "white" "blue" "DROPBOX_ICON" 0 '' "${${dropbox_status//\%/%%}//\\/\\\\}"
fi
}
# Specifies the format of java version.
#
# POWERLEVEL9K_JAVA_VERSION_FULL=true => 1.8.0_212-8u212-b03-0ubuntu1.18.04.1-b03
# POWERLEVEL9K_JAVA_VERSION_FULL=false => 1.8.0_212
#
# These correspond to `java -fullversion` and `java -version` respectively.
set_default POWERLEVEL9K_JAVA_VERSION_FULL true
# print Java version number
prompt_java_version() {
_p9k_cached_cmd_stdout_stderr java -fullversion || return
local v=$_P9K_RETVAL
v=${${v#*\"}%\"*}
[[ $POWERLEVEL9K_JAVA_VERSION_FULL == true ]] || v=${v%%-*}
[[ -n $v ]] || return
"$1_prompt_segment" "$0" "$2" "red" "white" "JAVA_ICON" 0 '' "${${v//\%/%%}//\\/\\\\}"
}
################################################################
# Prompt processing and drawing
################################################################
# Main prompt
set_default -a POWERLEVEL9K_LEFT_PROMPT_ELEMENTS context dir vcs
# Returns 1 if the cursor is at the very end of the screen.
build_left_prompt() {
local -i index=1
local element
for element in "${POWERLEVEL9K_LEFT_PROMPT_ELEMENTS[@]}"; do
# Remove joined information in direct calls
element=${element%_joined}
# Check if it is a custom command, otherwise interpet it as
# a prompt.
if [[ $element == custom_* ]]; then
"prompt_custom" "left" "$index" $element[8,-1]
else
(( $+functions[prompt_$element] )) && "prompt_$element" "left" "$index"
fi
((++index))
done
_p9k_get_icon LEFT_SEGMENT_END_SEPARATOR
_p9k_left_prompt_end_line $_P9K_RETVAL
}
# Right prompt
set_default -a POWERLEVEL9K_RIGHT_PROMPT_ELEMENTS status root_indicator background_jobs history time
build_right_prompt() {
local -i index=1
local element
for element in "${POWERLEVEL9K_RIGHT_PROMPT_ELEMENTS[@]}"; do
# Remove joined information in direct calls
element=${element%_joined}
# Check if it is a custom command, otherwise interpet it as
# a prompt.
if [[ $element == custom_* ]]; then
"prompt_custom" "right" "$index" $element[8,-1]
else
(( $+functions[prompt_$element] )) && "prompt_$element" "right" "$index"
fi
((++index))
done
}
typeset -gF _P9K_TIMER_START
powerlevel9k_preexec() {
if (( _P9K_EMULATE_ZERO_RPROMPT_INDENT )); then
if [[ -n $_P9K_REAL_ZLE_RPROMPT_INDENT ]]; then
ZLE_RPROMPT_INDENT=$_P9K_REAL_ZLE_RPROMPT_INDENT
else
unset ZLE_RPROMPT_INDENT
fi
fi
_P9K_TIMER_START=$EPOCHREALTIME
}
typeset -g _P9K_PROMPT
typeset -g _P9K_RPROMPT
typeset -g _P9K_LEFT_PREFIX
typeset -g _P9K_LEFT_SUFFIX
typeset -g _P9K_RIGHT_PREFIX
typeset -g _P9K_RIGHT_SUFFIX
set_default POWERLEVEL9K_DISABLE_RPROMPT false
function _p9k_set_prompt() {
emulate -L zsh
PROMPT=
RPROMPT=
if [[ $POWERLEVEL9K_DISABLE_RPROMPT == true ]]; then
_P9K_RPROMPT_DONE=1
else
_P9K_PROMPT=
build_right_prompt
local right=$_P9K_RIGHT_PREFIX$_P9K_PROMPT$_P9K_RIGHT_SUFFIX
if [[ $POWERLEVEL9K_PROMPT_ON_NEWLINE != true || $POWERLEVEL9K_RPROMPT_ON_NEWLINE == true ]]; then
RPROMPT=$right
_P9K_RPROMPT_DONE=1
else
unset _P9K_RPROMPT_OVERRIDE
PROMPT="\${\${_P9K_RPROMPT::=\${_P9K_RPROMPT_OVERRIDE-$right}}+}"
_P9K_RPROMPT_DONE=0
fi
fi
_P9K_PROMPT=''
if build_left_prompt; then
PROMPT+=$_P9K_LEFT_PREFIX$_P9K_PROMPT$_P9K_LEFT_SUFFIX
else
PROMPT+=$_P9K_LEFT_PREFIX$_P9K_PROMPT${_P9K_LEFT_SUFFIX#$'\n'}
fi
PROMPT=${PROMPT//$' %{\b'/'%{%G'}
RPROMPT=${RPROMPT//$' %{\b'/'%{%G'}
_P9K_REAL_ZLE_RPROMPT_INDENT=
}
typeset -g _P9K_REFRESH_REASON
function _p9k_update_prompt() {
(( _P9K_ENABLED )) || return
_P9K_REFRESH_REASON=$1
_p9k_set_prompt
_P9K_REFRESH_REASON=''
zle && zle .reset-prompt && zle -R
}
typeset -gi _P9K_REGION_ACTIVE
set_default POWERLEVEL9K_PROMPT_ADD_NEWLINE false
set_default POWERLEVEL9K_SHOW_RULER false
powerlevel9k_refresh_prompt_inplace() {
emulate -L zsh
_p9k_init
_P9K_REFRESH_REASON=precmd
_p9k_set_prompt
_P9K_REFRESH_REASON=''
}
powerlevel9k_prepare_prompts() {
_P9K_EXIT_CODE=$?
_P9K_PIPE_EXIT_CODES=( "$pipestatus[@]" )
_P9K_COMMAND_DURATION=$((EPOCHREALTIME - _P9K_TIMER_START))
_P9K_TIMER_START=1e10
_P9K_REGION_ACTIVE=0
unsetopt localoptions
prompt_opts=(cr percent sp subst)
setopt nopromptbang prompt{cr,percent,sp,subst}
powerlevel9k_refresh_prompt_inplace
}
function _p9k_zle_keymap_select() {
zle && zle .reset-prompt && zle -R
}
set_default POWERLEVEL9K_IGNORE_TERM_COLORS false
set_default POWERLEVEL9K_IGNORE_TERM_LANG false
set_default POWERLEVEL9K_DISABLE_GITSTATUS false
set_default -i POWERLEVEL9K_VCS_MAX_INDEX_SIZE_DIRTY -1
set_default -i POWERLEVEL9K_VCS_STAGED_MAX_NUM 1
set_default -i POWERLEVEL9K_VCS_UNSTAGED_MAX_NUM 1
set_default -i POWERLEVEL9K_VCS_UNTRACKED_MAX_NUM 1
set_default -i POWERLEVEL9K_VCS_COMMITS_AHEAD_MAX_NUM -1
set_default -i POWERLEVEL9K_VCS_COMMITS_BEHIND_MAX_NUM -1
typeset -g DEFAULT_COLOR
typeset -g DEFAULT_COLOR_INVERTED
typeset -g _P9K_REAL_ZLE_RPROMPT_INDENT
typeset -gi _P9K_INITIALIZED=0
typeset -gi _P9K_EMULATE_ZERO_RPROMPT_INDENT=0
typeset -g OS
typeset -g OS_ICON
typeset -g SED_EXTENDED_REGEX_PARAMETER
typeset -g _P9K_TIMER_FIFO
typeset -gi _P9K_TIMER_FD=0
typeset -gi _P9K_TIMER_PID=0
typeset -gi _P9K_TIMER_SUBSHELL=0
_p9k_init_timer() {
_p9k_start_timer() {
emulate -L zsh
setopt err_return no_bg_nice
_P9K_TIMER_FIFO=$(mktemp -u "${TMPDIR:-/tmp}"/p9k.$$.timer.pipe.XXXXXXXXXX)
mkfifo $_P9K_TIMER_FIFO
sysopen -rw -o cloexec,sync -u _P9K_TIMER_FD $_P9K_TIMER_FIFO
zsystem flock $_P9K_TIMER_FIFO
function _p9k_on_timer() {
emulate -L zsh
local dummy
while IFS='' read -t -u $_P9K_TIMER_FD dummy; do true; done
zle && zle .reset-prompt && zle -R
}
zle -F $_P9K_TIMER_FD _p9k_on_timer
# `kill -WINCH $$` is a workaround for a bug in zsh. After a background job completes, callbacks
# registered with `zle -F` stop firing until the user presses any key or the process receives a
# signal (any signal at all).
zsh -c "
zmodload zsh/system
while sleep 1 && ! zsystem flock -t 0 ${(q)_P9K_TIMER_FIFO} && kill -WINCH $$ && echo; do
true
done
command rm -f ${(q)_P9K_TIMER_FIFO}
" </dev/null >&$_P9K_TIMER_FD 2>/dev/null &!
_P9K_TIMER_PID=$!
_P9K_TIMER_SUBSHELL=$ZSH_SUBSHELL
function _p9k_kill_timer() {
emulate -L zsh
if (( ZSH_SUBSHELL == _P9K_TIMER_SUBSHELL )); then
(( _P9K_TIMER_PID )) && kill -- -$_P9K_TIMER_PID &>/dev/null
command rm -f $_P9K_TIMER_FIFO
fi
}
add-zsh-hook zshexit _p9k_kill_timer
}
if ! _p9k_start_timer ; then
echo "powerlevel10k: failed to initialize background timer" >&2
if (( _P9K_TIMER_FD )); then
zle -F $_P9K_TIMER_FD
exec {_P9K_TIMER_FD}>&-
_P9K_TIMER_FD=0
fi
if (( _P9K_TIMER_PID )); then
kill -- -$_P9K_TIMER_PID &>/dev/null
_P9K_TIMER_PID=0
fi
command rm -f $_P9K_TIMER_FIFO
_P9K_TIMER_FIFO=''
unset -f _p9k_on_timer
fi
}
# Does ZSH have a certain off-by-one bug that triggers when PROMPT overflows to a new line?
#
# Bug: https://github.com/zsh-users/zsh/commit/d8d9fee137a5aa2cf9bf8314b06895bfc2a05518.
# ZSH_PATCHLEVEL=zsh-5.4.2-159-gd8d9fee13. Released in 5.5.
#
# Fix: https://github.com/zsh-users/zsh/commit/64d13738357c9b9c212adbe17f271716abbcf6ea.
# ZSH_PATCHLEVEL=zsh-5.7.1-50-g64d137383.
#
# Test: PROMPT="${(pl:$((COLUMNS))::-:)}<%1(l.%2(l.FAIL.PASS).FAIL)> " zsh -dfis <<<exit
# Workaround: PROMPT="${(pl:$((COLUMNS))::-:)}%{%G%}<%1(l.%2(l.FAIL.PASS).FAIL)> " zsh -dfis <<<exit
function _p9k_prompt_overflow_bug() {
[[ $ZSH_PATCHLEVEL =~ '^zsh-5\.4\.2-([0-9]+)-' ]] && return $(( match[1] < 159 ))
[[ $ZSH_PATCHLEVEL =~ '^zsh-5\.7\.1-([0-9]+)-' ]] && return $(( match[1] >= 50 ))
is-at-least 5.5 && ! is-at-least 5.7.2
}
# Some people write POWERLEVEL9K_DIR_PATH_SEPARATOR='\uNNNN' instead of
# POWERLEVEL9K_DIR_PATH_SEPARATOR=$'\uNNNN'. There is no good reason for it and if we were
# starting from scratch we wouldn't perform automatic conversion from the former to the latter.
# But we aren't starting from scratch, so convert we do.
_p9k_init_strings() {
# To find candidates:
#
# egrep 'set_default [^-]' powerlevel9k.zsh-theme | egrep -v '(true|false)$'
_p9k_g_expand POWERLEVEL9K_ANACONDA_LEFT_DELIMITER
_p9k_g_expand POWERLEVEL9K_ANACONDA_RIGHT_DELIMITER
_p9k_g_expand POWERLEVEL9K_CONTEXT_TEMPLATE
_p9k_g_expand POWERLEVEL9K_DATE_FORMAT
_p9k_g_expand POWERLEVEL9K_DIR_PATH_SEPARATOR
_p9k_g_expand POWERLEVEL9K_HOME_FOLDER_ABBREVIATION
_p9k_g_expand POWERLEVEL9K_HOST_TEMPLATE
_p9k_g_expand POWERLEVEL9K_SHORTEN_DELIMITER
_p9k_g_expand POWERLEVEL9K_TIME_FORMAT
_p9k_g_expand POWERLEVEL9K_USER_TEMPLATE
_p9k_g_expand POWERLEVEL9K_VCS_LOADING_TEXT
_p9k_g_expand POWERLEVEL9K_VI_COMMAND_MODE_STRING
_p9k_g_expand POWERLEVEL9K_VI_INSERT_MODE_STRING
_p9k_g_expand POWERLEVEL9K_WHITESPACE_BETWEEN_LEFT_SEGMENTS
_p9k_g_expand POWERLEVEL9K_WHITESPACE_BETWEEN_RIGHT_SEGMENTS
}
_p9k_init() {
(( _P9K_INITIALIZED )) && return
_p9k_init_icons
_p9k_init_strings
function _$0_set_os() {
OS=$1
_p9k_get_icon $2
OS_ICON=$_P9K_RETVAL
}
trap "unfunction _$0_set_os" EXIT
if [[ $(uname -o 2>/dev/null) == Android ]]; then
_$0_set_os Android ANDROID_ICON
else
case $(uname) in
SunOS) _$0_set_os Solaris SUNOS_ICON;;
Darwin) _$0_set_os OSX APPLE_ICON;;
CYGWIN_NT-* | MSYS_NT-*) _$0_set_os Windows WINDOWS_ICON;;
FreeBSD|OpenBSD|DragonFly) _$0_set_os BSD FREEBSD_ICON;;
Linux)
OS='Linux'
local os_release_id
[[ -f /etc/os-release &&
"${(f)$((</etc/os-release) 2>/dev/null)}" =~ "ID=([A-Za-z]+)" ]] && os_release_id="${match[1]}"
case "$os_release_id" in
*arch*) _$0_set_os Linux LINUX_ARCH_ICON;;
*debian*) _$0_set_os Linux LINUX_DEBIAN_ICON;;
*raspbian*) _$0_set_os Linux LINUX_RASPBIAN_ICON;;
*ubuntu*) _$0_set_os Linux LINUX_UBUNTU_ICON;;
*elementary*) _$0_set_os Linux LINUX_ELEMENTARY_ICON;;
*fedora*) _$0_set_os Linux LINUX_FEDORA_ICON;;
*coreos*) _$0_set_os Linux LINUX_COREOS_ICON;;
*gentoo*) _$0_set_os Linux LINUX_GENTOO_ICON;;
*mageia*) _$0_set_os Linux LINUX_MAGEIA_ICON;;
*centos*) _$0_set_os Linux LINUX_CENTOS_ICON;;
*opensuse*|*tumbleweed*) _$0_set_os Linux LINUX_OPENSUSE_ICON;;
*sabayon*) _$0_set_os Linux LINUX_SABAYON_ICON;;
*slackware*) _$0_set_os Linux LINUX_SLACKWARE_ICON;;
*linuxmint*) _$0_set_os Linux LINUX_MINT_ICON;;
*alpine*) _$0_set_os Linux LINUX_ALPINE_ICON;;
*aosc*) _$0_set_os Linux LINUX_AOSC_ICON;;
*nixos*) _$0_set_os Linux LINUX_NIXOS_ICON;;
*devuan*) _$0_set_os Linux LINUX_DEVUAN_ICON;;
*manjaro*) _$0_set_os Linux LINUX_MANJARO_ICON;;
*) _$0_set_os Linux LINUX_ICON;;
esac
;;
esac
fi
if [[ $POWERLEVEL9K_COLOR_SCHEME == light ]]; then
DEFAULT_COLOR=white
DEFAULT_COLOR_INVERTED=black
else
DEFAULT_COLOR=black
DEFAULT_COLOR_INVERTED=white
fi
typeset -gA _P9K_BATTERY_STATES=(
'low' 'red'
'charging' 'yellow'
'charged' 'green'
'disconnected' "$DEFAULT_COLOR_INVERTED"
)
local i
for ((i = 2; i <= $#POWERLEVEL9K_LEFT_PROMPT_ELEMENTS; ++i)); do
local elem=$POWERLEVEL9K_LEFT_PROMPT_ELEMENTS[$i]
if [[ $elem == *_joined ]]; then
_P9K_LEFT_JOIN+=$_P9K_LEFT_JOIN[((i-1))]
else
_P9K_LEFT_JOIN+=$i
fi
done
for ((i = 2; i <= $#POWERLEVEL9K_RIGHT_PROMPT_ELEMENTS; ++i)); do
local elem=$POWERLEVEL9K_RIGHT_PROMPT_ELEMENTS[$i]
if [[ $elem == *_joined ]]; then
_P9K_RIGHT_JOIN+=$_P9K_RIGHT_JOIN[((i-1))]
else
_P9K_RIGHT_JOIN+=$i
fi
done
if [[ $POWERLEVEL9K_EXPERIMENTAL_TIME_REALTIME == true ]]; then
_p9k_init_timer
fi
# Bug fixed in: https://github.com/zsh-users/zsh/commit/3eea35d0853bddae13fa6f122669935a01618bf9.
# If affects most terminals when RPROMPT is non-empty and ZLE_RPROMPT_INDENT is zero.
# We can work around it as long as RPROMPT ends with a space.
if [[ ($POWERLEVEL9K_RPROMPT_ON_NEWLINE == true || $POWERLEVEL9K_PROMPT_ON_NEWLINE == false) &&
$POWERLEVEL9K_WHITESPACE_BETWEEN_RIGHT_SEGMENTS == ' ' && $ZLE_RPROMPT_INDENT == 0 ]] &&
! is-at-least 5.7.2; then
_P9K_EMULATE_ZERO_RPROMPT_INDENT=1
_P9K_LEFT_PREFIX+='${${:-${_P9K_REAL_ZLE_RPROMPT_INDENT:=$ZLE_RPROMPT_INDENT}${ZLE_RPROMPT_INDENT::=1}}+}'
_P9K_RIGHT_SUFFIX+='%E'
fi
_P9K_ALIGNED_RPROMPT='${${:-${_P9K_X::=0}${_P9K_Y::=1024}${_P9K_CLM::=$COLUMNS}${COLUMNS::=1024}'
repeat 10; do
_P9K_ALIGNED_RPROMPT+='${_P9K_M::=$(((_P9K_X+_P9K_Y)/2))}'
_P9K_ALIGNED_RPROMPT+='${_P9K_XY::=${${(%):-$_P9K_RPROMPT%$_P9K_M(l./$_P9K_M;$_P9K_Y./$_P9K_X;$_P9K_M)}##*/}}'
_P9K_ALIGNED_RPROMPT+='${_P9K_X::=${_P9K_XY%;*}}'
_P9K_ALIGNED_RPROMPT+='${_P9K_Y::=${_P9K_XY#*;}}'
done
_P9K_ALIGNED_RPROMPT+='${COLUMNS::=_P9K_CLM}'
_P9K_ALIGNED_RPROMPT+='${_P9K_X::=$((_P9K_X+2+_P9K_IND))}'
_P9K_ALIGNED_RPROMPT+='${_P9K_Y::=$((_P9K_X+31))}}+}'
repeat 32; do
_P9K_ALIGNED_RPROMPT+='%-$_P9K_Y(l. .)'
done
repeat 32; do
_P9K_ALIGNED_RPROMPT+='%-$_P9K_X(l. .)'
done
_P9K_ALIGNED_RPROMPT+='%$(((COLUMNS-_P9K_X+2)*(COLUMNS+2>=_P9K_X)))'
_P9K_ALIGNED_RPROMPT+=$'(l.\n. ${_P9K_RPROMPT//)/%)}$_P9K_T[$((3+!_P9K_IND))])'
_P9K_LEFT_PREFIX+='${${_P9K_IND::=${${ZLE_RPROMPT_INDENT:-1}/#-*/0}}+}'
if [[ $POWERLEVEL9K_PROMPT_ADD_NEWLINE == true ]]; then
repeat ${POWERLEVEL9K_PROMPT_ADD_NEWLINE_COUNT:-1} _P9K_LEFT_PREFIX+=$'\n'
fi
if [[ $POWERLEVEL9K_SHOW_RULER == true ]]; then
_p9k_get_icon RULER_CHAR
local ruler_char=$_P9K_RETVAL
_p9k_prompt_length $ruler_char
if (( _P9K_RETVAL == 1 && $#ruler_char == 1 )); then
_p9k_color "" prompt_ruler BACKGROUND
_p9k_background $_P9K_RETVAL
_P9K_LEFT_PREFIX+=$_P9K_RETVAL
_p9k_color "" prompt_ruler FOREGROUND
_p9k_foreground $_P9K_RETVAL
_P9K_LEFT_PREFIX+=$_P9K_RETVAL
[[ $ruler_char == '.' ]] && local sep=',' || local sep='.'
local ruler_len='${$((COLUMNS-_P9K_IND))/#-*/0}'
_P9K_LEFT_PREFIX+="%b\${(pl$sep$ruler_len$sep$sep${(q)ruler_char}$sep)}%k%f"
_P9K_LEFT_PREFIX+='$_P9K_T[$((3+!_P9K_IND))]'
else
print -P "%F{red}WARNING!%f %BPOWERLEVEL9K_RULER_CHAR%b is not one character long. Ruler won't be rendered."
print -P "Either change the value of %BPOWERLEVEL9K_RULER_CHAR%b or set %BPOWERLEVEL9K_SHOW_RULER=false%b to"
print -P "disable ruler."
fi
fi
if [[ $ITERM_SHELL_INTEGRATION_INSTALLED == Yes ]]; then
_P9K_LEFT_PREFIX+="%{$(iterm2_prompt_mark)%}"
fi
_P9K_LEFT_PREFIX+='${${_P9K_BG::=NONE}+}${${_P9K_I::=0}+}'
_P9K_RIGHT_PREFIX+='${${_P9K_BG::=NONE}+}${${_P9K_I::=0}+}'
_p9k_get_icon LEFT_SEGMENT_SEPARATOR
_P9K_T=("%f$_P9K_RETVAL" "" $'\n')
_p9k_prompt_overflow_bug && _P9K_T+='%{%G%}' || _P9K_T+=''
_P9K_RIGHT_SUFFIX+='%f%b%k'
_P9K_RIGHT_PREFIX+='%f%b%k'
if [[ $POWERLEVEL9K_PROMPT_ON_NEWLINE == true ]]; then
_p9k_get_icon MULTILINE_FIRST_PROMPT_PREFIX
_P9K_LEFT_PREFIX+="$_P9K_RETVAL%f%b%k"
_p9k_get_icon MULTILINE_LAST_PROMPT_PREFIX
_P9K_LEFT_SUFFIX+=$'\n'$_P9K_RETVAL
if [[ $POWERLEVEL9K_RPROMPT_ON_NEWLINE != true && -o TRANSIENT_RPROMPT ]]; then
if is-at-least 5.3; then
function _p9k_zle_line_finish() {
[[ -o TRANSIENT_RPROMPT ]] || return
_P9K_RPROMPT_OVERRIDE=
zle && zle .reset-prompt && zle -R
}
autoload -Uz add-zle-hook-widget
zle -N _p9k_zle_line_finish
add-zle-hook-widget line-finish _p9k_zle_line_finish
add-zle-hook-widget -D line-finish user:_zsh_highlight_widget_orig-\*
add-zle-hook-widget -D line-finish user:_zsh_autosuggest_bound_\*
fi
fi
else
_P9K_LEFT_PREFIX+="%f%b%k"
fi
# If the terminal `LANG` is set to `C`, this theme will not work at all.
if [[ $LANG == "C" && $POWERLEVEL9K_IGNORE_TERM_LANG == false ]]; then
print -P "\t%F{red}WARNING!%f Your terminal's 'LANG' is set to 'C', which breaks this theme!"
print -P "\t%F{red}WARNING!%f Please set your 'LANG' to a UTF-8 language, like 'en_US.UTF-8'"
print -P "\t%F{red}WARNING!%f _before_ loading this theme in your \~\.zshrc. Putting"
print -P "\t%F{red}WARNING!%f %F{blue}export LANG=\"en_US.UTF-8\"%f at the top of your \~\/.zshrc is sufficient."
print -P 'Set POWERLEVEL9K_IGNORE_TERM_LANG=true to suppress this warning.'
fi
# Display a warning if the terminal does not support 256 colors.
if [[ $POWERLEVEL9K_IGNORE_TERM_COLORS == false ]]; then
if zmodload zsh/terminfo 2>/dev/null && (( $+terminfo[colors] && $terminfo[colors] < 256 )); then
print -P '%F{red}WARNING!%f Your terminal appears to support fewer than 256 colors!'
print -P 'If your terminal supports 256 colors, please export the appropriate environment variable.'
print -P 'In most terminal emulators, adding %F{blue}export TERM=xterm-256color%f to your %F{yellow}~/.zshrc%f is sufficient.'
print -P 'Set %F{blue}POWERLEVEL9K_IGNORE_TERM_COLORS=true%f to suppress this warning.'
fi
fi
if segment_in_use longstatus; then
print -P '%F{yellow}WARNING!%f The "longstatus" segment is deprecated. Use "%F{blue}status%f" instead.'
print -P 'For more informations, have a look at https://github.com/bhilburn/powerlevel9k/blob/master/CHANGELOG.md.'
fi
if segment_in_use vcs; then
powerlevel9k_vcs_init
if [[ $POWERLEVEL9K_DISABLE_GITSTATUS != true ]] && (( ${POWERLEVEL9K_VCS_BACKENDS[(I)git]} )); then
source ${POWERLEVEL9K_GITSTATUS_DIR:-${_p9k_installation_dir}/gitstatus}/gitstatus.plugin.zsh
gitstatus_start \
-s ${POWERLEVEL9K_VCS_MAX_NUM_STAGED:-$POWERLEVEL9K_VCS_STAGED_MAX_NUM} \
-u ${POWERLEVEL9K_VCS_MAX_NUM_UNSTAGED:-$POWERLEVEL9K_VCS_UNSTAGED_MAX_NUM} \
-d ${POWERLEVEL9K_VCS_MAX_NUM_UNTRACKED:-$POWERLEVEL9K_VCS_UNTRACKED_MAX_NUM} \
-m $POWERLEVEL9K_VCS_MAX_INDEX_SIZE_DIRTY \
POWERLEVEL9K
fi
fi
if segment_in_use vi_mode && (( $+POWERLEVEL9K_VI_VISUAL_MODE_STRING )); then
if is-at-least 5.3; then
function _p9k_zle_line_pre_redraw() {
[[ $KEYMAP == vicmd ]] &&
[[ ${REGION_ACTIVE:-0} != $_P9K_REGION_ACTIVE ]] &&
_P9K_REGION_ACTIVE=${REGION_ACTIVE:-0} &&
zle && zle .reset-prompt && zle -R
}
autoload -Uz add-zle-hook-widget
add-zle-hook-widget line-pre-redraw _p9k_zle_line_pre_redraw
add-zle-hook-widget -D line-pre-redraw user:_zsh_highlight_widget_orig-\*
add-zle-hook-widget -D line-pre-redraw user:_zsh_autosuggest_bound_\*
_p9k_g_expand POWERLEVEL9K_VI_VISUAL_MODE_STRING
else
>&2 print -P '%F{yellow}WARNING!%f POWERLEVEL9K_VI_VISUAL_MODE_STRING requires ZSH >= 5.3.'
>&2 print -r "Your zsh version is $ZSH_VERSION. Either upgrade zsh or unset POWERLEVEL9K_VI_VISUAL_MODE_STRING."
fi
fi
if segment_in_use dir &&
[[ $POWERLEVEL9K_SHORTEN_STRATEGY == truncate_with_package_name && $+commands[jq] == 0 ]]; then
>&2 print -P '%F{yellow}WARNING!%f %BPOWERLEVEL9K_SHORTEN_STRATEGY=truncate_with_package_name%b requires %F{green}jq%f.'
>&2 print -P 'Either install %F{green}jq%f or change the value of %BPOWERLEVEL9K_SHORTEN_STRATEGY%b.'
fi
zle -N zle-keymap-select _p9k_zle_keymap_select
_P9K_INITIALIZED=1
}
typeset -gi _P9K_ENABLED=0
prompt_powerlevel9k_setup() {
prompt_powerlevel9k_teardown
add-zsh-hook precmd powerlevel9k_prepare_prompts
add-zsh-hook preexec powerlevel9k_preexec
_P9K_TIMER_START=1e10
_P9K_ENABLED=1
}
prompt_powerlevel9k_teardown() {
add-zsh-hook -D precmd powerlevel9k_\*
add-zsh-hook -D preexec powerlevel9k_\*
PROMPT='%m%# '
RPROMPT=
_P9K_ENABLED=0
}
autoload -U colors && colors
autoload -Uz add-zsh-hook
zmodload zsh/datetime
zmodload zsh/mathfunc
zmodload zsh/system
zmodload -F zsh/stat b:zstat
prompt_powerlevel9k_setup
